Date: 01 Oct 2002 15:05:23 +1000 From: Mark Sergeant <sarge@snsonline.net> To: freebsd-stable@freebsd.org Subject: PCM broken in 4.7RC Message-ID: <1033448723.485.13.camel@xyzzy.intranet.snsonline.net>
next in thread | raw e-mail | index | archive | help
When compiled in or kldloaded PCM hangs the machine (either during boot,
or when loaded).
When booting no error message is displayed, when kldloaded the it tries
to attach and comes back with...
device_probe_and_attach: pcm0 attatch returned 6
the machine then hangs.
the following is a kernel without pcm's dmesg output.
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights
reserved.
FreeBSD 4.7-RC #1: Tue Oct 1 14:33:22 EST 2002
root@xyzzy.intranet.snsonline.net:/usr/src/sys/compile/XYZZY
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (747.73-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x68a Stepping = 10
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PA
T,PSE36,MMX,FXSR,SSE>
real memory = 385220608 (376192K bytes)
avail memory = 370761728 (362072K bytes)
Preloaded elf kernel "kernel" at 0xc03ab000.
netsmb_dev: loaded
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 9 entries at 0xc00f01d0
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <AcerLabs M5247 PCI-PCI(AGP Supported) bridge> at device 1.0 on
pci0
pci1: <PCI bus> on pcib1
pci1: <Trident model 8820 VGA-compatible display device> at 0.0 irq 11
ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem
0xf7eff000-0xf7efffff irq
11 at device 2.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ums0: Logitech USB Mouse, rev 1.10/6.20, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
uplcom0: ATEN International Serial adapter, rev 1.10/0.01, addr 3
atapci0: <AcerLabs Aladdin ATA66 controller> port 0xeff0-0xefff at
device 4.0 on
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <unknown card> (vendor=0x10b9, dev=0x5451) at 6.0
isab0: <AcerLabs M1533 portable PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
chip1: <AcerLabs M15x3 Power Management Unit> at device 8.0 on pci0
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xeec0-0xeeff mem
0xf7d00000-0xf7dfffff,0xf7efe000-0xf7efefff irq 11 at device 10.0 on
pci0
fxp0: Ethernet address 00:00:39:e5:31:9a
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci_cfgintr_linked: linked (3) to hard-routed irq 11
pci_cfgintr: 0:16 INTA routed to irq 11
pcic0: <TI PCI-1410 PCI-CardBus Bridge> irq 11 at device 16.0 on pci0
pcic0: PCI Memory allocated: 0x88000000
pcic0: TI12XX PCI Config Reg: [pwr save][pci only]
pccard0: <PC Card 16-bit bus (classic)> on pcic0
pci_cfgintr_linked: linked (1) to hard-routed irq 11
pci_cfgintr: 0:17 INTA routed to irq 11
pcic1: <Toshiba ToPIC100 PCI-CardBus Bridge> irq 11 at device 17.0 on
pci0
pcic1: PCI Memory allocated: 0x88001000
pccard1: <PC Card 16-bit bus (classic)> on pcic1
pci_cfgintr_linked: linked (2) to hard-routed irq 11
pci_cfgintr: 0:17 INTB routed to irq 11
pcic2: <Toshiba ToPIC100 PCI-CardBus Bridge> irq 11 at device 17.1 on
pci0
pcic2: PCI Memory allocated: 0x88002000
pccard2: <PC Card 16-bit bus (classic)> on pcic2
pci0: <unknown card> (vendor=0x1179, dev=0x0805) at 18.0
orm0: <Option ROMs> at iomem 0xc0000-0xcbfff,0xe0000-0xeffff on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: parallel port not found.
ata1-slave: ATAPI identify retries exceeded
pccard: card inserted, slot 0
pccard: card removed, slot 0
ad0: 28615MB <IC25N030ATCS04-0> [58140/16/63] at ata0-master UDMA66
acd0: CD-RW <UJDA710> at ata1-master UDMA33
Mounting root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted
pccard: card inserted, slot 0
wi0 at port 0x240-0x27f irq 11 slot 0 on pccard0
wi0: 802.11 address: 00:02:2d:24:ec:d6
wi0: using Lucent Embedded WaveLAN/IEEE
wi0: Lucent Firmware: Station 6.14.01
Please note, sound was working fine up until I cvsup'ed n built the
latest release of 4.7RC, 2 weeks ago all was well and good.
The machine is a Toshiba portege 4000 running 4.7RC as of 2 hours ago.
--
Mark Sergeant
Senior Unix Systems Administrator
SNSOnline Technical Services
.:E - msergeant@snsonline.net
.:P - +61 (0) 4127 14263
.:D - http://www.snsonline.net/disclaimer/
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1033448723.485.13.camel>