Date: Fri, 2 Jan 2009 16:20:03 GMT From: "Oliver Pinter" <oliver.pntr@gmail.com> To: freebsd-amd64@FreeBSD.org Subject: Re: misc/130103: 7.1-RC X -> systemcrash Message-ID: <200901021620.n02GK3Po076163@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR amd64/130103; it has been noted by GNATS. From: "Oliver Pinter" <oliver.pntr@gmail.com> To: "Benjamin Stuppin" <benjamin_stuppin@yahoo.de> Cc: freebsd-gnats-submit@freebsd.org Subject: Re: misc/130103: 7.1-RC X -> systemcrash Date: Fri, 2 Jan 2009 16:46:01 +0100 Hi, I have this system: ASUS P5Q-E Intel Q9300 Sapphire RHD3450 4GB RAM I use FreeBSD 7.1RC2 from csup (20081223) and from xorg-video-driver-ati from ports, with this driver worked fine, without system crash, can you the ati driver use? On 1/2/09, Benjamin Stuppin <benjamin_stuppin@yahoo.de> wrote: > >>Number: 130103 >>Category: misc >>Synopsis: 7.1-RC X -> systemcrash >>Confidential: no >>Severity: non-critical >>Priority: low >>Responsible: freebsd-bugs >>State: open >>Quarter: >>Keywords: >>Date-Required: >>Class: sw-bug >>Submitter-Id: current-users >>Arrival-Date: Thu Jan 01 23:30:01 UTC 2009 >>Closed-Date: >>Last-Modified: >>Originator: Benjamin Stuppin >>Release: 7.1-RC2 amd64 >>Organization: >>Environment: > FreeBSD rechner.local.net 7.1-RC2 FreeBSD 7.1-RC2 #0: Tue Dec 23 11:42:13 > UTC 2008 root@driscoll.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC > amd64 > >>Description: > Hi, > when i install FreeBSD 7.1-RC1/2 and install X11 my system hangs up when i > startx -> logout -> startx > it also hung up after installing drm for radeonhd -> startx -> mplayer > <movie> -> fullscreen -> normal mode > > The System freezes so i can't do anything (lack another pc to test if only x > runs but sometime i also saw a kernel panic message when i was on terminal 1 > during a crash). > > I tryed it doing a installation from 7.1-RC DVD, all software installed from > DVD. (Full install X-Devel) > Also tryed minimal installation -> freebsd-update -> ports from cvs -> build > everything from source. > Also tryed radeon/radeonhd/ati drivers for my r5xx based ati card. > > 7.0 runs fine > > System: > Intel Core2quad Q6700 > Asus P5K SP/EPU > Ati Radeon x1300 (pcie) > > dmesg: > > Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM> > AMD Features=0x20100800<SYSCALL,NX,LM> > AMD Features2=0x1<LAHF> > Cores per package: 4 > usable memory = 4282462208 (4084 MB) > avail memory = 4121108480 (3930 MB) > ACPI APIC Table: <A_M_I_ OEMAPIC > > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 1 > cpu2 (AP): APIC ID: 2 > cpu3 (AP): APIC ID: 3 > ioapic0 <Version 2.0> irqs 0-23 on motherboard > kbd1 at kbdmux0 > ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) > hptrr: HPT RocketRAID controller driver v1.1 (Jan 1 2009 21:10:24) > acpi0: <A_M_I_ OEMXSDT> on motherboard > acpi0: [ITHREAD] > acpi0: Power Button (fixed) > acpi0: reservation of 0, a0000 (3) failed > acpi0: reservation of 100000, cff00000 (3) failed > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 > acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on > acpi0 > Timecounter "HPET" frequency 14318180 Hz quality 900 > cpu0: <ACPI CPU> on acpi0 > ACPI Warning (tbutils-0243): Incorrect checksum in table [OEMB] - 7F, > should be 76 [20070320] > est0: <Enhanced SpeedStep Frequency Control> on cpu0 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr a280a2806000a28 > device_attach: est0 attach returned 6 > p4tcc0: <CPU Frequency Thermal Control> on cpu0 > cpu1: <ACPI CPU> on acpi0 > est1: <Enhanced SpeedStep Frequency Control> on cpu1 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr a280a2806000a28 > device_attach: est1 attach returned 6 > p4tcc1: <CPU Frequency Thermal Control> on cpu1 > cpu2: <ACPI CPU> on acpi0 > est2: <Enhanced SpeedStep Frequency Control> on cpu2 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr a280a2806000a28 > device_attach: est2 attach returned 6 > p4tcc2: <CPU Frequency Thermal Control> on cpu2 > cpu3: <ACPI CPU> on acpi0 > est3: <Enhanced SpeedStep Frequency Control> on cpu3 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr a280a2806000a28 > device_attach: est3 attach returned 6 > p4tcc3: <CPU Frequency Thermal Control> on cpu3 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 > pci1: <ACPI PCI bus> on pcib1 > vgapci0: <VGA-compatible display> port 0xc000-0xc0ff mem > 0xd0000000-0xdfffffff,0xfe9e0000-0xfe9effff irq 16 at device 0.0 on pci1 > vgapci1: <VGA-compatible display> mem 0xfe9f0000-0xfe9fffff at device 0.1 on > pci1 > uhci0: <UHCI (generic) USB controller> port 0xb800-0xb81f irq 16 at device > 26.0 on pci0 > uhci0: [GIANT-LOCKED] > uhci0: [ITHREAD] > usb0: <UHCI (generic) USB controller> on uhci0 > usb0: USB revision 1.0 > uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 > uhub0: 2 ports with 2 removable, self powered > uhci1: <UHCI (generic) USB controller> port 0xb880-0xb89f irq 21 at device > 26.1 on pci0 > uhci1: [GIANT-LOCKED] > uhci1: [ITHREAD] > usb1: <UHCI (generic) USB controller> on uhci1 > usb1: USB revision 1.0 > uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 > uhub1: 2 ports with 2 removable, self powered > uhci2: <UHCI (generic) USB controller> port 0xbc00-0xbc1f irq 18 at device > 26.2 on pci0 > uhci2: [GIANT-LOCKED] > uhci2: [ITHREAD] > usb2: <UHCI (generic) USB controller> on uhci2 > usb2: USB revision 1.0 > uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 > uhub2: 2 ports with 2 removable, self powered > ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe8ffc00-0xfe8fffff irq 18 > at device 26.7 on pci0 > ehci0: [GIANT-LOCKED] > ehci0: [ITHREAD] > usb3: EHCI version 1.0 > usb3: companion controllers, 2 ports each: usb0 usb1 usb2 > usb3: <EHCI (generic) USB 2.0 controller> on ehci0 > usb3: USB revision 2.0 > uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3 > uhub3: 6 ports with 6 removable, self powered > pcm0: <Intel 82801I High Definition Audio Controller> mem > 0xfe8f8000-0xfe8fbfff irq 22 at device 27.0 on pci0 > pcm0: [ITHREAD] > pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 > pci3: <ACPI PCI bus> on pcib2 > pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0 > pci2: <ACPI PCI bus> on pcib3 > atapci0: <Marvell ATA controller> port > 0xdc00-0xdc07,0xd880-0xd883,0xd800-0xd807,0xd480-0xd483,0xd400-0xd40f mem > 0xfeaffc00-0xfeafffff irq 16 at device 0.0 on pci2 > atapci0: [ITHREAD] > ata2: <ATA channel 0> on atapci0 > ata2: [ITHREAD] > ata3: <ATA channel 1> on atapci0 > ata3: [ITHREAD] > uhci3: <UHCI (generic) USB controller> port 0xb080-0xb09f irq 23 at device > 29.0 on pci0 > uhci3: [GIANT-LOCKED] > uhci3: [ITHREAD] > usb4: <UHCI (generic) USB controller> on uhci3 > usb4: USB revision 1.0 > uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4 > uhub4: 2 ports with 2 removable, self powered > uhci4: <UHCI (generic) USB controller> port 0xb400-0xb41f irq 19 at device > 29.1 on pci0 > uhci4: [GIANT-LOCKED] > uhci4: [ITHREAD] > usb5: <UHCI (generic) USB controller> on uhci4 > usb5: USB revision 1.0 > uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5 > uhub5: 2 ports with 2 removable, self powered > uhci5: <UHCI (generic) USB controller> port 0xb480-0xb49f irq 18 at device > 29.2 on pci0 > uhci5: [GIANT-LOCKED] > uhci5: [ITHREAD] > usb6: <UHCI (generic) USB controller> on uhci5 > usb6: USB revision 1.0 > uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6 > uhub6: 2 ports with 2 removable, self powered > ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe8ff800-0xfe8ffbff irq 23 > at device 29.7 on pci0 > ehci1: [GIANT-LOCKED] > ehci1: [ITHREAD] > usb7: EHCI version 1.0 > usb7: companion controllers, 2 ports each: usb4 usb5 usb6 > usb7: <EHCI (generic) USB 2.0 controller> on ehci1 > usb7: USB revision 2.0 > uhub7: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb7 > uhub7: 6 ports with 6 removable, self powered > uhub7: port 6, set config at addr 2 failed > uhub7: device problem (INVAL), disabling port 6 > pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > pci4: <ACPI PCI bus> on pcib4 > xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xec00-0xec7f mem > 0xfebffc00-0xfebffc7f irq 16 at device 0.0 on pci4 > miibus0: <MII bus> on xl0 > xlphy0: <3Com internal media interface> PHY 24 on miibus0 > xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > xl0: Ethernet address: 00:10:5a:69:26:6b > xl0: [ITHREAD] > bktr0: <BrookTree 878> mem 0xfdffe000-0xfdffefff irq 17 at device 1.0 on > pci4 > bktr0: [GIANT-LOCKED] > bktr0: [ITHREAD] > bktr0: Hauppauge Model 61344 D221 > bktr0: Detected a MSP3415D-A2 at 0x80 > bktr0: Hauppauge WinCast/TV, Philips FR1216 PAL FM tuner, msp3400c stereo, > remote control. > pci4: <multimedia> at device 1.1 (no driver attached) > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > atapci1: <Intel ICH9 SATA300 controller> port > 0xa000-0xa007,0x9c00-0x9c03,0x9880-0x9887,0x9800-0x9803,0x9480-0x948f,0x9400-0x940f > irq 22 at device 31.2 on pci0 > atapci1: [ITHREAD] > ata4: <ATA channel 0> on atapci1 > ata4: [ITHREAD] > ata5: <ATA channel 1> on atapci1 > ata5: [ITHREAD] > pci0: <serial bus, SMBus> at device 31.3 (no driver attached) > atapci2: <Intel ICH9 SATA300 controller> port > 0xb000-0xb007,0xac00-0xac03,0xa880-0xa887,0xa800-0xa803,0xa480-0xa48f,0xa400-0xa40f > irq 22 at device 31.5 on pci0 > atapci2: [ITHREAD] > ata6: <ATA channel 0> on atapci2 > ata6: [ITHREAD] > ata7: <ATA channel 1> on atapci2 > ata7: [ITHREAD] > acpi_button0: <Power Button> on acpi0 > fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on > acpi0 > fdc0: [FILTER] > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > sio0: configured irq 4 not in bitmap of probed irqs 0 > sio0: port may not be enabled > sio0: configured irq 4 not in bitmap of probed irqs 0 > sio0: port may not be enabled > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on > acpi0 > sio0: type 16550A > sio0: [FILTER] > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > atkbd0: [ITHREAD] > ppc0: cannot reserve I/O port range > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > ums0: <Logitech USB Gaming Mouse, class 0/0, rev 2.00/52.00, addr 2> on > uhub2 > ums0: 16 buttons and Z dir. > uhid0: <Logitech USB Gaming Mouse, class 0/0, rev 2.00/52.00, addr 2> on > uhub2 > umass0: <Apacer Embedded Reader, class 0/0, rev 1.10/1.00, addr 2> on uhub5 > Timecounters tick every 1.000 msec > hptrr: no controller detected. > ad8: 476940MB <Hitachi HDP725050GLA360 GM4OA52A> at ata4-master SATA300 > ad10: 238475MB <HDT722525DLA380 V44OA9BA> at ata5-master SATA150 > GEOM_LABEL: Label for provider ad10s3 is ntfs/System. > acd0: DVDR <HL-DT-ST DVDRAM GH20LS15/JL00> at ata6-master SATA150 > ad14: 953869MB <WDC WD10EACS-00D6B0 01.01A01> at ata7-master SATA300 > pcm0: <HDA Codec: Realtek ALC883> > pcm0: <HDA Driver Revision: 20071129_0050> > SMP: AP CPU #1 Launched! > SMP: AP CPU #2 Launched! > SMP: AP CPU #3 Launched! > da0 at umass-sim0 bus 0 target 0 lun 0 > da0: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device > da0: 1.000MB/s transfers > da0: Attempt to query device size failed: NOT READY, Medium not present > da1 at umass-sim0 bus 0 target 0 lun 1 > da1: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device > da1: 1.000MB/s transfers > da1: Attempt to query device size failed: NOT READY, Medium not present > da2 at umass-sim0 bus 0 target 0 lun 2 > da2: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device > da2: 1.000MB/s transfers > da2: Attempt to query device size failed: NOT READY, Medium not present > da3 at umass-sim0 bus 0 target 0 lun 3 > da3: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device > da3: 1.000MB/s transfers > da3: Attempt to query device size failed: NOT READY, Medium not present > GEOM_LABEL: Label for provider acd0 is iso9660/CANOSCAN. > Trying to mount root from ufs:/dev/ad8s1a > WARNING: / was not properly dismounted > WARNING: /tmp was not properly dismounted > WARNING: /usr was not properly dismounted > WARNING: /var was not properly dismounted > WARNING: /lager was not properly dismounted > link_elf_obj: symbol devfs_get_cdevpriv undefined > kldload: Unsupported file type > link_elf_obj: symbol devfs_get_cdevpriv undefined > kldload: Unsupported file type > link_elf_obj: symbol devfs_get_cdevpriv undefined > kldload: Unsupported file type > link_elf_obj: symbol devfs_get_cdevpriv undefined > kldload: Unsupported file type > link_elf_obj: symbol devfs_get_cdevpriv undefined > kldload: Unsupported file type > warning: KLD '/boot/kernel/drm.ko' is newer than the linker.hints file > link_elf_obj: symbol devfs_get_cdevpriv undefined > kldload: Unsupported file type > warning: KLD '/boot/kernel/drm.ko' is newer than the linker.hints file > link_elf_obj: symbol devfs_get_cdevpriv undefined > kldload: Unsupported file type > warning: KLD '/boot/kernel/drm.ko' is newer than the linker.hints file > link_elf_obj: symbol devfs_get_cdevpriv undefined > kldload: Unsupported file type > warning: KLD '/boot/kernel/drm.ko' is newer than the linker.hints file > pid 749 (hald-addon-mouse-sy), uid 0: exited on signal 11 (core dumped) > Copyright (c) 1992-2008 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 7.0-RELEASE-p7 #1: Thu Jan 1 21:10:29 CET 2009 > root@rechner.local.net:/usr/obj/usr/src/sys/VEGA > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel(R) Core(TM)2 Quad CPU Q6700 @ 2.66GHz (2666.77-MHz K8-class > CPU) > Origin = "GenuineIntel" Id = 0x6fb Stepping = 11 > > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM> > AMD Features=0x20100800<SYSCALL,NX,LM> > AMD Features2=0x1<LAHF> > Cores per package: 4 > usable memory = 4282462208 (4084 MB) > avail memory = 4121108480 (3930 MB) > ACPI APIC Table: <A_M_I_ OEMAPIC > > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 1 > cpu2 (AP): APIC ID: 2 > cpu3 (AP): APIC ID: 3 > ioapic0 <Version 2.0> irqs 0-23 on motherboard > kbd1 at kbdmux0 > ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) > hptrr: HPT RocketRAID controller driver v1.1 (Jan 1 2009 21:10:24) > acpi0: <A_M_I_ OEMXSDT> on motherboard > acpi0: [ITHREAD] > acpi0: Power Button (fixed) > acpi0: reservation of 0, a0000 (3) failed > acpi0: reservation of 100000, cff00000 (3) failed > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 > acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on > acpi0 > Timecounter "HPET" frequency 14318180 Hz quality 900 > cpu0: <ACPI CPU> on acpi0 > ACPI Warning (tbutils-0243): Incorrect checksum in table [OEMB] - 7F, > should be 76 [20070320] > est0: <Enhanced SpeedStep Frequency Control> on cpu0 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr a280a2806000a28 > device_attach: est0 attach returned 6 > p4tcc0: <CPU Frequency Thermal Control> on cpu0 > cpu1: <ACPI CPU> on acpi0 > est1: <Enhanced SpeedStep Frequency Control> on cpu1 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr a280a2806000a28 > device_attach: est1 attach returned 6 > p4tcc1: <CPU Frequency Thermal Control> on cpu1 > cpu2: <ACPI CPU> on acpi0 > est2: <Enhanced SpeedStep Frequency Control> on cpu2 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr a280a2806000a28 > device_attach: est2 attach returned 6 > p4tcc2: <CPU Frequency Thermal Control> on cpu2 > cpu3: <ACPI CPU> on acpi0 > est3: <Enhanced SpeedStep Frequency Control> on cpu3 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr a280a2806000a28 > device_attach: est3 attach returned 6 > p4tcc3: <CPU Frequency Thermal Control> on cpu3 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 > pci1: <ACPI PCI bus> on pcib1 > vgapci0: <VGA-compatible display> port 0xc000-0xc0ff mem > 0xd0000000-0xdfffffff,0xfe9e0000-0xfe9effff irq 16 at device 0.0 on pci1 > vgapci1: <VGA-compatible display> mem 0xfe9f0000-0xfe9fffff at device 0.1 on > pci1 > uhci0: <UHCI (generic) USB controller> port 0xb800-0xb81f irq 16 at device > 26.0 on pci0 > uhci0: [GIANT-LOCKED] > uhci0: [ITHREAD] > usb0: <UHCI (generic) USB controller> on uhci0 > usb0: USB revision 1.0 > uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 > uhub0: 2 ports with 2 removable, self powered > uhci1: <UHCI (generic) USB controller> port 0xb880-0xb89f irq 21 at device > 26.1 on pci0 > uhci1: [GIANT-LOCKED] > uhci1: [ITHREAD] > usb1: <UHCI (generic) USB controller> on uhci1 > usb1: USB revision 1.0 > uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 > uhub1: 2 ports with 2 removable, self powered > uhci2: <UHCI (generic) USB controller> port 0xbc00-0xbc1f irq 18 at device > 26.2 on pci0 > uhci2: [GIANT-LOCKED] > uhci2: [ITHREAD] > usb2: <UHCI (generic) USB controller> on uhci2 > usb2: USB revision 1.0 > uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 > uhub2: 2 ports with 2 removable, self powered > ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe8ffc00-0xfe8fffff irq 18 > at device 26.7 on pci0 > ehci0: [GIANT-LOCKED] > ehci0: [ITHREAD] > usb3: EHCI version 1.0 > usb3: companion controllers, 2 ports each: usb0 usb1 usb2 > usb3: <EHCI (generic) USB 2.0 controller> on ehci0 > usb3: USB revision 2.0 > uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3 > uhub3: 6 ports with 6 removable, self powered > pcm0: <Intel 82801I High Definition Audio Controller> mem > 0xfe8f8000-0xfe8fbfff irq 22 at device 27.0 on pci0 > pcm0: [ITHREAD] > pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 > pci3: <ACPI PCI bus> on pcib2 > pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0 > pci2: <ACPI PCI bus> on pcib3 > atapci0: <Marvell ATA controller> port > 0xdc00-0xdc07,0xd880-0xd883,0xd800-0xd807,0xd480-0xd483,0xd400-0xd40f mem > 0xfeaffc00-0xfeafffff irq 16 at device 0.0 on pci2 > atapci0: [ITHREAD] > ata2: <ATA channel 0> on atapci0 > ata2: [ITHREAD] > ata3: <ATA channel 1> on atapci0 > ata3: [ITHREAD] > uhci3: <UHCI (generic) USB controller> port 0xb080-0xb09f irq 23 at device > 29.0 on pci0 > uhci3: [GIANT-LOCKED] > uhci3: [ITHREAD] > usb4: <UHCI (generic) USB controller> on uhci3 > usb4: USB revision 1.0 > uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4 > uhub4: 2 ports with 2 removable, self powered > uhci4: <UHCI (generic) USB controller> port 0xb400-0xb41f irq 19 at device > 29.1 on pci0 > uhci4: [GIANT-LOCKED] > uhci4: [ITHREAD] > usb5: <UHCI (generic) USB controller> on uhci4 > usb5: USB revision 1.0 > uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5 > uhub5: 2 ports with 2 removable, self powered > uhci5: <UHCI (generic) USB controller> port 0xb480-0xb49f irq 18 at device > 29.2 on pci0 > uhci5: [GIANT-LOCKED] > uhci5: [ITHREAD] > usb6: <UHCI (generic) USB controller> on uhci5 > usb6: USB revision 1.0 > uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6 > uhub6: 2 ports with 2 removable, self powered > ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe8ff800-0xfe8ffbff irq 23 > at device 29.7 on pci0 > ehci1: [GIANT-LOCKED] > ehci1: [ITHREAD] > usb7: EHCI version 1.0 > usb7: companion controllers, 2 ports each: usb4 usb5 usb6 > usb7: <EHCI (generic) USB 2.0 controller> on ehci1 > usb7: USB revision 2.0 > uhub7: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb7 > uhub7: 6 ports with 6 removable, self powered > uhub7: port 6, set config at addr 2 failed > uhub7: device problem (INVAL), disabling port 6 > pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > pci4: <ACPI PCI bus> on pcib4 > xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xec00-0xec7f mem > 0xfebffc00-0xfebffc7f irq 16 at device 0.0 on pci4 > miibus0: <MII bus> on xl0 > xlphy0: <3Com internal media interface> PHY 24 on miibus0 > xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > xl0: Ethernet address: 00:10:5a:69:26:6b > xl0: [ITHREAD] > bktr0: <BrookTree 878> mem 0xfdffe000-0xfdffefff irq 17 at device 1.0 on > pci4 > bktr0: [GIANT-LOCKED] > bktr0: [ITHREAD] > bktr0: Hauppauge Model 61344 D221 > bktr0: Detected a MSP3415D-A2 at 0x80 > bktr0: Hauppauge WinCast/TV, Philips FR1216 PAL FM tuner, msp3400c stereo, > remote