Date: Fri, 9 Jun 2006 10:23:25 GMT From: Geoff Buckingham <geoff.buckingham@reuters.com> To: freebsd-gnats-submit@FreeBSD.org Subject: kern/98743: ATA panic and or timeout on IBM/Lenovo S50 with MB rev 2.7, Seagate ST340014A 8.10 and HL-DT-ST CD-ROM GCR-8482B/1.06 Message-ID: <200606091023.k59ANPfk030746@www.freebsd.org> Resent-Message-ID: <200606091030.k59AUKeJ020020@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 98743
>Category: kern
>Synopsis: ATA panic and or timeout on IBM/Lenovo S50 with MB rev 2.7, Seagate ST340014A 8.10 and HL-DT-ST CD-ROM GCR-8482B/1.06
>Confidential: no
>Severity: serious
>Priority: medium
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Fri Jun 09 10:30:20 GMT 2006
>Closed-Date:
>Last-Modified:
>Originator: Geoff Buckingham
>Release: RELENG_4, RELENG_6
>Organization:
Reuters
>Environment:
RELENG_4, RELENG_6
>Description:
We first found this in RELENG_4, with this motherboard, drive and CD, we have confirmed it on multiple systems. With the HD as Master and CD as slave (via cable select or jumperd) we get "ata0-slave: ATA identify retries exceeded"
(boot -v from 4.11 included bellow)
However if we make the CD master and HD slave via cable select or jumpers all works fine.
In RELENG_6 a regular boot on the vga console panics while trying to identify the ata0 slave when CD is slave. However boot -v on the vga console works as does any boot on a comconsole. (Does this suggest some kind of timing problem?)
Again making the CD master and HD fixes this.
In RELENG_4 we found either using a rev 2.6 MB, or replacing either the HD or CD with another model (IBM deskstar HD or an old HP CD-R) would also work round the problem.
Linux and windows work OK with CD as slave or master.
As the panic doesn't occur when using the serial console I only have it as a JPEG which I can email on request.
Hyperterminal rather mangled the RELENG_6 boot -v output but this is the ata device section:
ata0-slave: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire bus 0 dev 31 func 0 ACPI-1304: *** Error:
SMAP type=02
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wireiOsDerivePciId: bus 0 dev 0 func 0at 0x1880type=02 base=000
ad0: setting PIO4 on ICH5 chip bus 0 dev 31 func 0ANT-LOCKED
ad0: setting UDMA100 on ICH5 chipink0: Links after initial probe:U
ad0: 38162MB <Seagate ST340014A 8.10> at ata0-master UDMA100QsRQ Rtd
usb3: USB revisi
0 11 N 0 3 4 5 7 9
ad0: 78156288 sectors [77536C/16H/63S] 16 sexists;
ex_isa_i
acd0: setting UDMA33 on ICH5 chip 0 3 4 5 7 9 10 11 12 14 15n
acd0: <HL-DT-ST CD-ROM GCR-8482B/1.06> CDROM drive at ata0 as slave initial probe:EHCI version 1.0reeBSD 6.1-BETA1 #0:
Index IRQ Rt
acd0: read 8250KB/s (8250KB/s), 128KB buffer, UDMA33 0 3 4 5 7 9 10 11 12 14 15falo.edu:/usr/obj/us
acd0: Reads: CDR, CDRW, CDDA stream, packetafter initial validation:pci0:
Preloaded e
acd0: Writes:ot/kernel/
In
acd0: Audio: play, 255 volume levelsad_Port at 2c
0 9 N 0
acd0: Mechanism: ejectable tray, unlocked, lock protected)tus reg tes
pci_link1: Links after disable:
uhub4: 8 por
acd0: Medium: CD-ROM 120mm data discef IRQsype=0x00
Boot -v from RELENG_4
ok boot -v
SMAP type=01 base=0000000000000000 len=000000000009f800
SMAP type=02 base=000000000009f800 len=0000000000000800
SMAP type=02 base=00000000000e0000 len=0000000000020000
SMAP type=01 base=0000000000100000 len=000000000f670000
SMAP type=03 base=000000000f770000 len=000000000000a000
SMAP type=04 base=000000000f77a000 len=0000000000006000
SMAP type=02 base=000000000f780000 len=0000000000080000
SMAP type=02 base=000000000f800000 len=0000000000800000
SMAP type=02 base=00000000fec00000 len=0000000000010000
SMAP type=02 base=00000000fee00000 len=0000000000001000
SMAP type=02 base=00000000ff800000 len=0000000000800000
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.11-RELEASE #3: Mon Apr 11 09:39:58
root@builder.uki.ime.reuters.com:/usr/obj/usr/src/sys/REUGEN2
Calibrating clock(s) ... TSC clock: 2793071716 Hz, i8254 clock: 1193213 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz (2793.01-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf29 Stepping = 9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,
MOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory = 259457024 (253376K bytes)
Physical memory chunk(s):
0x000001000 - 0x00009efff, 647168 bytes (158 pages)
0x001121000 - 0x00f767fff, 241463296 bytes (58951 pages)
avail memory = 234819584 (229316K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f6470
bios32: Entry = 0xfd71c (c00fd71c) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0x2dd
pnpbios: Found PnP BIOS data at 0xc00f64e0
pnpbios: Entry = f0000:c256 Rev = 1.0
Other BIOS signatures found:
ACPI: 000f64a0
Preloaded elf kernel "kernel" at 0xc10fa000.
Preloaded mfs_root "/fastbuildfs" at 0xc10fa0a8.
