Date: Sun, 28 Sep 2014 17:01:50 +0100 From: "Steven Hartland" <killing@multiplay.co.uk> To: "Mike." <the.lists@mgm51.com>, <freebsd-current@freebsd.org> Subject: Re: Looping during boot-up process in FreeBSD-11 current Message-ID: <4821117AE9E7452FB73D452060B1E4CF@multiplay.co.uk> References: <201409281152140359.008FD377@smtp.24cl.home> <201409281153050191.00909A0F@smtp.24cl.home>
next in thread | previous in thread | raw e-mail | index | archive | help
The only recent ATAPI change I recall is 270327, does it still occur
if you revert that?
Regards
Steve
----- Original Message -----
From: "Mike." <the.lists@mgm51.com>
>
>
> I'm starting to look at FreeBSD 11-current to see what's coming soon.
> I have an older notebook that I use for test environments for
> purposes such as this. Unfortunately, the notebook won't boot up
> from the install CD, there's a loop it cannot seem to get out of.
>
>
>
> Details are:
>
> - The install CD was made from this image:
> FreeBSD-11.0-CURRENT-i386-20140918-r271779-disc1
>
> - The dmesg for the notebook is at the end of this message. The
> dmesg was captured with FreeBSD 10.0. In the dmesg, you can see the
> following lines:
>
> (aprobe0:ata1:0:1:0): ATAPI_IDENTIFY. ACB: a1 00 00 00 00 40 00 00 00
> 00 00 00
> (aprobe0:ata1:0:1:0): CAM status: Command timeout
> (aprobe0:ata1:0:1:0): Error 5, Retry was blocked
> run_interrupt_driven_hooks: still waiting after 60 seconds for
> xpt_config
> (aprobe0:ata1:0:1:0): ATAPI_IDENTIFY. ACB: a1 00 00 00 00 40 00 00 00
> 00 00 00
> (aprobe0:ata1:0:1:0): CAM status: Command timeout
> (aprobe0:ata1:0:1:0): Error 5, Retry was blocked
>
>
> which, while slowing down the boot process drastically, still allowed
> the boot process to run to successful completion.
>
>
> - When I try to boot using the FreeBSD 11-current install CD, that
> loop seems to go on ad infinitum, or at least for the 5 minutes until
> I gave up. I cannot post a dmesg from that boot-up because I never
> got to a prompt. However, I did take a couple of pictures of the
> offending screens. They are here:
> http://archive.mgm51.com/cache/fbsd-11-current-01.jpg
> http://archive.mgm51.com/cache/fbsd-11-current-02.jpg
> The first image shows the start of the looping, and the second shows
> the continuation.
>
>
> While this notebook is used only for testing, it is important to me
> in that aspect. How can I get around this looping issue?
>
> Please let me know if there's any additional info you need.
>
> Thanks.
>
>
>
>
>
> And now, the dmesg...
>
> Copyright (c) 1992-2014 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
> 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 10.0-RELEASE-p8 #1 r271323: Wed Sep 10 20:25:45 EDT 2014
> root@a31pf.245l.home:/usr/obj/usr/src/sys/GENERIC i386
> FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610
> CPU: Intel(R) Pentium(R) 4 Mobile CPU 1.70GHz (1698.60-MHz 686-class
> CPU)
> Origin = "GenuineIntel" Id = 0xf24 Family = 0xf Model = 0x2
> Stepping = 4
> Features=0x3febf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,
> MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
> real memory = 1073741824 (1024 MB)
> avail memory = 1029230592 (981 MB)
> kbd1 at kbdmux0
> random: <Software, Yarrow> initialized
> acpi0: <IBM TP-1G> on motherboard
> acpi_ec0: <Embedded Controller: GPE 0x1c, ECDT> port 0x62,0x66 on
> acpi0
> acpi0: Power Button (fixed)
> acpi0: reservation of 0, a0000 (3) failed
> acpi0: reservation of 100000, 3ff00000 (3) failed
> cpu0: <ACPI CPU> on acpi0
> attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
> Timecounter "i8254" frequency 1193182 Hz quality 0
> Event timer "i8254" frequency 1193182 Hz quality 100
> atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
> Event timer "RTC" frequency 32768 Hz quality 0
> Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on
> acpi0
> acpi_lid0: <Control Method Lid Switch> on acpi0
> acpi_button0: <Sleep Button> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> agp0: <Intel 82845 host to AGP bridge> on hostb0
> pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> vgapci0: <VGA-compatible display> port 0x3000-0x30ff mem
> 0xe8000000-0xefffffff,0xd0100000-0xd010ffff irq 11 at device 0.0 on
> pci1
> vgapci0: Boot video device
> uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port
> 0x1800-0x181f irq 11 at device 29.0 on pci0