control. > pci4: <multimedia> at device 1.1 (no driver attached) > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > atapci1: <Intel ICH9 SATA300 controller> port > 0xa000-0xa007,0x9c00-0x9c03,0x9880-0x9887,0x9800-0x9803,0x9480-0x948f,0x9400-0x940f > irq 22 at device 31.2 on pci0 > atapci1: [ITHREAD] > ata4: <ATA channel 0> on atapci1 > ata4: [ITHREAD] > ata5: <ATA channel 1> on atapci1 > ata5: [ITHREAD] > pci0: <serial bus, SMBus> at device 31.3 (no driver attached) > atapci2: <Intel ICH9 SATA300 controller> port > 0xb000-0xb007,0xac00-0xac03,0xa880-0xa887,0xa800-0xa803,0xa480-0xa48f,0xa400-0xa40f > irq 22 at device 31.5 on pci0 > atapci2: [ITHREAD] > ata6: <ATA channel 0> on atapci2 > ata6: [ITHREAD] > ata7: <ATA channel 1> on atapci2 > ata7: [ITHREAD] > acpi_button0: <Power Button> on acpi0 > fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on > acpi0 > fdc0: [FILTER] > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > sio0: configured irq 4 not in bitmap of probed irqs 0 > sio0: port may not be enabled > sio0: configured irq 4 not in bitmap of probed irqs 0 > sio0: port may not be enabled > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on > acpi0 > sio0: type 16550A > sio0: [FILTER] > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > atkbd0: [ITHREAD] > ppc0: cannot reserve I/O port range > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > ums0: <Logitech USB Gaming Mouse, class 0/0, rev 2.00/52.00, addr 2> on > uhub2 > ums0: 16 buttons and Z dir. > uhid0: <Logitech USB Gaming Mouse, class 0/0, rev 2.00/52.00, addr 2> on > uhub2 > umass0: <Apacer Embedded Reader, class 0/0, rev 1.10/1.00, addr 2> on uhub5 > Timecounters tick every 1.000 msec > hptrr: no controller detected. > ad8: 476940MB <Hitachi HDP725050GLA360 GM4OA52A> at ata4-master SATA300 > ad10: 238475MB <HDT722525DLA380 V44OA9BA> at ata5-master SATA150 > GEOM_LABEL: Label for provider ad10s3 is ntfs/System. > acd0: DVDR <HL-DT-ST DVDRAM GH20LS15/JL00> at ata6-master SATA150 > ad14: 953869MB <WDC WD10EACS-00D6B0 01.01A01> at ata7-master SATA300 > pcm0: <HDA Codec: Realtek ALC883> > pcm0: <HDA Driver Revision: 20071129_0050> > SMP: AP CPU #3 Launched! > SMP: AP CPU #1 Launched! > SMP: AP CPU #2 Launched! > da0 at umass-sim0 bus 0 target 0 lun 0 > da0: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device > da0: 1.000MB/s transfers > da0: Attempt to query device size failed: NOT READY, Medium not present > da1 at umass-sim0 bus 0 target 0 lun 1 > da1: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device > da1: 1.000MB/s transfers > da1: Attempt to query device size failed: NOT READY, Medium not present > da2 at umass-sim0 bus 0 target 0 lun 2 > da2: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device > da2: 1.000MB/s transfers > da2: Attempt to query device size failed: NOT READY, Medium not present > da3 at umass-sim0 bus 0 target 0 lun 3 > da3: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device > da3: 1.000MB/s transfers > da3: Attempt to query device size failed: NOT READY, Medium not present > Trying to mount root from ufs:/dev/ad8s1a > WARNING: / was not properly dismounted > WARNING: /tmp was not properly dismounted > WARNING: /usr was not properly dismounted > WARNING: /var was not properly dismounted > WARNING: /lager was not properly dismounted > link_elf_obj: symbol devfs_get_cdevpriv undefined > kldload: Unsupported file type > warning: KLD '/boot/kernel/drm.ko' is newer than the linker.hints file > link_elf_obj: symbol devfs_get_cdevpriv undefined > kldload: Unsupported file type > link_elf_obj: symbol devfs_get_cdevpriv undefined > kldload: Unsupported file type > link_elf_obj: symbol devfs_get_cdevpriv undefined > kldload: Unsupported file type > link_elf_obj: symbol devfs_get_cdevpriv undefined > kldload: Unsupported file type > link_elf_obj: symbol devfs_get_cdevpriv undefined > kldload: Unsupported file type > warning: KLD '/boot/kernel/drm.ko' is newer than the linker.hints file > link_elf_obj: symbol devfs_get_cdevpriv undefined > kldload: Unsupported file type > warning: KLD '/boot/kernel/drm.ko' is newer than the linker.hints file > link_elf_obj: symbol devfs_get_cdevpriv undefined > kldload: Unsupported file type > KLD radeon.ko: depends on drm - not available > kldload: Unsupported file type > warning: KLD '/boot/kernel/drm.ko' is newer than the linker.hints file > warning: KLD '/boot/kernel/drm.ko' is newer than the linker.hints file > link_elf_obj: symbol DRM_MEM_DRIVER undefined > kldload: Unsupported file type > link_elf_obj: symbol DRM_MEM_DRIVER undefined > kldload: Unsupported file type > link_elf_obj: symbol devfs_get_cdevpriv undefined > kldload: Unsupported file type > link_elf_obj: symbol devfs_get_cdevpriv undefined > kldload: Unsupported file type > Copyright (c) 1992-2008 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 7.1-RC2 #0: Tue Dec 23 11:42:13 UTC 2008 > root@driscoll.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel(R) Core(TM)2 Quad CPU Q6700 @ 2.66GHz (2666.78-MHz K8-class > CPU) > Origin = "GenuineIntel" Id = 0x6fb Stepping = 11 > > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM> > AMD Features=0x20100800<SYSCALL,NX,LM> > AMD Features2=0x1<LAHF> > Cores per package: 4 > usable memory = 4276789248 (4078 MB) > avail memory = 4115329024 (3924 MB) > ACPI APIC Table: <A_M_I_ OEMAPIC > > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 1 > cpu2 (AP): APIC ID: 2 > cpu3 (AP): APIC ID: 3 > ioapic0 <Version 2.0> irqs 0-23 on motherboard > kbd1 at kbdmux0 > ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) > acpi0: <A_M_I_ OEMXSDT> on motherboard > acpi0: [ITHREAD] > acpi0: Power Button (fixed) > acpi0: reservation of 0, a0000 (3) failed > acpi0: reservation of 100000, cff00000 (3) failed > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 > acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on > acpi0 > Timecounter "HPET" frequency 14318180 Hz quality 900 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 > pci1: <ACPI PCI bus> on pcib1 > vgapci0: <VGA-compatible display> port 0xc000-0xc0ff mem > 0xd0000000-0xdfffffff,0xfe9e0000-0xfe9effff irq 16 at device 0.0 on pci1 > vgapci1: <VGA-compatible display> mem 0xfe9f0000-0xfe9fffff at device 0.1 on > pci1 > uhci0: <UHCI (generic) USB controller> port 0xb800-0xb81f irq 16 at device > 26.0 on pci0 > uhci0: [GIANT-LOCKED] > uhci0: [ITHREAD] > usb0: <UHCI (generic) USB controller> on uhci0 > usb0: USB revision 1.0 > uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 > uhub0: 2 ports with 2 removable, self powered > uhci1: <UHCI (generic) USB controller> port 0xb880-0xb89f