Date: Thu, 4 Feb 1999 23:02:37 -0800 (PST) From: Matthew Jacob <mjacob@feral.com> To: The Hermit Hacker <scrappy@hub.org> Cc: freebsd-scsi@FreeBSD.ORG, freebsd-stable@FreeBSD.ORG Subject: Re: CAM problem with 3.0S? Message-ID: <Pine.LNX.4.04.9902042300410.30281-100000@feral-gw> In-Reply-To: <Pine.BSF.4.05.9902050224520.344-300000@thelab.hub.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Hmmm.. The Sony reports 20Mhz (FAST-20) speeds, and you're mixing a wide and narrow bus. They aren't separate busses, and I'd have my doubts about this working well. I don't remember off the top of my head whether the AHA driver reads NVRAM settings, but try and dial down the Ultra rates- it really isn't going to work well in this configuration. On Fri, 5 Feb 1999, The Hermit Hacker wrote: > > Further to my last, slightly more details to work from... > > Attached is from /var/log/messages, basically what gets spewed out when I > type 'tosha -iq'...and dmesg.boot > > A few extra details that I just clued into. One thing has changed > recently, I added a 4 gig, UW drive to the system. > > My controller is an Adaptec 2940 UW...with the two internal buses (one > 68pin, one 50pin?) ... I have both in use...my root drive, and the CD I'm > trying to read from, is on the 50pin..my new 4gig is on the 68pin. I can > access both the root (obviously) and the 4gig drive, just tosha fails on > the CD... > > %tosha -iq > error sending SCSI command: Input/output error > > the kernel is "fresh" as of about 30minute ago or so, figured I should > bring the 3.0S machine up to date before adding more data...makes no > difference... > > Trying to follow things through a little further, I just shut down and > removed the second bus (68pin)...now the CD works again. So, with both > bus's in operation, I can access both hard drives (1 on the 68pin bus, one > on the 50pin bus), but I can't touch the CD on the 50pin bus...if I remove > the 68pin bus/cable, the CD works again... > > Anything else that I should be trying? > > Marc G. Fournier > Systems Administrator @ hub.org > primary: scrappy@hub.org secondary: scrappy@{freebsd|postgresql}.org > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.LNX.4.04.9902042300410.30281-100000>