Date: Mon, 31 Mar 2003 19:37:55 -0600 From: Juli Mallett <jmallett@FreeBSD.org> To: freebsd-current@FreeBSD.org Cc: freebsd-scsi@FreeBSD.org Subject: Odd issues with USB SmartMedia Reader/Writer (PNY) Message-ID: <20030331193755.A60987@FreeBSD.org>
next in thread | raw e-mail | index | archive | help
I'm really dumb when it comes to CAM, SCSI, USB, and so on, so forgive if I am being naive... (Also that would probably explain why I am having a hard time deciding where this mail should end up... Forgive me on that account, plz.) I have a PNY USB SmartMedia reader which works excellently with 5.x with 8M media, but which blows up with 32M media. I'd assume this is due to improper geometry or something, but I really have no idea. Insert-reinsert produces no change in results, etc. Below are bits from dmesg, with the smaller then the larger. Any insight would be appreciated. Once this is taken care of, the weekly reboots into windows to clean off the camera can finally stop... Out last legitimate use of Windows :) %%% --> With the 8M SmartMedia umass0: Alcor Mass Storage Device, rev 1.10/1.00, addr 5 umass0: Get Max Lun not supported (STALLED) umass0:0:0:-1: Attached to scbus0 as device 0 pass0 at umass-sim0 bus 0 target 0 lun 0 pass0: <Generic USB SMC Reader 1.00> Removable Direct Access SCSI-0 device pass0: 1.000MB/s transfers GEOM: new disk da0 da0 at umass-sim0 bus 0 target 0 lun 0 da0: <Generic USB SMC Reader 1.00> Removable Direct Access SCSI-0 device da0: 1.000MB/s transfers da0: 7MB (16000 512 byte sectors: 64H 32S/T 7C) (da0:umass-sim0:0:0:0): READ(6)/WRITE(6) not supported, increasing minimum_cmd_size to 10. [0] f:80 typ:1 s(CHS):0/1/10 e(CHS):249/3/16 s:25 l:15975 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure da0s1, start 12800 length 8179200 end 8191999 %%% %%% --> With the 32M SmartMedia umass0: Alcor Mass Storage Device, rev 1.10/1.00, addr 5 umass0: Get Max Lun not supported (STALLED) umass0:0:0:-1: Attached to scbus0 as device 0 pass0 at umass-sim0 bus 0 target 0 lun 0 pass0: <Generic USB SMC Reader 1.00> Removable Direct Access SCSI-0 device pass0: 1.000MB/s transfers GEOM: new disk da0 (da0:umass-sim0:0:0:0): error 6 (da0:umass-sim0:0:0:0): Unretryable Error da0 at umass-sim0 bus 0 target 0 lun 0 da0: <Generic USB SMC Reader 1.00> Removable Direct Access SCSI-0 device da0: 1.000MB/s transfers da0: Attempt to query device size failed: NOT READY, Medium not present (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI Status: Check Condition (da0:umass-sim0:0:0:0): NOT READY asc:3a,0 (da0:umass-sim0:0:0:0): Medium not present (da0:umass-sim0:0:0:0): (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da0:umass-sim0:0:0:0): NOT READY asc:3a,0 (da0:umass-sim0:0:0:0): Medium not present Unretryable error (da0:umass-sim0:0:0:0): error 6 (da0:umass-sim0:0:0:0): Unretryable Error Opened disk da0 -> 6 (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI Status: Check Condition (da0:umass-sim0:0:0:0): NOT READY asc:3a,0 (da0:umass-sim0:0:0:0): Medium not present (da0:umass-sim0:0:0:0): (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da0:umass-sim0:0:0:0): NOT READY asc:3a,0 (da0:umass-sim0:0:0:0): Medium not present Unretryable error (da0:umass-sim0:0:0:0): error 6 (da0:umass-sim0:0:0:0): Unretryable Error Opened disk da0 -> 6 %%% Thanx! juli. -- juli mallett. email: jmallett@freebsd.org; aim: bsdflata; efnet: juli;
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030331193755.A60987>