Date: Thu, 7 Feb 2008 21:20:03 GMT From: =?ISO-8859-1?Q?Morten_Str=E5rup?= <morten@lightworkings.dk> To: freebsd-bugs@FreeBSD.org Subject: Re: kern/120296: [sata] Unstable SATA on MB with Nvidia MCP 570 SLI chipset. Message-ID: <200802072120.m17LK3bt007427@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR kern/120296; it has been noted by GNATS.
From: =?ISO-8859-1?Q?Morten_Str=E5rup?= <morten@lightworkings.dk>
To: bug-followup@FreeBSD.org, morten@lightworkings.dk
Cc:
Subject: Re: kern/120296: [sata] Unstable SATA on MB with Nvidia MCP 570 SLI
chipset.
Date: Thu, 07 Feb 2008 22:16:01 +0100
Here it is again. Hopefully this time with all the info needed. There is
a 250 GB seagate disk connected to the nforce sata controller.
nas# dmesg
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-PRERELEASE #1: Wed Feb 6 00:09:43 CET 2008
root@nas.lightworkings:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80bc8000.
Preloaded /boot/zfs/zpool.cache "/boot/zfs/zpool.cache" at
0xffffffff80bc81e8.
Calibrating clock(s) ... i8254 clock: 1193271 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2300017027 Hz
CPU: AMD Athlon(tm) X2 Dual Core Processor BE-2400 (2300.02-MHz K8-class
CPU)
Origin = "AuthenticAMD" Id = 0x60fb2 Stepping = 2
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x2001<SSE3,CX16>
AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x11f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch>
Cores per package: 2
L1 2MB data TLB: 8 entries, fully associative
L1 2MB instruction TLB: 8 entries, fully associative
L1 4KB data TLB: 32 entries, fully associative
L1 4KB instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way
associative
L2 2MB unified TLB: 0 entries, disabled/not present
L2 4KB data TLB: 512 entries, 4-way associative
L2 4KB instruction TLB: 512 entries, 4-way associative
L2 unified cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
usable memory = 4282007552 (4083 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009afff, 630784 bytes (154 pages)
0x0000000000cc6000 - 0x00000000c70f9fff, 3326296064 bytes (812084 pages)
0x0000000100000000 - 0x000000012ffeffff, 805240832 bytes (196592 pages)
avail memory = 4118200320 (3927 MB)
ACPI APIC Table: <MSIISM OEMAPIC >
INTR: Adding local APIC 1 as a target
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 2
ACPI: RSDP @ 0x0xf92b0/0x0014 (v 0 ACPIAM)
ACPI: RSDT @ 0x0xcffd0000/0x003C (v 1 MSIISM OEMRSDT 0x10000704 MSFT
0x00000097)
ACPI: FACP @ 0x0xcffd0200/0x0084 (v 2 MSIISM OEMFACP 0x10000704 MSFT
0x00000097)
ACPI: DSDT @ 0x0xcffd0440/0x5045 (v 1 1ADGH 1ADGH013 0x00000013 INTL
0x20051117)
ACPI: FACS @ 0x0xcffde000/0x0040
ACPI: APIC @ 0x0xcffd0390/0x0070 (v 1 MSIISM OEMAPIC 0x10000704 MSFT
0x00000097)
ACPI: MCFG @ 0x0xcffd0400/0x003C (v 1 MSIISM OEMMCFG 0x10000704 MSFT
0x00000097)
ACPI: OEMB @ 0x0xcffde040/0x0061 (v 1 MSIISM AMI_OEM 0x10000704 MSFT
0x00000097)
ACPI: HPET @ 0x0xcffd5490/0x0038 (v 1 MSIISM OEMHPET0 0x10000704 MSFT
0x00000097)
ACPI: SSDT @ 0x0xcffd54d0/0x0248 (v 1 A M I POWERNOW 0x00000001 AMD
0x00000001)
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
MADT: Interrupt override: source 14, irq 14
MADT: Interrupt override: source 15, irq 15
ioapic0 <Version 1.1> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x0001000f pcm: 0x00010000
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
wlan_amrr: <AMRR Transmit Rate Control Algorithm>
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
io: <I/O>
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
hptrr: HPT RocketRAID controller driver v1.1 (Feb 6 2008 00:09:35)
acpi0: <MSIISM OEMRSDT> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
AcpiOsDerivePciId: \\_SB_.PCI0.SBRG.PIMC -> bus 0 dev 1 func 0
acpi0: reservation of fec00000, 1000 (3) failed
acpi0: reservation of fee00000, 1000 (3) failed
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, cff00000 (3) failed
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x2008-0x200b on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 16 17 18 19
