Date: Fri, 9 Sep 2022 21:36:49 +0000 (GMT) From: jenkins-admin@FreeBSD.org To: bz@FreeBSD.org, mjg@FreeBSD.org, dev-ci@FreeBSD.org Cc: jenkins-admin@FreeBSD.org Subject: FreeBSD-main-amd64-test - Build #22050 - Failure Message-ID: <1740641477.341.1662759410247@jenkins.ci.freebsd.org>
next in thread | raw e-mail | index | archive | help
------=_Part_340_1736486857.1662759409730 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: quoted-printable FreeBSD-main-amd64-test - Build #22050 (800aa9cd3d8050c1d873a1db02d9a546dca= 8c42e) - Failure Build information: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/22050= / Full change log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/22050/c= hanges Full build log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/22050/co= nsole Status explanation: "Failure" - the build is suspected being broken by the following changes "Still Failing" - the build has not been fixed by the following changes and this is a notification to note that these changes have not been fully tested by the CI system Change summaries: (Those commits are likely but not certainly responsible) d6d687daaa4531c4a84b82cde46c9906c3c02f55 by bz: LinuxKPI: 80211: add ieee80211_stop_tx_ba_session() 8e93258f2686c76b4e3b384a904d8b4413976229 by bz: rtw89: import Realtek's rtw89 driver 866e021654cfb72c050fd228dee476fb92fa6f48 by bz: rtw89: import firmware for Realtek's rtw89 supported chipsets. 6b94546a7ea2dc593f5765bd5465a8b7bb80c325 by mjg: pf: partially depessimize pf_match_translation e5d08f472977fa6caa93805aa0dc8593c4e48cdf by mjg: pf: remove pf_bcmp_state_key 800aa9cd3d8050c1d873a1db02d9a546dca8c42e by bz: LinuxKPI: 80211 (+net80211): update and cleanup headers The end of the build log: [...truncated 3.99 MB...] Limiting icmp ping response from 269 to 200 packets/sec Limiting icmp ping response from 264 to 191 packets/sec Limiting icmp ping response from 267 to 201 packets/sec Limiting icmp ping response from 248 to 191 packets/sec Limiting icmp ping response from 265 to 189 packets/sec Limiting icmp ping response from 245 to 184 packets/sec Limiting icmp ping response from 250 to 209 packets/sec epair51b: link state changed to DOWN epair51a: link state changed to DOWN passed [18.357s] sys/netpfil/common/dummynet:pf_queue_v6 -> epair51a: Ethernet address: 02= :a7:3c:9f:37:0a epair51b: Ethernet address: 02:a7:3c:9f:37:0b epair51a: link state changed to UP epair51b: link state changed to UP epair51b: link state changed to DOWN epair51a: link state changed to DOWN passed [14.027s] sys/netpfil/common/forward:ipf_v4 -> epair51a: Ethernet address: 02:ea:c2= :60:7c:0a epair51b: Ethernet address: 02:ea:c2:60:7c:0b epair51a: link state changed to UP epair51b: link state changed to UP epair52a: Ethernet address: 02:d7:6f:48:a1:0a epair52b: Ethernet address: 02:d7:6f:48:a1:0b epair52a: link state changed to UP epair52b: link state changed to UP epair51a: promiscuous mode enabled epair52a: promiscuous mode enabled epair51a: promiscuous mode disabled epair52a: promiscuous mode disabled epair51a: promiscuous mode enabled epair52a: promiscuous mode enabled epair51a: promiscuous mode disabled epair52a: promiscuous mode disabled epair52a: promiscuous mode enabled epair51a: promiscuous mode enabled epair51a: promiscuous mode disabled epair52a: promiscuous mode disabled epair51b: link state changed to DOWN epair51a: link state changed to DOWN epair52b: link state changed to DOWN epair52a: link state changed to DOWN passed [35.064s] sys/netpfil/common/forward:ipfw_v4 -> epair51a: Ethernet address: 02:e8:1= f:59:a0:0a epair51b: Ethernet address: 02:e8:1f:59:a0:0b epair51a: link state changed to UP epair51b: link state changed to UP epair52a: Ethernet address: 02:87:52:91:6e:0a epair52b: Ethernet address: 02:87:52:91:6e:0b epair52a: link state changed to UP epair52b: link state changed to UP epair52a: promiscuous mode enabled epair51a: promiscuous mode enabled epair51a: promiscuous mode disabled epair52a: promiscuous mode