Date: Wed, 20 May 1998 12:43:00 -0500 From: Danny Dulai <nirva@ishiboo.com> To: freebsd-multimedia@FreeBSD.ORG Subject: sound looping Message-ID: <19980520124300.47484@bleep.ishiboo.com> In-Reply-To: <19980519232608.51200@bleep.ishiboo.com>; from Danny Dulai on Tue, May 19, 1998 at 11:26:08PM -0500 References: <19980519232608.51200@bleep.ishiboo.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Quoting Danny Dulai (nirva@ishiboo.com): > > I am having a couple of problems. My sndstat, pnpinfo, and dmesg output > is at the end of this mesg. > > My sound card is a sound blaster awe64 gold pnp. I did a boot -c and > typed: > > pnp 1 0 os enable irq0 5 drq0 1 drq1 5 port0 0x220 port1 0x330 port2 0x388 > pnp 1 2 os enable port0 0x620 port1 0xa20 port2 0xe20 > > The relevent lines in my kernel config are > > controller pnp0 > controller snd0 > device sb0 at isa? port 0x220 irq 5 conflicts drq 1 vector sbintr > device sbxvi0 at isa? drq 5 > device sbmidi0 at isa? port 0x330 > device awe0 at isa? port 0x620 > device opl0 at isa? port 0x388 > > The -current dist is from mid April (oh yah, this is an SMP system too). > > My problem occurs when I cat a .au file to /dev/audio. If I let it go > all the way through, it plays just fine, and exits, and all is good. > however, if I hit ^C and break the cat, the sound card starts looping. > I saw a few posts about looping sound, was any solution discovered? If > I use Luigi's pcm driver, and hit ^C, the machine freezes solid. When > I play a mod file with s3mod and break it in the middle, I get similar > looping/crashing effects. any ideas on this? I have a very short .au that I can cat to /dev/audio after I hit ^C while playing another .au, and that makes it stop looping, but thats an annoying workaround. > Also, why can it not find an awe32? (isn't the 64 compatible with a 32?) this was fixed by doing os enable on the pnp 1 2 line.. thanks for the replies! > ------------------------------------------------------------------------------- > dmesg: > ------ > > Copyright (c) 1992-1998 FreeBSD Inc. > Copyright (c) 1982, 1986, 1989, 1991, 1993 > The Regents of the University of California. All rights reserved. > FreeBSD 3.0-CURRENT #13: Mon May 18 02:53:15 EDT 1998 > nirva@blookitty.ishiboo.com:/fs/src/freebsd-current/sys/compile/blookitty > Timecounter "i8254" frequency 1193182 Hz cost 3031 ns > CPU: Pentium Pro (686-class CPU) > Origin = "GenuineIntel" Id = 0x634 Stepping=4 > Features=0x80fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,MMX> > real memory = 134217728 (131072K bytes) > avail memory = 127418368 (124432K bytes) > FreeBSD/SMP: Multiprocessor motherboard > cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000 > cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000 > io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000 > Probing for devices on PCI bus 0: > chip0: <Host to PCI bridge (vendor=8086 device=7180)> rev 0x03 on pci0.0.0 > chip1: <PCI to PCI bridge (vendor=8086 device=7181)> rev 0x03 on pci0.1.0 > chip2: <Intel 82371AB PCI to ISA bridge> rev 0x01 on pci0.4.0 > ide_pci0: <Intel PIIX4 Bus-master IDE controller> rev 0x01 on pci0.4.1 > chip3: <Intel 82371AB USB host controller> rev 0x01 int d irq 9 on pci0.4.2 > chip4: <Intel 82371AB Power management controller> rev 0x01 on pci0.4.3 > ahc0: <Adaptec aic7880 Ultra SCSI host adapter> rev 0x00 int a irq 19 on pci0.6.0 > Illegal cable configuration!!. Only two connectors on the adapter may be used at a time!ahc0: aic7880 Wide Channel, SCSI Id=7, 16 SCBs > ahc0: waiting for scsi devices to settle > scbus0 at ahc0 bus 0 > ahc0:A:2: refuses WIDE negotiation. Using 8bit transfers > st0 at scbus0 target 2 lun 0 > st0: <ARCHIVE Python 28388-XXX 5.72> type 1 removable SCSI 2 > st0: Sequential-Access density code 0x13, drive empty > ahc0:A:4: refuses WIDE negotiation. Using 8bit transfers > sd0 at scbus0 target 4 lun 0 > sd0: <iomega jaz 1GB G.72> type 0 removable SCSI 2 > sd0: Direct-Access > sd0: ILLEGAL REQUEST asc:24,0 Invalid field in CDB > sd0 could not