irq 21 at device > 26.1 on pci0 > uhci1: [GIANT-LOCKED] > uhci1: [ITHREAD] > usb1: <UHCI (generic) USB controller> on uhci1 > usb1: USB revision 1.0 > uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 > uhub1: 2 ports with 2 removable, self powered > uhci2: <UHCI (generic) USB controller> port 0xbc00-0xbc1f irq 18 at device > 26.2 on pci0 > uhci2: [GIANT-LOCKED] > uhci2: [ITHREAD] > usb2: <UHCI (generic) USB controller> on uhci2 > usb2: USB revision 1.0 > uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 > uhub2: 2 ports with 2 removable, self powered > ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe8ffc00-0xfe8fffff irq 18 > at device 26.7 on pci0 > ehci0: [GIANT-LOCKED] > ehci0: [ITHREAD] > usb3: EHCI version 1.0 > usb3: companion controllers, 2 ports each: usb0 usb1 usb2 > usb3: <EHCI (generic) USB 2.0 controller> on ehci0 > usb3: USB revision 2.0 > uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3 > uhub3: 6 ports with 6 removable, self powered > pci0: <multimedia> at device 27.0 (no driver attached) > pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 > pci3: <ACPI PCI bus> on pcib2 > pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0 > pci2: <ACPI PCI bus> on pcib3 > atapci0: <Marvell ATA controller> port > 0xdc00-0xdc07,0xd880-0xd883,0xd800-0xd807,0xd480-0xd483,0xd400-0xd40f mem > 0xfeaffc00-0xfeafffff irq 16 at device 0.0 on pci2 > atapci0: [ITHREAD] > ata2: <ATA channel 0> on atapci0 > ata2: [ITHREAD] > ata3: <ATA channel 1> on atapci0 > ata3: [ITHREAD] > uhci3: <UHCI (generic) USB controller> port 0xb080-0xb09f irq 23 at device > 29.0 on pci0 > uhci3: [GIANT-LOCKED] > uhci3: [ITHREAD] > usb4: <UHCI (generic) USB controller> on uhci3 > usb4: USB revision 1.0 > uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4 > uhub4: 2 ports with 2 removable, self powered > uhci4: <UHCI (generic) USB controller> port 0xb400-0xb41f irq 19 at device > 29.1 on pci0 > uhci4: [GIANT-LOCKED] > uhci4: [ITHREAD] > usb5: <UHCI (generic) USB controller> on uhci4 > usb5: USB revision 1.0 > uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5 > uhub5: 2 ports with 2 removable, self powered > uhci5: <UHCI (generic) USB controller> port 0xb480-0xb49f irq 18 at device > 29.2 on pci0 > uhci5: [GIANT-LOCKED] > uhci5: [ITHREAD] > usb6: <UHCI (generic) USB controller> on uhci5 > usb6: USB revision 1.0 > uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6 > uhub6: 2 ports with 2 removable, self powered > ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe8ff800-0xfe8ffbff irq 23 > at device 29.7 on pci0 > ehci1: [GIANT-LOCKED] > ehci1: [ITHREAD] > usb7: EHCI version 1.0 > usb7: companion controllers, 2 ports each: usb4 usb5 usb6 > usb7: <EHCI (generic) USB 2.0 controller> on ehci1 > usb7: USB revision 2.0 > uhub7: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb7 > uhub7: 6 ports with 6 removable, self powered > uhub7: port 6, set config at addr 2 failed > uhub7: device problem (INVAL), disabling port 6 > pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > pci4: <ACPI PCI bus> on pcib4 > xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xec00-0xec7f mem > 0xfebffc00-0xfebffc7f irq 16 at device 0.0 on pci4 > miibus0: <MII bus> on xl0 > xlphy0: <3Com internal media interface> PHY 24 on miibus0 > xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > xl0: Ethernet address: 00:10:5a:69:26:6b > xl0: [ITHREAD] > pci4: <multimedia, video> at device 1.0 (no driver attached) > pci4: <multimedia> at device 1.1 (no driver attached) > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > atapci1: <Intel ICH9 SATA300 controller> port > 0xa000-0xa007,0x9c00-0x9c03,0x9880-0x9887,0x9800-0x9803,0x9480-0x948f,0x9400-0x940f > irq 22 at device 31.2 on pci0 > atapci1: [ITHREAD] > ata4: <ATA channel 0> on atapci1 > ata4: [ITHREAD] > ata5: <ATA channel 1> on atapci1 > ata5: [ITHREAD] > pci0: <serial bus, SMBus> at device 31.3 (no driver attached) > atapci2: <Intel ICH9 SATA300 controller> port > 0xb000-0xb007,0xac00-0xac03,0xa880-0xa887,0xa800-0xa803,0xa480-0xa48f,0xa400-0xa40f > irq 22 at device 31.5 on pci0 > atapci2: [ITHREAD] > ata6: <ATA channel 0> on atapci2 > ata6: [ITHREAD] > ata7: <ATA channel 1> on atapci2 > ata7: [ITHREAD] > acpi_button0: <Power Button> on acpi0 > fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on > acpi0 > fdc0: [FILTER] > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > sio0: configured irq 4 not in bitmap of probed irqs 0 > sio0: port may not be enabled > sio0: configured irq 4 not in bitmap of probed irqs 0 > sio0: port may not be enabled > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on > acpi0 > sio0: type 16550A > sio0: [FILTER] > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > atkbd0: [ITHREAD] > cpu0: <ACPI CPU> on acpi0 > ACPI Warning (tbutils-0243): Incorrect checksum in table [OEMB] - 7F, > should be 76 [20070320] > est0: <Enhanced SpeedStep Frequency Control> on cpu0 > p4tcc0: <CPU Frequency Thermal Control> on cpu0 > cpu1: <ACPI CPU> on acpi0 > est1: <Enhanced SpeedStep Frequency Control> on cpu1 > p4tcc1: <CPU Frequency Thermal Control> on cpu1 > cpu2: <ACPI CPU> on acpi0 > est2: <Enhanced SpeedStep Frequency Control> on cpu2 > p4tcc2: <CPU Frequency Thermal Control> on cpu2 > cpu3: <ACPI CPU> on acpi0 > est3: <Enhanced SpeedStep Frequency Control> on cpu3 > p4tcc3: <CPU Frequency Thermal Control> on cpu3 > ppc0: cannot reserve I/O port range > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > ums0: <Logitech USB Gaming Mouse, class 0/0, rev 2.00/52.00, addr 2> on > uhub2 > ums0: 16 buttons and Z dir. > uhid0: <Logitech USB Gaming Mouse, class 0/0, rev 2.00/52.00, addr 2> on > uhub2 > umass0: <Apacer Embedded Reader, class 0/0, rev 1.10/1.00, addr 2> on uhub5 > Timecounters tick every 1.000 msec > md0: Preloaded image </boot/mfsroot> 4194304 bytes at 0xffffffff80c6fd98 > ad8: 476940MB <Hitachi HDP725050GLA360 GM4OA52A> at ata4-master SATA300 > ad10: 238475MB <HDT722525DLA380 V44OA9BA> at ata5-master SATA150 > GEOM_LABEL: Label for provider ad10s3 is ntfs/System. > acd0: DVDR <HL-DT-ST DVDRAM GH20LS15/JL00> at ata6-master SATA150 > ad14: 953869MB <WDC WD10EACS-00D6B0 01.01A01> at ata7-master SATA300 > SMP: AP CPU #1 Launched! > SMP: AP CPU #3 Launched! > SMP: AP CPU #2 Launched! > GEOM_LABEL: Label for provider acd0 is iso9660/FreeBSD_Install. > da0 at umass-sim0 bus 0 target 0 lun 0 > da0: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device > da0: 1.000MB/s transfers > da0: Attempt to query device size failed: NOT READY, Medium not present > da1 at umass-sim0 bus 0 target 0 lun 1 > da1: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device > da1: 1.000MB/s transfers > da1: Attempt to query device size failed: NOT READY, Medium not present > da2 at umass-sim0 bus 0 target 0 lun 2 > da2: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device > da2: 1.000MB/s transfers > da2: Attempt to query device size failed: NOT READY, Medium not present > da3 at umass-sim0 bus 0 target 0 lun 3 > da3: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device > da3: 1.000MB/s transfers > da3: Attempt to query device size failed: NOT READY, Medium not present > Trying to mount root from ufs:/dev/md0 > Waiting (max 60 seconds) for system process `vnlru' to stop...done > Waiting (max 60 seconds) for system process `bufdaemon' to stop...done > Waiting (max > S6y0n csiencgo nddiss)k sf,o rv nsoydsetse mr epmraoicneisnsg .