disabled epair51a: promiscuous mode enabled epair52a: promiscuous mode enabled epair51a: promiscuous mode disabled epair52a: promiscuous mode disabled epair52a: promiscuous mode enabled epair51a: promiscuous mode enabled epair51a: promiscuous mode disabled epair52a: promiscuous mode disabled epair51b: link state changed to DOWN epair51a: link state changed to DOWN epair52b: link state changed to DOWN epair52a: link state changed to DOWN passed [35.345s] sys/netpfil/common/forward:pf_v4 -> epair51a: Ethernet address: 02:12:68:= f5:82:0a epair51b: Ethernet address: 02:12:68:f5:82:0b epair51a: link state changed to UP epair51b: link state changed to UP epair52a: Ethernet address: 02:80:79:65:7c:0a epair52b: Ethernet address: 02:80:79:65:7c:0b epair52a: link state changed to UP epair52b: link state changed to UP epair51a: promiscuous mode enabled epair52a: promiscuous mode enabled epair51a: promiscuous mode disabled epair52a: promiscuous mode disabled epair51a: promiscuous mode enabled epair52a: promiscuous mode enabled epair51a: promiscuous mode disabled epair52a: promiscuous mode disabled epair52a: promiscuous mode enabled epair51a: promiscuous mode enabled epair51a: promiscuous mode disabled epair52a: promiscuous mode disabled epair51b: link state changed to DOWN epair51a: link state changed to DOWN epair52b: link state changed to DOWN epair52a: link state changed to DOWN passed [35.286s] sys/netpfil/common/fragments:ipf_fragments -> epair51a: Ethernet address:= 02:36:8c:5a:47:0a epair51b: Ethernet address: 02:36:8c:5a:47:0b epair51a: link state changed to UP epair51b: link state changed to UP nd6_setmtu0: new link MTU on epair51b (200) is too small for IPv6 nd6_setmtu0: new link MTU on epair51a (200) is too small for IPv6 epair51a: link state changed to DOWN epair51b: link state changed to DOWN passed [11.178s] sys/netpfil/common/fragments:ipfw_fragments -> epair51a: Ethernet address= : 02:c4:68:82:3c:0a epair51b: Ethernet address: 02:c4:68:82:3c:0b epair51a: link state changed to UP epair51b: link state changed to UP nd6_setmtu0: new link MTU on epair51b (200) is too small for IPv6 nd6_setmtu0: new link MTU on epair51a (200) is too small for IPv6 epair51a: link state changed to DOWN epair51b: link state changed to DOWN passed [11.218s] sys/netpfil/common/fragments:pf_fragments -> epair51a: Ethernet address: = 02:5c:0a:8f:e6:0a epair51b: Ethernet address: 02:5c:0a:8f:e6:0b epair51a: link state changed to UP epair51b: link state changed to UP nd6_setmtu0: new link MTU on epair51b (200) is too small for IPv6 nd6_setmtu0: new link MTU on epair51a (200) is too small for IPv6 epair51a: link state changed to DOWN epair51b: link state changed to DOWN passed [11.229s] sys/netpfil/common/nat:ipfnat_basic -> epair51a: Ethernet address: 02:7b:= a8:a3:ab:0a epair51b: Ethernet address: 02:7b:a8:a3:ab:0b epair51a: link state changed to UP epair51b: link state changed to UP epair52a: Ethernet address: 02:8c:db:8b:a0:0a epair52b: Ethernet address: 02:8c:db:8b:a0:0b epair52a: link state changed to UP epair52b: link state changed to UP epair53a: Ethernet address: 02:47:98:07:fe:0a epair53b: Ethernet address: 02:47:98:07:fe:0b epair53a: link state changed to UP epair53b: link state changed to UP epair51b: link state changed to DOWN epair51a: link state changed to DOWN epair52a: link state changed to DOWN epair52b: link state changed to DOWN epair53a: link state changed to DOWN epair53b: link state changed to DOWN passed [2.365s] sys/netpfil/common/nat:ipfw_basic -> epair51a: Ethernet address: 02:e2:bf= :b2:5e:0a epair51b: Ethernet address: 02:e2:bf:b2:5e:0b epair51a: link state changed to UP epair51b: link state changed to UP epair52a: Ethernet address: 02:d8:d0:fe:d3:0a epair52b: Ethernet address: 02:d8:d0:fe:d3:0b epair52a: link state changed to UP epair52b: link state changed to UP epair53a: Ethernet address: 02:3c:0b:01:67:0a epair53b: Ethernet address: 02:3c:0b:01:67:0b epair53a: link state changed to UP epair53b: link state changed