Validation 0 255 N 0 16 17 18 19
After Disable 0 255 N 0 16 17 18 19
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 16 17 18 19
Validation 0 255 N 0 16 17 18 19
After Disable 0 255 N 0 16 17 18 19
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 16 17 18 19
Validation 0 255 N 0 16 17 18 19
After Disable 0 255 N 0 16 17 18 19
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 16 17 18 19
Validation 0 255 N 0 16 17 18 19
After Disable 0 255 N 0 16 17 18 19
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 16 17 18 19
Validation 0 255 N 0 16 17 18 19
After Disable 0 255 N 0 16 17 18 19
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 16 17 18 19
Validation 0 255 N 0 16 17 18 19
After Disable 0 255 N 0 16 17 18 19
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 16 17 18 19
Validation 0 255 N 0 16 17 18 19
After Disable 0 255 N 0 16 17 18 19
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 16 17 18 19
Validation 0 255 N 0 16 17 18 19
After Disable 0 255 N 0 16 17 18 19
pci_link8: Index IRQ Rtd Ref IRQs
Initial Probe 0 7 N 0 21 22 23
Validation 0 255 N 0 21 22 23
After Disable 0 255 N 0 21 22 23
pci_link9: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 20
Validation 0 255 N 0 20
After Disable 0 255 N 0 20
pci_link10: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 21 22 23
Validation 0 255 N 0 21 22 23
After Disable 0 255 N 0 21 22 23
pci_link11: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 20
Validation 0 255 N 0 20
After Disable 0 255 N 0 20
pci_link12: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 21 22 23
Validation 0 255 N 0 21 22 23
After Disable 0 255 N 0 21 22 23
pci_link13: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 21 22 23
Validation 0 255 N 0 21 22 23
After Disable 0 255 N 0 21 22 23
pci_link14: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 21 22 23
Validation 0 255 N 0 21 22 23
After Disable 0 255 N 0 21 22 23
pci_link15: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 21 22 23
Validation 0 255 N 0 21 22 23
After Disable 0 255 N 0 21 22 23
pci_link16: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 21 22 23
Validation 0 255 N 0 21 22 23
After Disable 0 255 N 0 21 22 23
pci_link17: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 21 22 23
Validation 0 255 N 0 21 22 23
After Disable 0 255 N 0 21 22 23
pci_link18: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 21 22 23
Validation 0 255 N 0 21 22 23
After Disable 0 255 N 0 21 22 23
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
acpi0
acpi_hpet0: vend: 0x10de rev: 0x1 num: 2 hz: 25000000 opts: legacy_route
Timecounter "HPET" frequency 25000000 Hz quality 900
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
powernow0: <PowerNow! K8> on cpu0
cpu1: <ACPI CPU> on acpi0
powernow1: <PowerNow! K8> on cpu1
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x10de, dev=0x0369, revid=0xa2
domain=0, bus=0, slot=0, func=0
class=05-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10de, dev=0x0360, revid=0xa3
domain=0, bus=0, slot=1, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x00a0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type I/O Port, range 32, base 0x2f00, size 7, enabled
found-> vendor=0x10de, dev=0x0368, revid=0xa3
domain=0, bus=0, slot=1, func=1
class=0c-05-00, hdrtype=0x00, mfdev=1
cmdreg=0x0001, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0x2900, size 6, enabled
map[20]: type I/O Port, range 32, base 0x2d00, size 6, enabled
map[24]: type I/O Port, range 32, base 0x2e00, size 6, enabled
pcib0: matched entry for 0.1.INTA (src \\_SB_.LSMB:0)
pci_link13: Picked IRQ 21 with weight 0
pcib0: slot 1 INTA routed to irq 21 via \\_SB_.LSMB
found-> vendor=0x10de, dev=0x036c, revid=0xa1
domain=0, bus=0, slot=2, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=a, irq=7
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xfeafb000, size 12, enabled
