Date: Sat, 21 Dec 1996 17:48:38 -0800 From: Ulf Zimmermann <ulf@Lamb.net> To: "Julian H. Stacey" <jhs@freebsd.org>, hardware@freebsd.org Subject: Re: e-mail forwarding Message-ID: <3.0.32.19961221174812.00724a18@Gatekeeper-3.Lamb.net>
next in thread | raw e-mail | index | archive | help
Hmmm, from the gif you attach also to the email, I would say it is a 486VLB
board, not a PCI. The 486VLB with PCchips sticker were sold often in
Germany. Try WeCo (Weit Computer) in Luebeck, they sold a larger number of
them as far I know. Ask for Swen Eisenkraemer and tell him you come from
me. He should have still a handbook for it.
Ulf.
At 02:10 PM 12/20/96 +0100, Julian H. Stacey wrote:
>I would much appreciate anyone who could shed light on
>jumper settings etc, for a motherboard & combi card
>that I was given without any docs:
>
>MOTHERBOARD :
> Width: 22cm (8.65"),
> Length: 25cm (9.8"),
> Front of board: "V1.0" in big white letters by keyboard socket
> + white label Assembled in China
> Back of board: "OA 405-1.0 E2h6"
> Bus: 4 * ISA, 3 * PCI,
> Memory: 8 Mem Slots,
> Bank 0: 4 * { SIM with 2 * N41-C + 1 * Siemens HYB511000BJ-70 }
> Bank 1: 4 * { SIM with 2 * ? + 1 * OKI }
> Cache: 8 * ALLIANCE AS7C256-20PC 9423 USA C, + 1 * UM61256AK-15 94230 R32382
> BIOS: AMI Chip American Megatrends 486DX ISA BIOS AB6128305
> On boot annonces as C. 1993 (so I presume no > 528M BIOS support
> CPU: 486 66MHz (+ Fan on bronze coloured aluminium),
>
> Layout diagram: As per Mime diagram attached, &
> duplicated on http://www.freebsd.org/~jhs/hardware/unknown.html
>
> Jumper settings as received are:
>
> JP 1: 0 X-X 0
> JP 2: 0 X-X
> JP 3: X-X 0 Soldered, No pins
> JP 4: Closed
> JP 5: Closed
> JP 6: Closed
> JP 7: Closed
> JP 8: Closed
> JP 9: 0 X-X
> JP 10: 0 X-X
> JP 11: Closed
> JP 12: Closed
> JP 13: Open
> JP 14: Closed
> JP 15: Open
> JP 16: POW LED /KEY LOCK Box wiring: Green Open White Blue White
> JP 17: SPEAKER Box wiring: Red Open Open Black
> JP 18: TB LED Box wiring: Yellow White
> JP 19: RESET Box wiring: White Blue
> JP 20: TB SW Box wiring: Unused (Yelllow White Black Cable floating free)
> JP 21: Open
> JP 22: X-X X-X ie 1 & 2 connected, & 3 & 4 connected
> JP 23: X-X 0
> JP 24: 0 X-X Soldered, No pins
> JP 25: X-X 0 Soldered, No pins
> JP 26: Closed
>
>
>COMBI CARD:
> 2 Serial, 1 parallel, 1 games port, + floppy + ide hard disc interfaces
> Bus physically appears as: PCI Bus
> Screen Print: UN 1081 VL FCC ID: J8Y2278VL Assy Rev A
> Card Layout:
> +----------------------------------------------------------------------+
> | +--+ +-----+ +-----+ +----------+ +----------+ +-----------+ +-- |
> | |J1| |J2 40| |J3 34| |Game 16/15| X-X |Ser 1 10/9| |Ser 2 10/25| | |
> | | | +-----+ +-----+ +----------+ W26 +----------+ +-----------+ | |
> | +--+ | |
> | DTC +-----+ Winbond WINBOND | |
> | +----+ | W 6 | | |
> | | W1 | | | | |
> | | | | | | |
> | | | | | +------+ +-----------+ | |
> | | W5 | | W17 | |24 MHz| | W18 - W25 | | |
> | +----+ +-----+ +------+ +-----------+ |
> +----------------------------------------------------------------------+
>
> White sticker on back:
> 3 (marked on 12 boxes, one per month)
> Warranty void if removed 1994
> QC Passed: 1st of 2 boxes marked. Made in China
>
> Parallel port #1 (on board) has
> 8 * { 33 ohm resistors & ceramic capacitors marked 222}
> 3 chips:
> Big: Winbond W83758P 351AB13365780 68 pin
> Small: Winbond W83757F 343TA13353880 100 pin
> Small: DTC 805 B R 9349 900061-01 100 pin
>
> 1 2 3
> W 1 X-X .
> W 2 . X-X
> W 3 . X-X
> W 4 . X-X
> W 5 X-X .
> ----------------
> W 6 X-X .
> W 7 . X-X
> W 8 . X-X
> W 9 X-X .
> W10 X-X .
> W11 X-X .
> W12 . X-X
> W13 X-X .
> W14 . X-X
> W15 . X-X
> W16 X-X .
> W17 X-X .
> ----------------
> W18 X-X
> W19 . .
> W20 . .
> W21 X-X
> W22 . .
> W23 . .
> W24 X-X
> W25 . .
> ----------------
> W26 X-X
>
> Hard Disk Red --- J1
> Hard Disk White --- H (hole through rest of word, presume high)
> Open Circuit --- Active
> Open Circuit ---
>
>
>To make it easier for anyone with a non Mime mailer,
>Ive put the motherboard diagram up on the web:
> http://www.freebsd.org/~jhs/hardware/unknown.html
>
>Once again, any info gratefully received, Thanks :-)
>
>Julian
>--
>Julian H. Stacey jhs@freebsd.org http://www.freebsd.org/~jhs/
>
>
>
>Attachment Converted: "c:\eudora\attach\Re e-mail forwarding.gif"
>
-----------------------------------------------------------
Alameda Networks, Inc. | Ulf Zimmermann (ulf@Alameda.net)
1525 Pacific Avenue | Phone: (510)769-2936
Alameda, CA 94501 | Fax : (510)521-5073
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3.0.32.19961221174812.00724a18>