Date: Tue, 13 Jan 2009 16:00:09 -0800 From: Nate Lawson <nate@root.org> To: Nenhum_de_Nos <matheus@eternamente.info> Cc: freebsd-acpi@freebsd.org Subject: Re: mini itx from via - acpi issues on 7.1R Message-ID: <496D2B09.6040608@root.org> In-Reply-To: <452cf39aff90a0ec092c5606aa55e975.squirrel@lamneth> References: <452cf39aff90a0ec092c5606aa55e975.squirrel@lamneth>
next in thread | previous in thread | raw e-mail | index | archive | help
Nenhum_de_Nos wrote: > I sent this friday to stable@, but nothing as far. I'm trying this one > now, hope better luck :) > > matheus > > hail, > > I'm running 7.1R (tried 8.0-CURRENT also) on a via mini itx (dmesg bellow) > and if I load acpi module, I have no lan. it appears, I can set IP, even > the led would blink when I ping. but no signal of bits on the other pc > whatsoever. tcpdump sees nothing in both endpoints. if acpi is not loaded, > vr0 works as it should. > > i really think acpi would help this box, on power purposes, so here I am > asking. > > thanks, > > matheus > > ps: should I mail acpi@ with, or instead ? > pci0: <bridge> at device 17.4 (no driver attached) > vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xe600-0xe6ff mem > 0xe8130000-0xe81300ff irq 15 at device 18.0 on pci0 > vr0: Quirks: 0x0 > vr0: Revision: 0x51 > miibus0: <MII bus> on vr0 > ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0 > ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > vr0: Ethernet address: 00:11:85:e3:2a:17 > vr0: [ITHREAD] > > vr0@pci0:0:18:0: class=0x020000 card=0x01021106 chip=0x30651106 rev=0x51 > hdr=0x00 > vendor = 'VIA Technologies Inc' > device = 'VT6102 Rhine II PCI Fast Ethernet Controller||Used by > GERICOM in laptop Webengine Advanced' > class = network > subclass = ethernet Maybe it's a PCI irq routing problem. -- Nate
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?496D2B09.6040608>