Date: Wed, 31 Jan 2001 01:34:25 -0500 (EST) From: Cheffo Izroda <cheffo@post.com> To: freebsd-questions@FreeBSD.ORG Subject: Can I config my VIA VT86C100A and how if can? Message-ID: <384324567.980922865609.JavaMail.root@web572-mc>
next in thread | raw e-mail | index | archive | help
--384325618.980922865592.JavaMail.root@web572-mc
Content-Type: text/plain
Content-Transfer-Encoding: 7bit
Hello,
I have comiled my own kernel on FreeBSD-4.2-20010127-STABLR with :
device miibus
device vr
but when I reboot after make install there was an error in dmesg.boot :
vr0: MII with out any phy
device_probe_and_attach: vr0 attach returned 6
I have motherboard Intel BX slot1
and NIC VIA VT86C100A - Rhai I (pci) on isa slot wiht bridge
when i search for any manual about this error I check :
man devie_probe_and_attach
but there was only info about returned zero status (success)
can you tell me where is the problem and what exactly means
attach returned 6 !
I sent with this letter my dmesg.boot
-=< Cheffo >=-
______________________________________________
FREE Personalized Email at Mail.com
Sign up at http://www.mail.com/?sr=signup
--384325618.980922865592.JavaMail.root@web572-mc
Content-Type: text/plain; name=dmesg.boot
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment; filename=dmesg.boot
Content-Description:
Content-ID:
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.2-20010109-STABLE #11: Wed Jan 31 07:09:30 EET 2001
root@pc04.royal.com:/usr/src/sys/compile/CORE
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 567956623 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (567.96-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 66912256 (65344K bytes)
avail memory = 62631936 (61164K bytes)
Preloaded elf kernel "kernel" at 0xc0282000.
VESA: v3.0, 4096k memory, flags:0x1, mode table:0xc023a982 (1000022)
VESA: NVidia
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <NVidia Riva Vanta TNT2 graphics accelerator> at 0.0 irq 11
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xffa0-0xffaf at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 7.2 irq 10
chip1: <Intel 82371AB Power management controller> port 0x440-0x44f at device 7.3 on pci0
vr0: <VIA VT3043 Rhine I 10/100BaseTX> port 0xdc00-0xdc7f mem 0xefffff80-0xefffffff irq 9 at device 16.0 on pci0
vr0: Ethernet address: 00:c0:26:a1:09:12
vr0: MII without any phy!
device_probe_and_attach: vr0 attach returned 6
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ad0: 19470MB <Maxtor 32049H2> [39560/16/63] at ata0-master UDMA33
acd0: CD-RW <CD-W54E> at ata1-master using WDMA2
Mounting root from ufs:/dev/ad0s1a
--384325618.980922865592.JavaMail.root@web572-mc--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?384324567.980922865609.JavaMail.root>