Date: Mon, 12 Jan 2009 03:54:34 +0000 (UTC) From: Pyun YongHyeon <yongari@FreeBSD.org> To: src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-stable@freebsd.org, svn-src-stable-7@freebsd.org Subject: svn commit: r187081 - in stable/7/sys: . contrib/pf dev/ath/ath_hal dev/cxgb pci Message-ID: <200901120354.n0C3sYUS048251@svn.freebsd.org>
next in thread | raw e-mail | index | archive | help
Author: yongari Date: Mon Jan 12 03:54:33 2009 New Revision: 187081 URL: http://svn.freebsd.org/changeset/base/187081 Log: MFC r184241-184243: r184241: Don't rearm watchdog timer in rl_txeof(). The watchdog timer was already set in rl_start_locked(). Touching the watchdog timer in other places will hide the root cause of watchdog timeouts. r184282: Make rl_init_locked() call rl_reset. This will put hardware into sane state after resume/watchdog timeouts. r184283: After sending stop command to MAC, give hardware chance to drain active DMA operation. Modified: stable/7/sys/ (props changed) stable/7/sys/contrib/pf/ (props changed) stable/7/sys/dev/ath/ath_hal/ (props changed) stable/7/sys/dev/cxgb/ (props changed) stable/7/sys/pci/if_rl.c Modified: stable/7/sys/pci/if_rl.c ============================================================================== --- stable/7/sys/pci/if_rl.c Mon Jan 12 03:48:25 2009 (r187080) +++ stable/7/sys/pci/if_rl.c Mon Jan 12 03:54:33 2009 (r187081) @@ -1348,7 +1348,6 @@ rl_txeof(struct rl_softc *sc) CSR_WRITE_4(sc, RL_TXCFG, RL_TXCFG_CONFIG); oldthresh = sc->rl_txthresh; /* error recovery */ - rl_reset(sc); rl_init_locked(sc); /* restore original threshold */ sc->rl_txthresh = oldthresh; @@ -1360,8 +1359,6 @@ rl_txeof(struct rl_softc *sc) if (RL_LAST_TXMBUF(sc) == NULL) sc->rl_watchdog_timer = 0; - else if (sc->rl_watchdog_timer == 0) - sc->rl_watchdog_timer = 5; } static void @@ -1417,10 +1414,8 @@ rl_poll_locked(struct ifnet *ifp, enum p /* XXX We should check behaviour on receiver stalls. */ - if (status & RL_ISR_SYSTEM_ERR) { - rl_reset(sc); + if (status & RL_ISR_SYSTEM_ERR) rl_init_locked(sc); - } } } #endif /* DEVICE_POLLING */ @@ -1457,10 +1452,8 @@ rl_intr(void *arg) rl_rxeof(sc); if ((status & RL_ISR_TX_OK) || (status & RL_ISR_TX_ERR)) rl_txeof(sc); - if (status & RL_ISR_SYSTEM_ERR) { - rl_reset(sc); + if (status & RL_ISR_SYSTEM_ERR) rl_init_locked(sc); - } } if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd)) @@ -1623,6 +1616,8 @@ rl_init_locked(struct rl_softc *sc) */ rl_stop(sc); + rl_reset(sc); + /* * Init our MAC address. Even though the chipset * documentation doesn't mention it, we need to enter "Config @@ -1845,6 +1840,14 @@ rl_stop(struct rl_softc *sc) CSR_WRITE_1(sc, RL_COMMAND, 0x00); CSR_WRITE_2(sc, RL_IMR, 0x0000); + for (i = 0; i < RL_TIMEOUT; i++) { + DELAY(10); + if ((CSR_READ_1(sc, RL_COMMAND) & + (RL_CMD_RX_ENB | RL_CMD_TX_ENB)) == 0) + break; + } + if (i == RL_TIMEOUT) + device_printf(sc->rl_dev, "Unable to stop Tx/Rx MAC\n"); /* * Free the TX list buffers.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200901120354.n0C3sYUS048251>