pcib0: matched entry for 0.2.INTA (src \\_SB_.LUB0:0)
pci_link8: Picked IRQ 22 with weight 0
pcib0: slot 2 INTA routed to irq 22 via \\_SB_.LUB0
found-> vendor=0x10de, dev=0x036d, revid=0xa2
domain=0, bus=0, slot=2, func=1
class=0c-03-20, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=b, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xfeafac00, size 8, enabled
pcib0: matched entry for 0.2.INTB (src \\_SB_.LUB2:0)
pci_link10: Picked IRQ 23 with weight 0
pcib0: slot 2 INTB routed to irq 23 via \\_SB_.LUB2
found-> vendor=0x10de, dev=0x036e, revid=0xa1
domain=0, bus=0, slot=4, func=0
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
powerspec 2 supports D0 D3 current D0
map[20]: type I/O Port, range 32, base 0xffa0, size 4, enabled
found-> vendor=0x10de, dev=0x037f, revid=0xa3
domain=0, bus=0, slot=5, func=0
class=01-01-85, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 4 messages, 64 bit
map[10]: type I/O Port, range 32, base 0xd480, size 3, enabled
map[14]: type I/O Port, range 32, base 0xd400, size 2, enabled
map[18]: type I/O Port, range 32, base 0xd080, size 3, enabled
map[1c]: type I/O Port, range 32, base 0xd000, size 2, enabled
map[20]: type I/O Port, range 32, base 0xcc00, size 4, enabled
map[24]: type Memory, range 32, base 0xfeaf9000, size 12, enabled
pcib0: matched entry for 0.5.INTA (src \\_SB_.LSA0:0)
pci_link15: Picked IRQ 21 with weight 1
pcib0: slot 5 INTA routed to irq 21 via \\_SB_.LSA0
found-> vendor=0x10de, dev=0x037f, revid=0xa3
domain=0, bus=0, slot=5, func=1
class=01-01-85, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=b, irq=5
powerspec 2 supports D0 D3 current D0
MSI supports 4 messages, 64 bit
map[10]: type I/O Port, range 32, base 0xc880, size 3, enabled
map[14]: type I/O Port, range 32, base 0xc800, size 2, enabled
map[18]: type I/O Port, range 32, base 0xc480, size 3, enabled
map[1c]: type I/O Port, range 32, base 0xc400, size 2, enabled
map[20]: type I/O Port, range 32, base 0xc080, size 4, enabled
map[24]: type Memory, range 32, base 0xfeaf8000, size 12, enabled
pcib0: matched entry for 0.5.INTB (src \\_SB_.LSA1:0)
pci_link16: Picked IRQ 22 with weight 1
pcib0: slot 5 INTB routed to irq 22 via \\_SB_.LSA1
found-> vendor=0x10de, dev=0x037f, revid=0xa3
domain=0, bus=0, slot=5, func=2
class=01-01-85, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=c, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 4 messages, 64 bit
map[10]: type I/O Port, range 32, base 0xc000, size 3, enabled
map[14]: type I/O Port, range 32, base 0xbc00, size 2, enabled
map[18]: type I/O Port, range 32, base 0xb880, size 3, enabled
map[1c]: type I/O Port, range 32, base 0xb800, size 2, enabled
map[20]: type I/O Port, range 32, base 0xb480, size 4, enabled
map[24]: type Memory, range 32, base 0xfeaf7000, size 12, enabled
pcib0: matched entry for 0.5.INTC (src \\_SB_.LSA2:0)
pci_link18: Picked IRQ 23 with weight 1
pcib0: slot 5 INTC routed to irq 23 via \\_SB_.LSA2
found-> vendor=0x10de, dev=0x0370, revid=0xa2
domain=0, bus=0, slot=6, func=0
class=06-04-01, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x1a (6500 ns), maxlat=0x02 (500 ns)
found-> vendor=0x10de, dev=0x0371, revid=0xa2
domain=0, bus=0, slot=6, func=1
class=04-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x05 (1250 ns)
intpin=b, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit, vector masks
map[10]: type Memory, range 32, base 0xfeaf0000, size 14, enabled
pcib0: matched entry for 0.6.INTB (src \\_SB_.LAZA:0)
pci_link12: Picked IRQ 21 with weight 2
pcib0: slot 6 INTB routed to irq 21 via \\_SB_.LAZA
found-> vendor=0x10de, dev=0x0373, revid=0xa3
domain=0, bus=0, slot=8, func=0
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x01 (250 ns), maxlat=0x14 (5000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
MSI supports 8 messages, 64 bit, vector masks
MSI-X supports 8 messages in maps 0x18 and 0x1c
map[10]: type Memory, range 32, base 0xfeaf6000, size 12, enabled
map[14]: type I/O Port, range 32, base 0xb400, size 3, enabled
