Date: Sun, 8 Mar 2009 20:41:45 -1000 From: Clifton Royston <cliftonr@lava.net> To: Pyun YongHyeon <pyunyh@gmail.com> Cc: Sascha Holzleiter <sascha@holzleiter.name>, Gavin Stone-Tolcher <g.stone-tolcher@its.uq.edu.au>, freebsd-stable@freebsd.org, Jung-uk Kim <jkim@freebsd.org> Subject: re/rl for 6-STABLE (Was Re: FreeBSD 7.1 Breaks re and rl Network Interface Drivers) Message-ID: <20090309064144.GA18180@lava.net> In-Reply-To: <20090309060346.GG5039@michelle.cdnetworks.co.kr> References: <20090308023642.GB1531@michelle.cdnetworks.co.kr> <93D48C8BEA0F954FA6569C8A853EF79C02CE62E0@UQEXMB1.soe.uq.edu.au> <20090309060346.GG5039@michelle.cdnetworks.co.kr>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, Mar 09, 2009 at 03:03:46PM +0900, Pyun YongHyeon wrote: ... > Thanks a lot! This is the report I had been waiting for. I've > committed the patch to HEAD(r189555). As long as you're thinking about the re/rl driver, I have been meaning to report to you that the patch you've posted for 6-STABLE has been working fine on 6.4-RELEASE with a Gigabyte motherboard using an onboard RTL8168 Gigabit Ethernet chip. It was unidentified with 6.4-RELEASE, but after I applied the patches I found described at http://people.freebsd.org/~yongari/re/6.x/README and rebuilt the kernel, it was detected and worked properly. (I don't have a Gigabit switch, so I'm only running at 100baseTX at present.) -- Clifton uname -v: FreeBSD 6.4-RELEASE #0: Thu Mar 5 21:32:53 HST 2009 root@oz.volcano.org:/var/tmp/usr.obj/usr/src/sys/SMP dmesg output: ... re0: <RealTek 8168/8168B/8168C/8168CP/8111B/8111C/8111CP PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xe1110000-0xe1110fff,0xe1100000-0xe110ffff irq 17 at dev ice 0.0 on pci2 re0: Chip rev. 0x3c000000 re0: MAC rev. 0x00400000 miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S/8211B media interface> on miibus0 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto pciconf -lv output: ... re0@pci2:0:0: class=0x020000 card=0xe0001458 chip=0x816810ec rev=0x02 hdr=0x00 vendor = 'Realtek Semiconductor' device = 'RTL8168/8111 PCI-E Gigabit Ethernet NIC' class = network subclass = ethernet ifconfig output: re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING> inet x.y.z.w ... inet x.y.z.v ... ether 00:1f:d0:cd:3c:9c media: Ethernet autoselect (100baseTX <full-duplex>) status: active -- Clifton Royston -- cliftonr@iandicomputing.com / cliftonr@lava.net President - I and I Computing * http://www.iandicomputing.com/ Custom programming, network design, systems and network consulting services
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20090309064144.GA18180>