Date: Thu, 27 Feb 2025 15:28:59 +0100 From: Andrea Venturoli <ml@netfence.it> To: "Bjoern A. Zeeb" <bz@FreeBSD.org> Cc: FreeBSD wireless mailing list <wireless@freebsd.org> Subject: Re: iwlwifi / rtw88 / rtw89 hw crypto request for test (precon for HT/VHT) Message-ID: <8c3a279e-06ef-4368-b80c-68d4b9746e6f@netfence.it> In-Reply-To: <e65a4bcb-fa76-4237-9c7c-bf4d828108b6@netfence.it> References: <o5965196-r5op-no6o-16ps-s094r7483p70@SerrOFQ.bet> <93f228db-8bdc-44f6-bb06-3f0261e67636@netfence.it> <5rooqrn1-3ppq-826n-00q2-6233n72p82o7@SerrOFQ.bet> <e65a4bcb-fa76-4237-9c7c-bf4d828108b6@netfence.it>
index | next in thread | previous in thread | raw e-mail
On 2/19/25 08:17, Andrea Venturoli wrote:
>>> I've seen cherry-picking it is possible with just a few manual
>>> adjustment...
>>
>> You can certainly do that. And that should work.
>>
>> It'll likely be easier to cherrypick from stable/ once things are merged
>> (especially if you keep the merge order).
>
> OK, so it seems answer is no (even if it applies almost cleanly).
> I'll wait a few day ands try to merge all the relevant commits from 14-
> stable.
> Thanks.
Hello again.
Since this has landed in 14-STABLE, I tried this merge for fun.
To be clear: I applied to 14.2 all your commits from 14-STABLE after
14.2 was released.
This almost went cleanly and I had only one little thing to fix in order
to be able to compile.
System came up perfectly and, after very brief and insufficient testing,
still seems to work.
Then I set compat.linuxkpi.80211.hw_crypto=1.
First strange thing: "ifconfig wlan0" output doesn't differ; it' still
says "54Mbps" and "11g".
WiFi doesn't seem to work properly, as I cannot even ssh into the
machine (hangs after some startup messages).
Also I started seeing a lot of messages that invite me to report to PR
274382.
I'll eventually try in other networks, if I can.
Fine, this was just a test for fun.
Either I did something wrong or it just can't work on 14.2.
If it's the latter, I can wait for 14.3.
Now, the real question: are you interested in such reports in 274382?
Given the "unofficial" (to say the least) state of my kernel, I'm not sure.
bye & Thanks
av.
P.S.
pciconf -lv:
iwlwifi0@pci0:0:12:0: class=0x028000 rev=0x06 hdr=0x00 vendor=0x8086
device=0x31dc subvendor=0x8086 subdevice=0x0264
vendor = 'Intel Corporation'
device = 'Gemini Lake PCH CNVi WiFi'
class = network
dmesg:
iwlwifi0: <iwlwifi> mem 0x91118000-0x9111bfff at device 12.0 on pci0
iwlwifi0: Detected crf-id 0x2816, cnv-id 0x1000100 wfpm id 0x80000000
iwlwifi0: PCI dev 31dc/0264, rev=0x312, rfid=0x108110
iwlwifi0: Detected Intel(R) Wireless-AC 9461
iwlwifi0: successfully loaded firmware image
'iwlwifi-9000-pu-b0-jf-b0-46.ucode'
iwlwifi0: WRT: Overriding region id 0
iwlwifi0: WRT: Overriding region id 1
iwlwifi0: WRT: Overriding region id 2
iwlwifi0: WRT: Overriding region id 3
iwlwifi0: WRT: Overriding region id 4
iwlwifi0: WRT: Overriding region id 6
iwlwifi0: WRT: Overriding region id 8
iwlwifi0: WRT: Overriding region id 9
iwlwifi0: WRT: Overriding region id 10
iwlwifi0: WRT: Overriding region id 11
iwlwifi0: WRT: Overriding region id 15
iwlwifi0: WRT: Overriding region id 16
iwlwifi0: WRT: Overriding region id 18
iwlwifi0: WRT: Overriding region id 19
iwlwifi0: WRT: Overriding region id 20
iwlwifi0: WRT: Overriding region id 21
iwlwifi0: WRT: Overriding region id 28
iwl-debug-yoyo.bin: could not load binary firmware
/boot/firmware/iwl-debug-yoyo.bin either
iwl-debug-yoyo.bin: could not load binary firmware
/boot/firmware/iwl-debug-yoyo.bin either
iwl-debug-yoyo_bin: could not load binary firmware
/boot/firmware/iwl-debug-yoyo_bin either
iwl_debug_yoyo_bin: could not load binary firmware
/boot/firmware/iwl_debug_yoyo_bin either
iwlwifi0: loaded firmware version 46.ff18e32a.0
9000-pu-b0-jf-b0-46.ucode op_mode iwlmvm
iwlwifi0: base HW address: 20:1e:88:78:ac:3a, OTP minor version: 0x4
The warning about "iwl-debug-yoyo.bin" always happens, with our without
the latest commits.
home |
help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?8c3a279e-06ef-4368-b80c-68d4b9746e6f>