map[18]: type Memory, range 32, base 0xfeafa800, size 8, enabled
map[1c]: type Memory, range 32, base 0xfeafa400, size 4, enabled
pcib0: matched entry for 0.8.INTA (src \\_SB_.LMAC:0)
pci_link11: Picked IRQ 20 with weight 0
pcib0: slot 8 INTA routed to irq 20 via \\_SB_.LMAC
found-> vendor=0x10de, dev=0x0373, revid=0xa3
domain=0, bus=0, slot=9, func=0
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x01 (250 ns), maxlat=0x14 (5000 ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
MSI supports 8 messages, 64 bit, vector masks
MSI-X supports 8 messages in maps 0x18 and 0x1c
map[10]: type Memory, range 32, base 0xfeaf5000, size 12, enabled
map[14]: type I/O Port, range 32, base 0xb080, size 3, enabled
map[18]: type Memory, range 32, base 0xfeafa000, size 8, enabled
map[1c]: type Memory, range 32, base 0xfeaf4c00, size 4, enabled
pcib0: matched entry for 0.9.INTA (src \\_SB_.LMAD:0)
pci_link9: Picked IRQ 20 with weight 1
pcib0: slot 9 INTA routed to irq 20 via \\_SB_.LMAD
found-> vendor=0x10de, dev=0x0376, revid=0xa3
domain=0, bus=0, slot=10, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0004, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
found-> vendor=0x10de, dev=0x0374, revid=0xa3
domain=0, bus=0, slot=11, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0004, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
found-> vendor=0x10de, dev=0x0374, revid=0xa3
domain=0, bus=0, slot=12, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0004, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
found-> vendor=0x10de, dev=0x0378, revid=0xa3
domain=0, bus=0, slot=13, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0004, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
found-> vendor=0x10de, dev=0x0375, revid=0xa3
domain=0, bus=0, slot=14, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0004, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
found-> vendor=0x10de, dev=0x0377, revid=0xa3
domain=0, bus=0, slot=15, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0004, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
found-> vendor=0x1022, dev=0x1100, revid=0x00
domain=0, bus=0, slot=24, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1101, revid=0x00
domain=0, bus=0, slot=24, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1102, revid=0x00
domain=0, bus=0, slot=24, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1103, revid=0x00
domain=0, bus=0, slot=24, func=3
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pci0: <memory, RAM> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> port 0x2f00-0x2f7f at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xfeafb000-0xfeafbfff irq 22
at device 2.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfeafb000
ioapic0: routing intpin 22 (PCI IRQ 22) to vector 49
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 10 ports with 10 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfeafac00-0xfeafacff irq
23 at device 2.1 on pci0
ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfeafac00
ioapic0: routing intpin 23 (PCI IRQ 23) to vector 50
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb1: EHCI version 1.0
usb1: companion controller, 10 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: <nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb1
uhub1: 10 ports with 10 removable, self powered
atapci0: <nVidia nForce MCP55 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 4.0 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xffa0
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=60 ostat1=70
ata0: stat0=0x20 err=0x20 lsb=0x20 msb=0x20
ata0: stat1=0x30 err=0x30 lsb=0x30 msb=0x30
ata0: reset tp2 stat0=20 stat1=30 devices=0x0
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 51
ata0: [MPSAFE]
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 52
ata1: [MPSAFE]
ata1: [ITHREAD]
atapci1: <nVidia nForce MCP55 SATA300 controller> port