`.s.ynce9r ' > to stop...9 4 0 0 0 done > All buffers synced. > Copyright (c) 1992-2008 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 7.1-RC2 #0: Tue Dec 23 11:42:13 UTC 2008 > root@driscoll.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel(R) Core(TM)2 Quad CPU Q6700 @ 2.66GHz (2666.77-MHz K8-class > CPU) > Origin = "GenuineIntel" Id = 0x6fb Stepping = 11 > > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM> > AMD Features=0x20100800<SYSCALL,NX,LM> > AMD Features2=0x1<LAHF> > Cores per package: 4 > usable memory = 4280983552 (4082 MB) > avail memory = 4119531520 (3928 MB) > ACPI APIC Table: <A_M_I_ OEMAPIC > > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 1 > cpu2 (AP): APIC ID: 2 > cpu3 (AP): APIC ID: 3 > ioapic0 <Version 2.0> irqs 0-23 on motherboard > kbd1 at kbdmux0 > ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) > acpi0: <A_M_I_ OEMXSDT> on motherboard > acpi0: [ITHREAD] > acpi0: Power Button (fixed) > acpi0: reservation of 0, a0000 (3) failed > acpi0: reservation of 100000, cff00000 (3) failed > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 > acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on > acpi0 > Timecounter "HPET" frequency 14318180 Hz quality 900 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 > pci1: <ACPI PCI bus> on pcib1 > vgapci0: <VGA-compatible display> port 0xc000-0xc0ff mem > 0xd0000000-0xdfffffff,0xfe9e0000-0xfe9effff irq 16 at device 0.0 on pci1 > vgapci1: <VGA-compatible display> mem 0xfe9f0000-0xfe9fffff at device 0.1 on > pci1 > uhci0: <UHCI (generic) USB controller> port 0xb800-0xb81f irq 16 at device > 26.0 on pci0 > uhci0: [GIANT-LOCKED] > uhci0: [ITHREAD] > usb0: <UHCI (generic) USB controller> on uhci0 > usb0: USB revision 1.0 > uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 > uhub0: 2 ports with 2 removable, self powered > uhci1: <UHCI (generic) USB controller> port 0xb880-0xb89f irq 21 at device > 26.1 on pci0 > uhci1: [GIANT-LOCKED] > uhci1: [ITHREAD] > usb1: <UHCI (generic) USB controller> on uhci1 > usb1: USB revision 1.0 > uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 > uhub1: 2 ports with 2 removable, self powered > uhci2: <UHCI (generic) USB controller> port 0xbc00-0xbc1f irq 18 at device > 26.2 on pci0 > uhci2: [GIANT-LOCKED] > uhci2: [ITHREAD] > usb2: <UHCI (generic) USB controller> on uhci2 > usb2: USB revision 1.0 > uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 > uhub2: 2 ports with 2 removable, self powered > ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe8ffc00-0xfe8fffff irq 18 > at device 26.7 on pci0 > ehci0: [GIANT-LOCKED] > ehci0: [ITHREAD] > usb3: EHCI version 1.0 > usb3: companion controllers, 2 ports each: usb0 usb1 usb2 > usb3: <EHCI (generic) USB 2.0 controller> on ehci0 > usb3: USB revision 2.0 > uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3 > uhub3: 6 ports with 6 removable, self powered > pci0: <multimedia> at device 27.0 (no driver attached) > pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 > pci3: <ACPI PCI bus> on pcib2 > pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0 > pci2: <ACPI PCI bus> on pcib3 > atapci0: <Marvell ATA controller> port > 0xdc00-0xdc07,0xd880-0xd883,0xd800-0xd807,0xd480-0xd483,0xd400-0xd40f mem > 0xfeaffc00-0xfeafffff irq 16 at device 0.0 on pci2 > atapci0: [ITHREAD] > ata2: <ATA channel 0> on atapci0 > ata2: [ITHREAD] > ata3: <ATA channel 1> on atapci0 > ata3: [ITHREAD] > uhci3: <UHCI (generic) USB controller> port 0xb080-0xb09f irq 23 at device > 29.0 on pci0 > uhci3: [GIANT-LOCKED] > uhci3: [ITHREAD] > usb4: <UHCI (generic) USB controller> on uhci3 > usb4: USB revision 1.0 > uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4 > uhub4: 2 ports with 2 removable, self powered > uhci4: <UHCI (generic) USB controller> port 0xb400-0xb41f irq 19 at device > 29.1 on pci0 > uhci4: [GIANT-LOCKED] > uhci4: [ITHREAD] > usb5: <UHCI (generic) USB controller> on uhci4 > usb5: USB revision 1.0 > uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5 > uhub5: 2 ports with 2 removable, self powered > uhci5: <UHCI (generic) USB controller> port 0xb480-0xb49f irq 18 at device > 29.2 on pci0 > uhci5: [GIANT-LOCKED] > uhci5: [ITHREAD] > usb6: <UHCI (generic) USB controller> on uhci5 > usb6: USB revision 1.0 > uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6 > uhub6: 2 ports with 2 removable, self powered > ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe8ff800-0xfe8ffbff irq 23 > at device 29.7 on pci0 > ehci1: [GIANT-LOCKED] > ehci1: [ITHREAD] > usb7: EHCI version 1.0 > usb7: companion controllers, 2 ports each: usb4 usb5 usb6 > usb7: <EHCI (generic) USB 2.0 controller> on ehci1 > usb7: USB revision 2.0 > uhub7: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb7 > uhub7: 6 ports with 6 removable, self powered > uhub7: port 6, set config at addr 2 failed > uhub7: device problem (INVAL), disabling port 6 > pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > pci4: <ACPI PCI bus> on pcib4 > xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xec00-0xec7f mem > 0xfebffc00-0xfebffc7f irq 16 at device 0.0 on pci4 > miibus0: <MII bus> on xl0 > xlphy0: <3Com internal media interface> PHY 24 on miibus0 > xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > xl0: Ethernet address: 00:10:5a:69:26:6b > xl0: [ITHREAD] > pci4: <multimedia, video> at device 1.0 (no driver attached) > pci4: <multimedia> at device 1.1 (no driver attached) > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > atapci1: <Intel ICH9 SATA300 controller> port > 0xa000-0xa007,0x9c00-0x9c03,0x9880-0x9887,0x9800-0x9803,0x9480-0x948f,0x9400-0x940f > irq 22 at device 31.2 on pci0 > atapci1: [ITHREAD] > ata4: <ATA channel 0> on atapci1 > ata4: [ITHREAD] > ata5: <ATA channel 1> on atapci1 > ata5: [ITHREAD] > pci0: <serial bus, SMBus> at device 31.3 (no