Date: Thu, 14 Jan 1999 20:09:03 -0800 From: Piet Delaney <piet@cup.hp.com> To: dg@root.com, ckempf@enigami.com Cc: piet@hpfsvr02.cup.hp.com, piet@piet.net, obrien@nuxi.com, tef@postgres.dtcom.dp.ua, joe@monk.via.ne, stevet@acs.stritch.edu, casanoba@ailab10.sogang.ac.kr, fischer@nwe.ufl.edu, stealth-admin@viaduk.net, freebsd-questions@FreeBSD.ORG, gibbs@FreeBSD.ORG, edmond@shaman.cup.hp.com, hackers@FreeBSD.ORG, current@FreeBSD.ORG, jack@rome.cs.miami.edu, deischen@iworks.InterWorks.org, hank@wsm.com, xiyuan@npc.haplink.com.cn, gigabyte@tpts1.seed.net.tw, info-gbt@giga-byte.com, freebsd-questions@FreeBSD.ORG, dg@root.com, nasir@asacomputers.com, rwm@tansoft.com, oblio@eyeintegrated.com, mango@staff.communique.net Subject: Looking for Suggestion on Booting FreeBSD 3.0 on a Gigabyte GA-6BXDS board with Dual Pentiun II and Adaptec 7895 Ultra Wide SCSI-3 Controlers Message-ID: <369EBF5F.23AC@cup.hp.com>
next in thread | raw e-mail | index | archive | help
Hi David, Cory, Dave, Folks: I thought it was about time to try out FreeBSD, most likely 3.0, so I picked up a PC board from Gigabyte, the GA-6BXDS Dual Scsi-3 that has an onboard Adaptec 7895 controler. About a year ago you (David) said Justin was working on a 7895 scsi controler. I didn't see anything in the FreeBSD handbook on support for the Adaptic 7895 (seems to be getting rather out of date). Now I've read from Cory that you need a CAM scsi driver. Last I see it was still only available as patches. Why is it taking so long to get it integrated into the current src? So I have to get an IDE drive and install onto that, get the CAM patches (from where?), run patch, etc... and linux supports it a standard controler? I can't believe this. Perhaps you could update me on the 7895 support and perhaps have some suggestion on setting up this board to run FreeBSD. For example can I boot the 3.0 FreeBSD off of a CDROM on the scsi adapters; I sort of doubt it. Is the FreeBSD getting the information it needs from Gigabyte and Adaptec so that these boards are well supported? -piet To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?369EBF5F.23AC>