0xd480-0xd487,0xd400-0xd403,0xd080-0xd087,0xd000-0xd003,0xcc00-0xcc0f
mem 0xfeaf9000-0xfeaf9fff irq 21 at device 5.0 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xcc00
ioapic0: routing intpin 21 (PCI IRQ 21) to vector 53
atapci1: [MPSAFE]
atapci1: [ITHREAD]
atapci1: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xfeaf9000
ata2: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xd480
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xd400
ata2: SATA connect time=0ms
ata2: reset tp1 mask=01 ostat0=50 ostat1=00
ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata2: [MPSAFE]
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0xd080
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xd000
ata3: SATA connect status=00000000
ata3: [MPSAFE]
ata3: [ITHREAD]
atapci2: <nVidia nForce MCP55 SATA300 controller> port
0xc880-0xc887,0xc800-0xc803,0xc480-0xc487,0xc400-0xc403,0xc080-0xc08f
mem 0xfeaf8000-0xfeaf8fff irq 22 at device 5.1 on pci0
atapci2: Reserved 0x10 bytes for rid 0x20 type 4 at 0xc080
atapci2: [MPSAFE]
atapci2: [ITHREAD]
atapci2: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xfeaf8000
ata4: <ATA channel 0> on atapci2
atapci2: Reserved 0x8 bytes for rid 0x10 type 4 at 0xc880
atapci2: Reserved 0x4 bytes for rid 0x14 type 4 at 0xc800
ata4: SATA connect status=00000000
ata4: [MPSAFE]
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci2
atapci2: Reserved 0x8 bytes for rid 0x18 type 4 at 0xc480
atapci2: Reserved 0x4 bytes for rid 0x1c type 4 at 0xc400
ata5: SATA connect status=00000000
ata5: [MPSAFE]
ata5: [ITHREAD]
atapci3: <nVidia nForce MCP55 SATA300 controller> port
0xc000-0xc007,0xbc00-0xbc03,0xb880-0xb887,0xb800-0xb803,0xb480-0xb48f
mem 0xfeaf7000-0xfeaf7fff irq 23 at device 5.2 on pci0
atapci3: Reserved 0x10 bytes for rid 0x20 type 4 at 0xb480
atapci3: [MPSAFE]
atapci3: [ITHREAD]
atapci3: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xfeaf7000
ata6: <ATA channel 0> on atapci3
atapci3: Reserved 0x8 bytes for rid 0x10 type 4 at 0xc000
atapci3: Reserved 0x4 bytes for rid 0x14 type 4 at 0xbc00
ata6: SATA connect status=00000000
ata6: [MPSAFE]
ata6: [ITHREAD]
ata7: <ATA channel 1> on atapci3
atapci3: Reserved 0x8 bytes for rid 0x18 type 4 at 0xb880
atapci3: Reserved 0x4 bytes for rid 0x1c type 4 at 0xb800
ata7: SATA connect status=00000000
ata7: [MPSAFE]
ata7: [ITHREAD]
pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xe000-0xefff
pcib1: memory decode 0xfeb00000-0xfebfffff
pcib1: prefetched decode 0xfd800000-0xfdffffff
pcib1: Subtractively decoded bridge.
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
found-> vendor=0x1095, dev=0x3114, revid=0x02
domain=0, bus=1, slot=0, func=0
class=01-04-00, hdrtype=0x00, mfdev=0
cmdreg=0x0107, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type I/O Port, range 32, base 0xec00, size 3, enabled
pcib1: requested I/O range 0xec00-0xec07: in range
map[14]: type I/O Port, range 32, base 0xe880, size 2, enabled
pcib1: requested I/O range 0xe880-0xe883: in range
map[18]: type I/O Port, range 32, base 0xe800, size 3, enabled
pcib1: requested I/O range 0xe800-0xe807: in range
map[1c]: type I/O Port, range 32, base 0xe480, size 2, enabled
pcib1: requested I/O range 0xe480-0xe483: in range
map[20]: type I/O Port, range 32, base 0xe400, size 4, enabled
pcib1: requested I/O range 0xe400-0xe40f: in range
map[24]: type Memory, range 32, base 0xfebffc00, size 10, enabled
pcib1: requested memory range 0xfebffc00-0xfebfffff: good
pcib1: matched entry for 1.0.INTA (src \\_SB_.LNKA:0)
pci_link0: Picked IRQ 16 with weight 0
pcib1: slot 0 INTA routed to irq 16 via \\_SB_.LNKA
found-> vendor=0x102b, dev=0x0519, revid=0x01
domain=0, bus=1, slot=1, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0083, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
map[10]: type Memory, range 32, base 0xfebf8000, size 14, enabled
pcib1: requested memory range 0xfebf8000-0xfebfbfff: good
map[14]: type Prefetchable Memory, range 32, base 0xfd800000,
size 23, enabled