driver attached) > atapci2: <Intel ICH9 SATA300 controller> port > 0xb000-0xb007,0xac00-0xac03,0xa880-0xa887,0xa800-0xa803,0xa480-0xa48f,0xa400-0xa40f > irq 22 at device 31.5 on pci0 > atapci2: [ITHREAD] > ata6: <ATA channel 0> on atapci2 > ata6: [ITHREAD] > ata7: <ATA channel 1> on atapci2 > ata7: [ITHREAD] > acpi_button0: <Power Button> on acpi0 > fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on > acpi0 > fdc0: [FILTER] > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > sio0: configured irq 4 not in bitmap of probed irqs 0 > sio0: port may not be enabled > sio0: configured irq 4 not in bitmap of probed irqs 0 > sio0: port may not be enabled > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on > acpi0 > sio0: type 16550A > sio0: [FILTER] > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > atkbd0: [ITHREAD] > cpu0: <ACPI CPU> on acpi0 > ACPI Warning (tbutils-0243): Incorrect checksum in table [OEMB] - 7F, > should be 76 [20070320] > est0: <Enhanced SpeedStep Frequency Control> on cpu0 > p4tcc0: <CPU Frequency Thermal Control> on cpu0 > cpu1: <ACPI CPU> on acpi0 > est1: <Enhanced SpeedStep Frequency Control> on cpu1 > p4tcc1: <CPU Frequency Thermal Control> on cpu1 > cpu2: <ACPI CPU> on acpi0 > est2: <Enhanced SpeedStep Frequency Control> on cpu2 > p4tcc2: <CPU Frequency Thermal Control> on cpu2 > cpu3: <ACPI CPU> on acpi0 > est3: <Enhanced SpeedStep Frequency Control> on cpu3 > p4tcc3: <CPU Frequency Thermal Control> on cpu3 > ppc0: cannot reserve I/O port range > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > ums0: <Logitech USB Gaming Mouse, class 0/0, rev 2.00/52.00, addr 2> on > uhub2 > ums0: 16 buttons and Z dir. > uhid0: <Logitech USB Gaming Mouse, class 0/0, rev 2.00/52.00, addr 2> on > uhub2 > umass0: <Apacer Embedded Reader, class 0/0, rev 1.10/1.00, addr 2> on uhub5 > Timecounters tick every 1.000 msec > ad8: 476940MB <Hitachi HDP725050GLA360 GM4OA52A> at ata4-master SATA300 > ad10: 238475MB <HDT722525DLA380 V44OA9BA> at ata5-master SATA150 > GEOM_LABEL: Label for provider ad10s3 is ntfs/System. > acd0: DVDR <HL-DT-ST DVDRAM GH20LS15/JL00> at ata6-master SATA150 > ad14: 953869MB <WDC WD10EACS-00D6B0 01.01A01> at ata7-master SATA300 > SMP: AP CPU #1 Launched! > SMP: AP CPU #3 Launched! > SMP: AP CPU #2 Launched! > da0 at umass-sim0 bus 0 target 0 lun 0 > da0: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device > da0: 1.000MB/s transfers > da0: Attempt to query device size failed: NOT READY, Medium not present > da1 at umass-sim0 bus 0 target 0 lun 1 > da1: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device > da1: 1.000MB/s transfers > da1: Attempt to query device size failed: NOT READY, Medium not present > da2 at umass-sim0 bus 0 target 0 lun 2 > da2: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device > da2: 1.000MB/s transfers > da2: Attempt to query device size failed: NOT READY, Medium not present > da3 at umass-sim0 bus 0 target 0 lun 3 > da3: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device > da3: 1.000MB/s transfers > da3: Attempt to query device size failed: NOT READY, Medium not present > GEOM_LABEL: Label for provider acd0 is iso9660/FreeBSD_Install. > Trying to mount root from ufs:/dev/ad8s1a > Copyright (c) 1992-2008 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 7.1-RC2 #0: Tue Dec 23 11:42:13 UTC 2008 > root@driscoll.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel(R) Core(TM)2 Quad CPU Q6700 @ 2.66GHz (2666.78-MHz K8-class > CPU) > Origin = "GenuineIntel" Id = 0x6fb Stepping = 11 > > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM> > AMD Features=0x20100800<SYSCALL,NX,LM> > AMD Features2=0x1<LAHF> > Cores per package: 4 > usable memory = 4280983552 (4082 MB) > avail memory = 4119531520 (3928 MB) > ACPI APIC Table: <A_M_I_ OEMAPIC > > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 1 > cpu2 (AP): APIC ID: 2 > cpu3 (AP): APIC ID: 3 > ioapic0 <Version 2.0> irqs 0-23 on motherboard > kbd1 at kbdmux0 > ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) > acpi0: <A_M_I_ OEMXSDT> on motherboard > acpi0: [ITHREAD] > acpi0: Power Button (fixed) > acpi0: reservation of 0, a0000 (3) failed > acpi0: reservation of 100000, cff00000 (3) failed > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 > acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on > acpi0 > Timecounter "HPET" frequency 14318180 Hz quality 900 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 > pci1: <ACPI PCI bus> on pcib1 > vgapci0: <VGA-compatible display> port 0xc000-0xc0ff mem > 0xd0000000-0xdfffffff,0xfe9e0000-0xfe9effff irq 16 at device 0.0 on pci1 > vgapci1: <VGA-compatible display> mem 0xfe9f0000-0xfe9fffff at device 0.1 on > pci1 > uhci0: <UHCI (generic) USB controller> port 0xb800-0xb81f irq 16 at device > 26.0 on pci0 > uhci0: [GIANT-LOCKED] > uhci0: [ITHREAD] > usb0: <UHCI (generic) USB controller> on uhci0 > usb0: USB revision 1.0 > uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 > uhub0: 2 ports with 2 removable, self powered > uhci1: <UHCI (generic) USB controller> port 0xb880-0xb89f irq 21 at device > 26.1 on pci0 > uhci1: [GIANT-LOCKED] > uhci1: [ITHREAD] > usb1: <UHCI (generic) USB controller> on uhci1 > usb1: USB revision 1.0 > uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 > uhub1: 2 ports with 2 removable, self powered > uhci2: <UHCI (generic) USB controller> port 0xbc00-0xbc1f irq 18 at device > 26.2 on pci0 > uhci2: [GIANT-LOCKED] > uhci2: [ITHREAD] > usb2: <UHCI (generic) USB controller> on uhci2 > usb2: USB revision 1.0 > uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 > uhub2: 2 ports with 2 removable, self powered > ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe8ffc00-0xfe8fffff irq 18 > at device 26.7 on pci0 > ehci0: [GIANT-LOCKED] > ehci0: [ITHREAD] > usb3: EHCI version 1.0 > usb3: companion controllers, 2 ports each: usb0 usb1 usb2 > usb3: <EHCI (generic) USB 2.0 controller> on ehci0 > usb3: USB revision 2.0 > uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3 > uhub3: 6 ports with 6 removable, self powered > umass0: <TOSHIBA TransMemory, class 0/0, rev 2.00/1.10, addr 2> on uhub3 > pci0: <multimedia> at device 27.0 (no driver attached) > pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 > pci3: <ACPI PCI bus> on pcib2 > pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0 > pci2: <ACPI PCI bus> on pcib3 > atapci0: <Marvell ATA controller> port > 0xdc00-0xdc07,0xd880-0xd883,0xd800-0xd807,0xd480-0xd483,0xd400-0xd40f mem > 0xfeaffc00-0xfeafffff irq 16 at device 0.0 on pci2 > atapci0: [ITHREAD] > ata2: <ATA channel 0> on atapci0 > ata2: [ITHREAD] > ata3: <ATA