> usbus0 on uhci0
> uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port
> 0x1820-0x183f irq 11 at device 29.1 on pci0
> usbus1 on uhci1
> uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port
> 0x1840-0x185f irq 11 at device 29.2 on pci0
> usbus2 on uhci2
> pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pci2: <ACPI PCI bus> on pcib2
> cbb0: <RF5C476 PCI-CardBus Bridge> mem 0x50000000-0x50000fff irq 11
> at device 0.0 on pci2
> cardbus0: <CardBus bus> on cbb0
> pccard0: <16-bit PCCard bus> on cbb0
> cbb1: <RF5C476 PCI-CardBus Bridge> mem 0x50100000-0x50100fff irq 11
> at device 0.1 on pci2
> cardbus1: <CardBus bus> on cbb1
> pccard1: <16-bit PCCard bus> on cbb1
> pci2: <serial bus, FireWire> at device 0.2 (no driver attached)
> fxp0: <Intel 82801CAM (ICH3) Pro/100 VE Ethernet> port 0x8000-0x803f
> mem 0xd0200000-0xd0200fff irq 11 at device 8.0 on pci2
> miibus0: <MII bus> on fxp0
> inphy0: <i82562ET 10/100 media interface> PHY 1 on miibus0
> inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto,
> auto-flow
> fxp0: Ethernet address: 00:0e:9b:2c:d3:f6
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel ICH3 UDMA100 controller> port
> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1860-0x186f at device 31.1 on
> pci0
> ata0: <ATA channel> at channel 0 on atapci0
> ata1: <ATA channel> at channel 1 on atapci0
> pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
> pcm0: <Intel ICH3 (82801CA)> port 0x1c00-0x1cff,0x18c0-0x18ff irq 11
> at device 31.5 on pci0
> pcm0: <Analog Devices AD1881A AC97 Codec>
> pci0: <simple comms, generic modem> at device 31.6 (no driver
> attached)
> acpi_tz0: <Thermal Zone> on acpi0
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: [GIANT-LOCKED]
> psm0: model Generic PS/2 mouse, device ID 0
> uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on
> acpi0
> battery0: <ACPI Control Method Battery> on acpi0
> acpi_acad0: <AC Adapter> on acpi0
> pmtimer0 on isa0
> orm0: <ISA Option ROMs> at iomem
> 0xc0000-0xcffff,0xd0000-0xd0fff,0xd1000-0xd1fff,0xdc000-0xdffff,0xe000
> 0-0xeffff pnpid ORM0000 on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
> isa0
> ppc0: parallel port not found.
> acpi_perf0: <ACPI CPU Frequency Control> on cpu0
> p4tcc0: <CPU Frequency Thermal Control> on cpu0
> Timecounters tick every 1.000 msec
> random: unblocking device.
> usbus0: 12Mbps Full Speed USB v1.0
> usbus1: 12Mbps Full Speed USB v1.0
> usbus2: 12Mbps Full Speed USB v1.0
> ugen2.1: <Intel> at usbus2
> uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on
> usbus2
> ugen1.1: <Intel> at usbus1
> uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on
> usbus1
> ugen0.1: <Intel> at usbus0
> uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on
> usbus0
> uhub0: 2 ports with 2 removable, self powered
> uhub1: 2 ports with 2 removable, self powered
> uhub2: 2 ports with 2 removable, self powered
> ath0: <Atheros 5212> irq 11 at device 0.0 on cardbus1
> ath0: AR5212 mac 5.6 RF5112 phy 4.1
> ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0036
> (aprobe0:ata1:0:1:0): ATAPI_IDENTIFY. ACB: a1 00 00 00 00 40 00 00 00
> 00 00 00
> (aprobe0:ata1:0:1:0): CAM status: Command timeout
> (aprobe0:ata1:0:1:0): Error 5, Retry was blocked
> run_interrupt_driven_hooks: still waiting after 60 seconds for
> xpt_config
> (aprobe0:ata1:0:1:0): ATAPI_IDENTIFY. ACB: a1 00 00 00 00 40 00 00 00
> 00 00 00
> (aprobe0:ata1:0:1:0): CAM status: Command timeout
> (aprobe0:ata1:0:1:0): Error 5, Retry was blocked
> ada0 at ata0 bus 0 scbus0 target 0 lun 0
> ada0: <HTS721080G9AT00 MC4OA51A> ATA-6 device
> ada0: Serial Number MPC412Y4G6J1AE
> ada0: 100.000MB/s transfers (UDMA5, PIO 8192bytes)
> ada0: 76319MB (156301488 512 byte sectors: 16H 63S/T 16383C)
> ada0: Previously was known as ad0
> cd0 at ata1 bus 0 scbus1 target 0 lun 0
> cd0: <MATSHITA UJDA720 DVD/CDRW 1.03> Removable CD-ROM SCSI-0 device
> cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
> cd0: Attempt to query device size failed: NOT READY, Medium not
> present - tray closed
> Trying to mount root from ufs:/dev/ada0p2 [rw]...
> wlan0: Ethernet address: 00:04:e2:b6:d4:d6
>
>
>
> _______________________________________________
> freebsd-current@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org"
>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4821117AE9E7452FB73D452060B1E4CF>