pcib1: requested memory range 0xfd800000-0xfdffffff: good
pcib1: matched entry for 1.1.INTA (src \\_SB_.LNKB:0)
pci_link1: Picked IRQ 17 with weight 0
pcib1: slot 1 INTA routed to irq 17 via \\_SB_.LNKB
found-> vendor=0x1106, dev=0x3044, revid=0x80
domain=0, bus=1, slot=4, func=0
class=0c-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x20 (8000 ns)
intpin=a, irq=10
powerspec 2 supports D0 D2 D3 current D0
map[10]: type Memory, range 32, base 0xfebff000, size 11, enabled
pcib1: requested memory range 0xfebff000-0xfebff7ff: good
map[14]: type I/O Port, range 32, base 0xe080, size 7, enabled
pcib1: requested I/O range 0xe080-0xe0ff: in range
pcib1: matched entry for 1.4.INTA (src \\_SB_.LNKD:0)
pci_link3: Picked IRQ 18 with weight 0
pcib1: slot 4 INTA routed to irq 18 via \\_SB_.LNKD
atapci4: <SiI SiI 3114 SATA150 controller> port
0xec00-0xec07,0xe880-0xe883,0xe800-0xe807,0xe480-0xe483,0xe400-0xe40f
mem 0xfebffc00-0xfebfffff irq 16 at device 0.0 on pci1
atapci4: Reserved 0x10 bytes for rid 0x20 type 4 at 0xe400
ioapic0: routing intpin 16 (PCI IRQ 16) to vector 54
atapci4: [MPSAFE]
atapci4: [ITHREAD]
atapci4: Reserved 0x400 bytes for rid 0x24 type 3 at 0xfebffc00
ata8: <ATA channel 0> on atapci4
ata8: SATA connect time=0ms
ata8: reset tp1 mask=01 ostat0=50 ostat1=00
ata8: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata8: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata8: [MPSAFE]
ata8: [ITHREAD]
ata9: <ATA channel 1> on atapci4
ata9: SATA connect time=0ms
ata9: reset tp1 mask=01 ostat0=50 ostat1=00
ata9: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata9: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata9: [MPSAFE]
ata9: [ITHREAD]
ata10: <ATA channel 2> on atapci4
ata10: SATA connect time=0ms
ata10: reset tp1 mask=01 ostat0=50 ostat1=00
ata10: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata10: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata10: [MPSAFE]
ata10: [ITHREAD]
ata11: <ATA channel 3> on atapci4
ata11: SATA connect time=0ms
ata11: reset tp1 mask=01 ostat0=50 ostat1=00
ata11: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata11: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata11: [MPSAFE]
ata11: [ITHREAD]
vgapci0: <VGA-compatible display> mem
0xfebf8000-0xfebfbfff,0xfd800000-0xfdffffff irq 17 at device 1.0 on pci1
fwohci0: <VIA Fire II (VT6306)> port 0xe080-0xe0ff mem
0xfebff000-0xfebff7ff irq 18 at device 4.0 on pci1
fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xfebff000
ioapic0: routing intpin 18 (PCI IRQ 18) to vector 55
fwohci0: [MPSAFE]
fwohci0: [FILTER]
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:10:dc:00:01:07:3b:4e
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x13dc000
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:10:dc:07:3b:4e
fwe0: bpf attached
fwe0: Ethernet address: 02:10:dc:07:3b:4e
fwip0: <IP over FireWire> on firewire0
fwip0: bpf attached
fwip0: Firewire address: 00:10:dc:00:01:07:3b:4e @ 0xfffe00000000, S400,
maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
pci0: <multimedia> at device 6.1 (no driver attached)
nfe0: <NVIDIA nForce MCP55 Networking Adapter> port 0xb400-0xb407 mem
0xfeaf6000-0xfeaf6fff,0xfeafa800-0xfeafa8ff,0xfeafa400-0xfeafa40f irq 20
at device 8.0 on pci0
nfe0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfeaf6000
nfe0: Reserved 0x100 bytes for rid 0x18 type 3 at 0xfeafa800
nfe0: Reserved 0x10 bytes for rid 0x1c type 3 at 0xfeafa400
nfe0: attempting to allocate 8 MSI-X vectors (8 supported)
msi: routing MSI-X IRQ 256 to vector 56
msi: routing MSI-X IRQ 257 to vector 57
msi: routing MSI-X IRQ 258 to vector 58
msi: routing MSI-X IRQ 259 to vector 59
msi: routing MSI-X IRQ 260 to vector 60
msi: routing MSI-X IRQ 261 to vector 61
msi: routing MSI-X IRQ 262 to vector 62
msi: routing MSI-X IRQ 263 to vector 63
nfe0: using IRQs 256-263 for MSI-X
nfe0: Using 8 MSIX messages
miibus0: <MII bus> on nfe0
ciphy0: <Vitesse VSC8601 10/100/1000TX PHY> PHY 0 on miibus0
ciphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
nfe0: bpf attached
nfe0: Ethernet address: 00:19:db:cf:4c:c2
nfe0: [MPSAFE]
nfe0: [FILTER]
nfe0: [MPSAFE]
nfe0: [FILTER]
nfe0: [MPSAFE]
nfe0: [FILTER]
nfe0: [MPSAFE]
nfe0: [FILTER]
nfe0: [MPSAFE]
nfe0: [FILTER]
nfe0: [MPSAFE]
nfe0: [FILTER]
nfe0: [MPSAFE]
nfe0: [FILTER]
nfe0: [MPSAFE]
nfe0: [FILTER]
nfe1: <NVIDIA nForce MCP55 Networking Adapter> port 0xb080-0xb087 mem
0xfeaf5000-0xfeaf5fff,0xfeafa000-0xfeafa0ff,0xfeaf4c00-0xfeaf4c0f irq 20
at device 9.0 on pci0
nfe1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfeaf5000
nfe1: Reserved 0x100 bytes for rid 0x18 type 3 at 0xfeafa000
nfe1: Reserved 0x10 bytes for rid 0x1c type 3 at 0xfeaf4c00
nfe1: attempting to allocate 8 MSI-X vectors (8 supported)
msi: routing MSI-X IRQ 264 to vector 64
msi: routing MSI-X IRQ 265 to vector 65
msi: routing MSI-X IRQ 266 to vector 66
msi: routing MSI-X IRQ 267 to vector 67
msi: routing MSI-X IRQ 268 to vector 68
msi: routing MSI-X IRQ 269 to vector 69
msi: routing MSI-X IRQ 270 to vector 70
msi: routing MSI-X IRQ 271 to vector 71
nfe1: using IRQs 264-271 for MSI-X
nfe1: Using 8 MSIX messages
miibus1: <MII bus> on nfe1
ciphy1: <Vitesse VSC8601 10/100/1000TX PHY> PHY 1 on miibus1
ciphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
nfe1: bpf attached
nfe1: Ethernet address: 00:19:db:cf:65:95
nfe1: [MPSAFE]
nfe1: [FILTER]
nfe1: [MPSAFE]
nfe1: [FILTER]
nfe1: [MPSAFE]
nfe1: [FILTER]
nfe1: [MPSAFE]
nfe1: [FILTER]
nfe1: [MPSAFE]
nfe1: [FILTER]
nfe1: [MPSAFE]
nfe1: [FILTER]
nfe1: [MPSAFE]
nfe1: [FILTER]
nfe1: [MPSAFE]
nfe1: [FILTER]
pcib2: <ACPI PCI-PCI bridge> at device 10.0 on pci0
pcib2: domain 0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0x0-0x0
pcib2: no prefetched decode
pci2: <ACPI PCI bus> on pcib2
pci2: domain=0, physical bus=2
pcib3: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pcib3: domain 0
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: I/O decode 0x0-0x0
pcib3: no prefetched decode
pci3: <ACPI PCI bus> on pcib3
pci3: domain=0, physical bus=3
pcib4: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pcib4: domain 0
pcib4: secondary bus 4
pcib4: subordinate bus 4
pcib4: I/O decode 0x0-0x0
pcib4: no prefetched decode
pci4: <ACPI PCI bus> on pcib4
pci4: domain=0, physical bus=4
pcib5: <ACPI PCI-PCI bridge> at device 13.0 on pci0
pcib5: domain 0
pcib5: secondary bus 5
pcib5: subordinate bus 5
pcib5: I/O decode 0x0-0x0
pcib5: no prefetched decode
pci5: <ACPI PCI bus> on pcib5
pci5: domain=0, physical bus=5
pcib6: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pcib6: domain 0
pcib6: secondary bus 6
pcib6: subordinate bus 6
pcib6: I/O decode 0x0-0x0
pcib6: no prefetched decode
pci6: <ACPI PCI bus> on pcib6
pci6: domain=0, physical bus=6
pcib7: <ACPI PCI-PCI bridge> at device 15.0 on pci0
pcib7: domain 0
pcib7: secondary bus 7
pcib7: subordinate bus 7
pcib7: I/O decode 0x0-0x0
pcib7: no prefetched decode
pci7: <ACPI PCI bus> on pcib7
pci7: domain=0, physical bus=7
acpi_button0: <Power Button> on acpi0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 72
sio0: [FILTER]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 73
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
ioapic0: routing intpin 12 (ISA IRQ 12) to vector 74
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
ahc_isa_probe 2: ioport 0x2c00 alloc failed
ahc_isa_probe 11: ioport 0xbc00 alloc failed
ahc_isa_probe 12: ioport 0xcc00 alloc failed
ahc_isa_probe 14: ioport 0xec00 alloc failed
ex_isa_identify()
atkbdc: atkbdc0 already exists; skipping it
sio: sio0 already exists; skipping it
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xccfff on isa0
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0 0 0 0
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 258371 -> 100000
procfs registered
lapic: Divisor 2, Frequency 100000744 hz
Timecounter "TSC" frequency 2300017027 Hz quality -100
Timecounters tick every 1.000 msec
lo0: bpf attached
hptrr: no controller detected.