channel 1> on atapci0 > ata3: [ITHREAD] > uhci3: <UHCI (generic) USB controller> port 0xb080-0xb09f irq 23 at device > 29.0 on pci0 > uhci3: [GIANT-LOCKED] > uhci3: [ITHREAD] > usb4: <UHCI (generic) USB controller> on uhci3 > usb4: USB revision 1.0 > uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4 > uhub4: 2 ports with 2 removable, self powered > uhci4: <UHCI (generic) USB controller> port 0xb400-0xb41f irq 19 at device > 29.1 on pci0 > uhci4: [GIANT-LOCKED] > uhci4: [ITHREAD] > usb5: <UHCI (generic) USB controller> on uhci4 > usb5: USB revision 1.0 > uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5 > uhub5: 2 ports with 2 removable, self powered > uhci5: <UHCI (generic) USB controller> port 0xb480-0xb49f irq 18 at device > 29.2 on pci0 > uhci5: [GIANT-LOCKED] > uhci5: [ITHREAD] > usb6: <UHCI (generic) USB controller> on uhci5 > usb6: USB revision 1.0 > uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6 > uhub6: 2 ports with 2 removable, self powered > ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe8ff800-0xfe8ffbff irq 23 > at device 29.7 on pci0 > ehci1: [GIANT-LOCKED] > ehci1: [ITHREAD] > usb7: EHCI version 1.0 > usb7: companion controllers, 2 ports each: usb4 usb5 usb6 > usb7: <EHCI (generic) USB 2.0 controller> on ehci1 > usb7: USB revision 2.0 > uhub7: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb7 > uhub7: 6 ports with 6 removable, self powered > uhub7: port 6, set config at addr 2 failed > uhub7: device problem (INVAL), disabling port 6 > pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > pci4: <ACPI PCI bus> on pcib4 > xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xec00-0xec7f mem > 0xfebffc00-0xfebffc7f irq 16 at device 0.0 on pci4 > miibus0: <MII bus> on xl0 > xlphy0: <3Com internal media interface> PHY 24 on miibus0 > xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > xl0: Ethernet address: 00:10:5a:69:26:6b > xl0: [ITHREAD] > pci4: <multimedia, video> at device 1.0 (no driver attached) > pci4: <multimedia> at device 1.1 (no driver attached) > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > atapci1: <Intel ICH9 SATA300 controller> port > 0xa000-0xa007,0x9c00-0x9c03,0x9880-0x9887,0x9800-0x9803,0x9480-0x948f,0x9400-0x940f > irq 22 at device 31.2 on pci0 > atapci1: [ITHREAD] > ata4: <ATA channel 0> on atapci1 > ata4: [ITHREAD] > ata5: <ATA channel 1> on atapci1 > ata5: [ITHREAD] > pci0: <serial bus, SMBus> at device 31.3 (no driver attached) > atapci2: <Intel ICH9 SATA300 controller> port > 0xb000-0xb007,0xac00-0xac03,0xa880-0xa887,0xa800-0xa803,0xa480-0xa48f,0xa400-0xa40f > irq 22 at device 31.5 on pci0 > atapci2: [ITHREAD] > ata6: <ATA channel 0> on atapci2 > ata6: [ITHREAD] > ata7: <ATA channel 1> on atapci2 > ata7: [ITHREAD] > acpi_button0: <Power Button> on acpi0 > fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on > acpi0 > fdc0: [FILTER] > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > sio0: configured irq 4 not in bitmap of probed irqs 0 > sio0: port may not be enabled > sio0: configured irq 4 not in bitmap of probed irqs 0 > sio0: port may not be enabled > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on > acpi0 > sio0: type 16550A > sio0: [FILTER] > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > atkbd0: [ITHREAD] > cpu0: <ACPI CPU> on acpi0 > ACPI Warning (tbutils-0243): Incorrect checksum in table [OEMB] - 7F, > should be 76 [20070320] > est0: <Enhanced SpeedStep Frequency Control> on cpu0 > p4tcc0: <CPU Frequency Thermal Control> on cpu0 > cpu1: <ACPI CPU> on acpi0 > est1: <Enhanced SpeedStep Frequency Control> on cpu1 > p4tcc1: <CPU Frequency Thermal Control> on cpu1 > cpu2: <ACPI CPU> on acpi0 > est2: <Enhanced SpeedStep Frequency Control> on cpu2 > p4tcc2: <CPU Frequency Thermal Control> on cpu2 > cpu3: <ACPI CPU> on acpi0 > est3: <Enhanced SpeedStep Frequency Control> on cpu3 > p4tcc3: <CPU Frequency Thermal Control> on cpu3 > ppc0: cannot reserve I/O port range > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > ums0: <Logitech USB Gaming Mouse, class 0/0, rev 2.00/52.00, addr 2> on > uhub2 > ums0: 16 buttons and Z dir. > uhid0: <Logitech USB Gaming Mouse, class 0/0, rev 2.00/52.00, addr 2> on > uhub2 > umass1: <Apacer Embedded Reader, class 0/0, rev 1.10/1.00, addr 2> on uhub5 > Timecounters tick every 1.000 msec > ad8: 476940MB <Hitachi HDP725050GLA360 GM4OA52A> at ata4-master SATA300 > ad10: 238475MB <HDT722525DLA380 V44OA9BA> at ata5-master SATA150 > GEOM_LABEL: Label for provider ad10s3 is ntfs/System. > acd0: DVDR <HL-DT-ST DVDRAM GH20LS15/JL00> at ata6-master SATA150 > ad14: 953869MB <WDC WD10EACS-00D6B0 01.01A01> at ata7-master SATA300 > GEOM_LABEL: Label for provider acd0 is iso9660/FreeBSD_Install. > SMP: AP CPU #3 Launched! > SMP: AP CPU #2 Launched! > SMP: AP CPU #1 Launched! > da0 at umass-sim0 bus 0 target 0 lun 0 > da0: <TOSHIBA TransMemory 5.00> Removable Direct Access SCSI-0 device > da0: 40.000MB/s transfers > da0: 3823MB (7830528 512 byte sectors: 255H 63S/T 487C) > da1 at umass-sim1 bus 1 target 0 lun 0 > da1: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device > da1: 1.000MB/s transfers > da1: Attempt to query device size failed: NOT READY, Medium not present > da2 at umass-sim1 bus 1 target 0 lun 1 > da2: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device > da2: 1.000MB/s transfers > da2: Attempt to query device size failed: NOT READY, Medium not present > da3 at umass-sim1 bus 1 target 0 lun 2 > da3: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device > da3: 1.000MB/s transfers > da3: Attempt to query device size failed: NOT READY, Medium not present > da4 at umass-sim1 bus 1 target 0 lun 3 > da4: <Apacer Embedded Reader 3.02> Removable Direct Access SCSI-0 device > da4: 1.000MB/s transfers > da4: Attempt to query device size failed: NOT READY, Medium not present > GEOM_LABEL: Label for provider da0s1 is msdosfs/4GB. > Trying to mount root from ufs:/dev/ad8s1a > WARNING: / was not properly dismounted > WARNING: /tmp was not properly dismounted > /tmp: mount pending error: blocks 0 files 1 > WARNING: /usr was not properly dismounted > WARNING: /var was not properly dismounted > /var: mount pending error: blocks 4 files 2 > GEOM_LABEL: Label msdosfs/4GB removed. > >>How-To-Repeat: > Install everyting (+X) from dvd -> startx -> logout -> startx > >>Fix: > > >>Release-Note: >>Audit-Trail: >>Unformatted: > _______________________________________________ > freebsd-bugs@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-bugs > To unsubscribe, send any mail to "freebsd-bugs-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200901021620.n02GK3Po076163>