mode sense (4). Using ficticious geometry > 1021MB (2091050 512 byte sectors) > de0: <Digital 21140A Fast Ethernet> rev 0x20 int a irq 19 on pci0.9.0 > de0: 21140A [10-100Mb/s] pass 2.0 > de0: address 00:40:05:2d:97:09 > bktr0: <BrookTree 848> rev 0x12 int a irq 18 on pci0.10.0 > Hauppauge WinCast/TV, Philips NTSC tuner. > meteor0: <Philips SAA 7116> rev 0x00 int a irq 17 on pci0.11.0 > meteor0: <Philips SAA 7196> rev 0x1 > vga0: <Matrox MGA 2064W graphics accelerator> rev 0x01 int a irq 16 on pci0.12.0 > Probing for devices on PCI bus 1: > vga1: <Matrox model 051f graphics accelerator> rev 0x00 int a irq 16 on pci1.0.0 > Probing for PnP devices: > CSN 1 Vendor ID: CTL009e [0x9e008c0e] Serial 0x09fbdbd9 > Probing for devices on the ISA bus: > sc0 at 0x60-0x6f irq 1 on motherboard > sc0: VGA color <16 virtual consoles, flags=0x0> > sio0 at 0x3f8-0x3ff irq 4 on isa > sio0: type 16550A > sio1 at 0x2f8-0x2ff irq 3 on isa > sio1: type 16550A > lpt0 at 0x378-0x37f irq 7 on isa > lpt0: Interrupt-driven port > lp0: TCP/IP capable interface > psm0 at 0x60-0x64 irq 12 on motherboard > psm0: model Generic PS/2 mouse, device ID 0 > fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa > fdc0: FIFO enabled, 8 bytes threshold > fd0: 1.44MB 3.5in > wdc0 at 0x1f0-0x1f7 irq 14 on isa > wdc0: unit 0 (wd0): <WDC AC31600H> > wd0: 1549MB (3173184 sectors), 3148 cyls, 16 heads, 63 S/T, 512 B/S > wdc0: unit 1 (wd1): <Maxtor 84320D4> > wd1: 4120MB (8438850 sectors), 8930 cyls, 15 heads, 63 S/T, 512 B/S > wdc1 at 0x170-0x177 irq 15 on isa > wdc1: unit 0 (wd2): <WDC AC33100H> > wd2: 3020MB (6185088 sectors), 6136 cyls, 16 heads, 63 S/T, 512 B/S > wdc1: unit 1 (atapi): <TOSHIBA CD-ROM XM-6202B/1108>, removable, accel, ovlap, dma, iordis > wcd0: 5512Kb/sec, 256Kb cache, audio play, 255 volume levels, ejectable tray > wcd0: no disc inside, unlocked > sb0 at 0x220 irq 5 drq 1 on isa > snd0: <SoundBlaster 16 4.16> > sbxvi0 at ? drq 5 on isa > snd0: <SoundBlaster 16 4.16> > sbmidi0 at 0x330 on isa > snd0: <SoundBlaster MPU-401> > awe0 at 0x620 on isa > awe0: <SoundBlaster EMU8000 MIDI (RAM4096k)> > opl0 at 0x388 on isa > snd0: <Yamaha OPL3 FM> > npx0 on motherboard > npx0: INT 16 interface > APIC_IO: Testing 8254 interrupt delivery > APIC_IO: routing 8254 via pin 2 > SMP: AP CPU #1 Launched! > WARNING: / was not properly dismounted. > de0: autosense failed: cable problem? > PCM device 1 not installed. > > > ------------------------------------------------------------------------------- > /dev/sndstat: > ------------- > VoxWare Sound Driver:3.5-alpha15-970902 (Wed Aug 6 22:58:35 PDT 1997 Amancio Hasty@rah.star-gate.com) > Config options: > > Installed drivers: > Type 1: OPL-2/OPL-3 FM > Type 2: SoundBlaster > Type 6: SoundBlaster16 > Type 25: AWE32 Synth > Type 7: SB16 MIDI > > > Card config: > SoundBlaster at 0x220 irq 5 drq 1 > SoundBlaster16 at 0xffffffff irq 1 drq 5 > SB16 MIDI at 0x330 irq 1 > AWE32 Synth at 0x620 irq 1 > OPL-2/OPL-3 FM at 0x388 irq 1 > > Audio devices: > 0: SoundBlaster 16 4.16 > > Synth devices: > 0: Yamaha OPL-3 > > Midi devices: > 0: SoundBlaster 16 Midi > > Timers: > 0: System clock > > Mixers: > 0: SoundBlaster > > > ------------------------------------------------------------------------------- > pnpinfo: > -------- > > Checking for Plug-n-Play devices... > > Card assigned CSN #1 > Vendor ID CTL009e (0x9e008c0e), Serial Number 0x09fbdbd9 > PnP Version 1.0, Vendor Version 32 > Device Description: Creative SB AWE64 Gold > > Logical Device ID: CTL0044 0x44008c0e #0 > Device Description: Audio > TAG Start DF > Good Configuration > IRQ: 5 - only one type (true/edge) > DMA: channel(s) 1 > 8-bit, not a bus master, count by byte, , Compatibility mode > DMA: channel(s) 5 > 16-bit, not a bus master, , count by word, Compatibility mode > I/O Range 0x220 .. 0x220, alignment 0x1, len 0x10 > [16-bit addr] > I/O Range 0x330 .. 0x330, alignment 0x1, len 0x2 > [16-bit addr] > I/O Range 0x388 .. 