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad4: 238475MB <Seagate ST3250824AS 3.AAE> at ata2-master SATA300
ad4: 488397168 sectors [484521C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad4
ad4: nVidia check1 failed
ad4: Adaptec check1 failed
ad4: LSI (v3) check1 failed
ad4: LSI (v2) check1 failed
ad4: FreeBSD check1 failed
ata8-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire
ad16: 114473MB <FUJITSU MHW2120BH 00810013> at ata8-master SATA150
ad16: 234441648 sectors [232581C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad16
ad16: Silicon Image check2 failed
ad16: Adaptec check1 failed
ad16: LSI (v3) check1 failed
ad16: LSI (v2) check1 failed
ad16: FreeBSD check1 failed
ata9-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad18: 476940MB <WDC WD5000AAKS-00YGA0 12.01C02> at ata9-master SATA150
ad18: 976773168 sectors [969021C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad18
ad18: Silicon Image check2 failed
ad18: Adaptec check1 failed
ad18: LSI (v3) check1 failed
ad18: LSI (v2) check1 failed
ad18: FreeBSD check1 failed
ata10-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad20: 476940MB <WDC WD5000AAKS-00YGA0 12.01C02> at ata10-master SATA150
ad20: 976773168 sectors [969021C/16H/63S] 16 sectors/interrupt 1 depth queue
ad20: Silicon Image check2 failed
ad20: Adaptec check1 failed
ad20: LSI (v3) check1 failed
ad20: LSI (v2) check1 failed
ad20: FreeBSD check1 failed
ata11-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad22: 476940MB <WDC WD5000AAKS-00YGA0 12.01C02> at ata11-master SATA150
ad22: 976773168 sectors [969021C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad20
ad22: Silicon Image check2 failed
ad22: Adaptec check1 failed
ad22: LSI (v3) check1 failed
ad22: LSI (v2) check1 failed
ad22: FreeBSD check1 failed
GEOM: new disk ad22
(probe0:sbp0:0:0:0): error 22
(probe0:sbp0:0:0:0): Unretryable Error
(probe1:sbp0:0:1:0): error 22
(probe1:sbp0:0:1:0): Unretryable Error
(probe2:sbp0:0:2:0): error 22
(probe2:sbp0:0:2:0): Unretryable Error
(probe3:sbp0:0:3:0): error 22
(probe3:sbp0:0:3:0): Unretryable Error
(probe4:sbp0:0:4:0): error 22
(probe4:sbp0:0:4:0): Unretryable Error
(probe5:sbp0:0:5:0): error 22
(probe5:sbp0:0:5:0): Unretryable Error
(probe6:sbp0:0:6:0): error 22
(probe6:sbp0:0:6:0): Unretryable Error
ATA PseudoRAID loaded
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
ioapic0: Assigning ISA IRQ 1 to local APIC 0
ioapic0: Assigning ISA IRQ 4 to local APIC 1
ioapic0: Assigning ISA IRQ 9 to local APIC 0
ioapic0: Assigning ISA IRQ 12 to local APIC 1
ioapic0: Assigning ISA IRQ 14 to local APIC 0
ioapic0: Assigning ISA IRQ 15 to local APIC 1
ioapic0: Assigning PCI IRQ 16 to local APIC 0
ioapic0: Assigning PCI IRQ 18 to local APIC 1
ioapic0: Assigning PCI IRQ 21 to local APIC 0
ioapic0: Assigning PCI IRQ 22 to local APIC 1
ioapic0: Assigning PCI IRQ 23 to local APIC 0
msi: Assigning MSI-X IRQ 256 to local APIC 1
msi: Assigning MSI-X IRQ 257 to local APIC 0
msi: Assigning MSI-X IRQ 258 to local APIC 1
msi: Assigning MSI-X IRQ 259 to local APIC 0
msi: Assigning MSI-X IRQ 260 to local APIC 1
msi: Assigning MSI-X IRQ 261 to local APIC 0
msi: Assigning MSI-X IRQ 262 to local APIC 1
msi: Assigning MSI-X IRQ 263 to local APIC 0
msi: Assigning MSI-X IRQ 264 to local APIC 1
msi: Assigning MSI-X IRQ 265 to local APIC 0
msi: Assigning MSI-X IRQ 266 to local APIC 1
msi: Assigning MSI-X IRQ 267 to local APIC 0
msi: Assigning MSI-X IRQ 268 to local APIC 1
msi: Assigning MSI-X IRQ 269 to local APIC 0
msi: Assigning MSI-X IRQ 270 to local APIC 1
msi: Assigning MSI-X IRQ 271 to local APIC 0
Trying to mount root from ufs:/dev/ad16s1a
start_init: trying /sbin/init
WARNING: ZFS is considered to be an experimental feature in FreeBSD.
ZFS filesystem version 6
ZFS storage pool version 6
nfe0: link state changed to UP
GEOM: Reconfigure ad4s1c, start 0 length 250056705024 end 250056705023
GEOM: Reconfigure ad4s1d, start 0 length 250056705024 end 250056705023
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200802072120.m17LK3bt007427>