Warning: Pentium 4 CPU: PSE disabled
Pentium Pro MTRR support enabled
md0: Preloaded image </fastbuildfs> 12484608 bytes at 0xc05106cc
Creating DISK md0
Creating DISK md1
md1: Malloc disk
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000fb20
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=25708086)
Using $PIR table, 12 entries at 0xc00fdf00
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
found-> vendor=0x8086, dev=0x2570, revid=0x02
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base ec000000, size 26
found-> vendor=0x8086, dev=0x2572, revid=0x02
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base f0000000, size 27
map[14]: type 1, range 32, base e8000000, size 19
map[18]: type 1, range 32, base 00001800, size 3
found-> vendor=0x8086, dev=0x24d2, revid=0x02
class=0c-03-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[20]: type 1, range 32, base 00001820, size 5
found-> vendor=0x8086, dev=0x24d4, revid=0x02
class=0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0
intpin=b, irq=10
map[20]: type 1, range 32, base 00001840, size 5
found-> vendor=0x8086, dev=0x24d7, revid=0x02
class=0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=c, irq=5
map[20]: type 1, range 32, base 00001860, size 5
found-> vendor=0x8086, dev=0x24de, revid=0x02
class=0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[20]: type 1, range 32, base 00001880,
found-> vendor=0x8086, dev=0x24dd, revid=0x02
class=0c-03-20, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=d, irq=9
map[10]: type 1, range 32, base e8080000, size 10
found-> vendor=0x8086, dev=0x244e, revid=0xc2
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=3 secondarybus=3
found-> vendor=0x8086, dev=0x24d0, revid=0x02
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x24db, revid=0x02
class=01-01-8a, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=255
map[10]: type 1, range 32, base 00000000, size 3
map[14]: type 1, range 32, base 00000000, size 2
map[18]: type 1, range 32, base 00000000, size 3
map[1c]: type 1, range 32, base 00000000, size 2
map[20]: type 1, range 32, base 00001810, size 4
found-> vendor=0x8086, dev=0x24d3, revid=0x02
class=0c-05-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=b, irq=9
map[20]: type 1, range 32, base 000018a0, size 5
found-> vendor=0x8086, dev=0x24d5, revid=0x02
class=04-01-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=b, irq=9
map[10]: type 1, range 32, base 00001c00, size 8
map[14]: type 1, range 32, base 000018c0, size 6
map[18]: type 1, range 32, base e8080c00, size 9
map[1c]: type 1, range 32, base e8080800, size 8
pci0: <PCI bus> on pcib0
agp0: <Intel 82865G (865G GMCH) SVGA controller> port 0x1800-0x1807 mem 0xe80000
00-0xe807ffff,0xf0000000-0xf7ffffff irq 11 at device 2.0 on pci0
agp0: detected 8060k stolen memory
agp0: aperture size is 128M
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0x1820-0x183f irq 11 at
device 29.0 on pci0
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0x1840-0x185f irq 10 at
device 29.1 on pci0
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ums0: IBM Corporation product 0x310b, rev 2.00/1.60, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0x1860-0x187f irq 5 at d
evice 29.2 on pci0
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0x1880-0x189f irq 11 at
device 29.3 on pci0
using shared irq11.
usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self p
pci0: <USB controller> (vendor=0x8086, dev=0x24dd) at 29.7 irq 9
pcib1: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
found-> vendor=0x8086, dev=0x1013, revid=0x00
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base e8100000, size 17
map[18]: type 1, range 32, base 00002000, size 6
pci3: <PCI bus> on pcib1
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.42> port 0x200
mem 0xe8100000-0xe811ffff irq 11 at device 11.0 on pci3
bpf: em0 attached
em0: Speed:N/A Duplex:N/A
isab0: <PCI to ISA bridge (vendor=8086 device=24d0)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 ATA100 controller> port 0x1810-0x181f,0-0x3,0-0x7,0-0x3,0-0
x7 at device 31.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x1810
ata0: mask=03 ostat0=50 ostat2=50
ata0-slave: ATAPI 10 80
ata0-master: ATAPI 00 00
ata0: mask=03 stat0=50 stat1=10
ata0-master: ATA 01 a5
ata0-slave: ATA 01
ata0: devices=03
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x1818
ata1: at 0x170 irq 15 on atapci0
pci0: <unknown card> (vendor=0x8086, dev=0x24d3) at 31.3 irq 9
pci0: <unknown card> (vendor=0x8086, dev=0x24d5) at 31.5 irq 9
ex_isa_identify()
ata-: ata0 exists, using next available unit number
ata-: ata1 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xca800-0xcb7ff,0xcb800-0xcc7ff,0xe0000-0xeffff on
isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata2 failed to probe at port 0x1f0 irq 14 on isa0
ata3 failed to probe at port 0x170 irq 15 on isa0
adv0 failed to probe on isa0
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x330
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x334
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x230
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x234
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x130
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x134
bt0 failed to probe at port 0x134-0x137 on isa0
aha0: status reg test failed ff
aha0: status reg test fai
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0 failed to probe at port 0x134-0x137 on isa0
aic0 failed to probe at port 0x140-0x15f on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x1d0000
psm0: current command byte:0067
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: failed to reset the aux device.
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1: irq maps: 0x41 0x49 0x41 0x41
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on pp
bpf: lp0 attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
cs0: not probed (disabled)
sn0: not probed (disabled)
isa_probe_children: probing PnP devices
BIOS Geometries:
0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: lo0 attached
bpf: ppp0 attached
new masks: bio 68cc60, tty 63009a, net 670
bpf: sl0 attached
bpf: faith0 attached
ata0-slave: ATA identify retries exceeded
ad0: success setting UDMA5 on Intel chip
>How-To-Repeat:
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200606091023.k59ANPfk030746>