0x388, alignment 0x1, len 0x4 > [16-bit addr] > TAG Start DF > Acceptable Configuration > IRQ: 5 7 9 10 - only one type (true/edge) > DMA: channel(s) 0 1 3 > 8-bit, not a bus master, count by byte, , Compatibility mode > DMA: channel(s) 5 6 7 > 16-bit, not a bus master, , count by word, Compatibility mode > I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10 > [16-bit addr] > I/O Range 0x300 .. 0x330, alignment 0x30, len 0x2 > [16-bit addr] > I/O Range 0x388 .. 0x388, alignment 0x1, len 0x4 > [16-bit addr] > TAG Start DF > Acceptable Configuration > IRQ: 5 7 9 10 - only one type (true/edge) > DMA: channel(s) 0 1 3 > 8-bit, not a bus master, count by byte, , Compatibility mode > DMA: channel(s) 5 6 7 > 16-bit, not a bus master, , count by word, Compatibility mode > I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10 > [16-bit addr] > I/O Range 0x300 .. 0x330, alignment 0x30, len 0x2 > [16-bit addr] > TAG Start DF > Acceptable Configuration > IRQ: 5 7 9 10 - only one type (true/edge) > DMA: channel(s) 0 1 3 > 8-bit, not a bus master, count by byte, , Compatibility mode > DMA: channel(s) 5 6 7 > 16-bit, not a bus master, , count by word, Compatibility mode > I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10 > [16-bit addr] > TAG Start DF > Acceptable Configuration > IRQ: 5 7 9 10 - only one type (true/edge) > DMA: channel(s) 0 1 3 > 8-bit, not a bus master, count by byte, , Compatibility mode > I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10 > [16-bit addr] > I/O Range 0x300 .. 0x330, alignment 0x30, len 0x2 > [16-bit addr] > I/O Range 0x388 .. 0x388, alignment 0x1, len 0x4 > [16-bit addr] > TAG Start DF > Acceptable Configuration > IRQ: 5 7 9 10 - only one type (true/edge) > DMA: channel(s) 0 1 3 > 8-bit, not a bus master, count by byte, , Compatibility mode > I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10 > [16-bit addr] > I/O Range 0x300 .. 0x330, alignment 0x30, len 0x2 > [16-bit addr] > TAG Start DF > Acceptable Configuration > IRQ: 5 7 9 10 - only one type (true/edge) > DMA: channel(s) 0 1 3 > 8-bit, not a bus master, count by byte, , Compatibility mode > I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10 > [16-bit addr] > TAG Start DF > Sub-optimal Configuration > IRQ: 5 7 9 10 - only one type (true/edge) > DMA: channel(s) 0 1 3 > 8-bit, not a bus master, count by byte, , Compatibility mode > DMA: channel(s) 5 6 7 > 16-bit, not a bus master, , count by word, Compatibility mode > I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10 > [16-bit addr] > I/O Range 0x300 .. 0x330, alignment 0x10, len 0x2 > [16-bit addr] > I/O Range 0x388 .. 0x394, alignment 0x4, len 0x4 > [16-bit addr] > TAG End DF > > Logical Device ID: CTL7002 0x02708c0e #1 > Compatible Device ID: PNPb02f (2fb0d041) > Device Description: Game > TAG Start DF > Good Configuration > I/O Range 0x200 .. 0x200, alignment 0x1, len 0x8 > [16-bit addr] > TAG Start DF > Acceptable Configuration > I/O Range 0x200 .. 0x208, alignment 0x8, len 0x8 > [16-bit addr] > TAG End DF > > Logical Device ID: CTL0023 0x23008c0e #2 > Device Description: WaveTable > TAG Start DF > Good Configuration > I/O Range 0x620 .. 0x620, alignment 0x1, len 0x4 > [16-bit addr] > TAG Start DF > Acceptable Configuration > I/O Range 0x620 .. 0x680, alignment 0x20, len 0x4 > [16-bit addr] > TAG End DF > End Tag > > Successfully got 67 resources, 3 logical fdevs > -- card select # 0x0001 > > CSN CTL009e (0x9e008c0e), Serial Number 0x09fbdbd9 > > Logical device #0 > IO: 0x0220 0x0330 0x0388 0x0000 0x0000 0x0000 0x0000 0x0000 > IRQ 5 0 > DMA 1 5 > IO range check 0x00 activate 0x01 > > Logical device #1 > IO: 0x0200 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 > IRQ 0 0 > DMA 4 4 > IO range check 0x00 activate 0x01 > > Logical device #2 > IO: 0x0620 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 > IRQ 0 0 > DMA 4 4 > IO range check 0x00 activate 0x01 -- ___________________________________________________________________________ Danny Dulai Feet. Pumice. Lotion. http://www.ishiboo.com/~nirva/ nirva@ishiboo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19980520124300.47484>