to UP epair51b: link state changed to DOWN epair51a: link state changed to DOWN epair52a: link state changed to DOWN epair52b: link state changed to DOWN epair53a: link state changed to DOWN epair53b: link state changed to DOWN passed [2.364s] sys/netpfil/common/nat:ipfw_cgn -> epair51a: Ethernet address: 02:80:50:8= 3:2b:0a epair51b: Ethernet address: 02:80:50:83:2b:0b epair51a: link state changed to UP epair51b: link state changed to UP epair52a: Ethernet address: 02:8e:a0:9c:23:0a epair52b: Ethernet address: 02:8e:a0:9c:23:0b epair52a: link state changed to UP epair52b: link state changed to UP epair53a: Ethernet address: 02:46:eb:5d:70:0a epair53b: Ethernet address: 02:46:eb:5d:70:0b epair53a: link state changed to UP epair53b: link state changed to UP epair51b: link state changed to DOWN epair51a: link state changed to DOWN panic: ipreass_callout: stray callout on bucket 0xfffffe008fbfd600 cpuid =3D 0 time =3D 1662759409 KDB: stack backtrace: db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe000edce= d10 vpanic() at vpanic+0x151/frame 0xfffffe000edced60 panic() at panic+0x43/frame 0xfffffe000edcedc0 ipreass_callout() at ipreass_callout+0x1e0/frame 0xfffffe000edcee00 softclock_call_cc() at softclock_call_cc+0x151/frame 0xfffffe000edceec0 softclock_thread() at softclock_thread+0xc6/frame 0xfffffe000edceef0 fork_exit() at fork_exit+0x80/frame 0xfffffe000edcef30 fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe000edcef30 --- trap 0, rip =3D 0, rsp =3D 0, rbp =3D 0 --- KDB: enter: panic [ thread pid 2 tid 100029 ] Stopped at kdb_enter+0x32: movq $0,0x1296083(%rip) db:0:kdb.enter.panic> show pcpu cpuid =3D 0 dynamic pcpu =3D 0x9c3e40 curthread =3D 0xfffffe00112b63a0: pid 2 tid 100029 critnest 1 "clock (0)= " curpcb =3D 0xfffffe00112b68c0 fpcurthread =3D none idlethread =3D 0xfffffe00112223a0: tid 100003 "idle: cpu0" self =3D 0xffffffff82610000 curpmap =3D 0xffffffff81e81bf0 tssp =3D 0xffffffff82610384 rsp0 =3D 0xfffffe000edcf000 kcr3 =3D 0x8000000002569003 ucr3 =3D 0xffffffffffffffff scr3 =3D 0x18da092e gs32p =3D 0xffffffff82610404 ldt =3D 0xffffffff82610444 tss =3D 0xffffffff82610434 curvnet =3D 0xfffff800030d3000 spin locks held: db:0:kdb.enter.panic> reset + rc=3D0 + echo 'bhyve return code =3D 0' bhyve return code =3D 0 + sudo /usr/sbin/bhyvectl '--vm=3Dtestvm-main-amd64-22050' --destroy + sh -ex freebsd-ci/scripts/test/extract-meta.sh + METAOUTDIR=3Dmeta-out + rm -fr meta-out + mkdir meta-out + tar xvf meta.tar -C meta-out x ./ x ./disable-dtrace-tests.sh x ./auto-shutdown x ./run.sh x ./disable-notyet-tests.sh x ./disable-zfs-tests.sh x ./run-kyua.sh + rm -f test-report.txt test-report.xml + mv 'meta-out/test-report.*' . mv: rename meta-out/test-report.* to ./test-report.*: No such file or direc= tory + report=3Dtest-report.xml + [ -e freebsd-ci/jobs/FreeBSD-main-amd64-test/xfail-list -a -e test-report= .xml ] + rm -f disk-cam + jot 5 + rm -f disk1 + rm -f disk2 + rm -f disk3 + rm -f disk4 + rm -f disk5 + rm -f disk-test.img [PostBuildScript] - [INFO] Executing post build scripts. [FreeBSD-main-amd64-test] $ /bin/sh -xe /tmp/jenkins961571184827844345.sh + ./freebsd-ci/artifact/post-link.py Post link: {'job_name': 'FreeBSD-main-amd64-test', 'commit': '800aa9cd3d805= 0c1d873a1db02d9a546dca8c42e', 'branch': 'main', 'target': 'amd64', 'target_= arch': 'amd64', 'link_type': 'latest_tested'} "Link created: main/latest_tested/amd64/amd64 -> ../../800aa9cd3d8050c1d873= a1db02d9a546dca8c42e/amd64/amd64\n" Recording test results ERROR: Step =E2=80=98Publish JUnit test result report=E2=80=99 failed: No t= est report files were found. Configuration error? Checking for post-build Performing post-build step Checking if email needs to be generated Email was triggered for: Failure - Any Sending email for trigger: Failure - Any Sending mail from default account using System Admin e-mail address ------=_Part_340_1736486857.1662759409730--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1740641477.341.1662759410247>