Date: Sun, 14 Jul 2002 07:42:40 +0900 (JST) From: Ryuichiro Imura <imura@ryu16.org> To: FreeBSD-gnats-submit@FreeBSD.org Subject: conf/40537: add ata card entry to pccard.conf Message-ID: <200207132242.g6DMgeW5023337@skyblue.xt.ryu16.org>
next in thread | raw e-mail | index | archive | help
>Number: 40537 >Category: conf >Synopsis: add ata card entry to pccard.conf >Confidential: no >Severity: non-critical >Priority: low >Responsible: freebsd-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: update >Submitter-Id: current-users >Arrival-Date: Sat Jul 13 15:50:01 PDT 2002 >Closed-Date: >Last-Modified: >Originator: Ryuichiro Imura >Release: FreeBSD 4.5-STABLE i386 >Organization: >Environment: System: FreeBSD skyblue.xt.ryu16.org 4.5-STABLE FreeBSD 4.5-STABLE #9: Tue Apr 30 17:32:48 JST 2002 root@vrs:/usr/obj/usr/src/sys/MN5500 i386 >Description: new ata card entry to pccard.conf >How-To-Repeat: n/a >Fix: This is an entry for the CARRY SDMCA card and the card's CIS. (http://www.carry.com.tw/products/Adapters/sdmca.htm) If no entry in pccard.conf, this card won't work. -- pccard.conf -- card " " "Memory Card Adapter" config 0x1 "ata" ? logstr "SDMCA 4-IN-1 PC Card Adapter" -- pccardc dumpcis -- Configuration data for card in slot 0 Tuple #1, code = 0x1 (Common memory descriptor), length = 4 000: df 4a 01 ff Common memory device information: Device number 1, type Function specific, WPS = ON Speed = 4.0 x 100 ns, Memory block size = 2Kb, 1 units Tuple #2, code = 0x1c (Other conditions for common memory), length = 4 000: 02 d9 01 ff (3V card) Tuple #3, code = 0x18 (JEDEC descr for common memory), length = 2 000: df 01 Tuple #4, code = 0x20 (Manufacturer ID), length = 4 000: 45 00 01 04 PCMCIA ID = 0x45, OEM ID = 0x401 Tuple #5, code = 0x15 (Version 1 info), length = 43 000: 04 01 20 20 20 20 20 20 20 20 20 20 20 20 20 20 010: 20 20 20 20 20 00 4d 65 6d 6f 72 79 20 43 61 72 020: 64 20 41 64 61 70 74 65 72 00 ff Version = 4.1, Manuf = [ ], card vers = [Memory Card Adapter] Tuple #6, code = 0x21 (Functional ID), length = 2 000: 04 01 Fixed disk card - POST initialize Tuple #7, code = 0x22 (Functional EXT), length = 2 000: 01 01 Disk interface: IDE Tuple #8, code = 0x22 (Functional EXT), length = 3 000: 02 0c 0f Disk features: Silicon, Unique, Single Sleep, Standby, Idle, Low power, Tuple #9, code = 0x1a (Configuration map), length = 5 000: 01 03 00 02 0f Reg len = 2, config register addr = 0x200, last config = 0x3 Registers: XXXX---- Tuple #10, code = 0x1b (Configuration entry), length = 8 000: c0 40 a1 01 55 08 00 20 Config index = 0x0(default) Interface byte = 0x40 (memory) +RDY/-BSY active Vcc pwr: Nominal operating supply voltage: 5 x 1V Memory space length = 0x8 Max twin cards = 0 Misc attr: (Power down supported) Tuple #11, code = 0x1b (Configuration entry), length = 6 000: 00 01 21 b5 1e 4d Config index = 0x0 Vcc pwr: Nominal operating supply voltage: 3 x 1V, ext = 0x1e Max current average over 10 ms: 4.5 x 10mA Tuple #12, code = 0x1b (Configuration entry), length = 10 000: c1 41 99 01 55 64 f0 ff ff 20 Config index = 0x1(default) Interface byte = 0x41 (I/O) +RDY/-BSY active Vcc pwr: Nominal operating supply voltage: 5 x 1V Card decodes 4 address lines, full 8/16 Bit I/O IRQ modes: Level, Pulse, Shared IRQs: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Max twin cards = 0 Misc attr: (Power down supported) Tuple #13, code = 0x1b (Configuration entry), length = 6 000: 01 01 21 b5 1e 4d Config index = 0x1 Vcc pwr: Nominal operating supply voltage: 3 x 1V, ext = 0x1e Max current average over 10 ms: 4.5 x 10mA Tuple #14, code = 0x1b (Configuration entry), length = 15 000: c2 41 99 01 55 ea 61 f0 01 07 f6 03 01 ee 20 Config index = 0x2(default) Interface byte = 0x41 (I/O) +RDY/-BSY active Vcc pwr: Nominal operating supply voltage: 5 x 1V Card decodes 10 address lines, full 8/16 Bit I/O I/O address # 1: block start = 0x1f0 block length = 0x8 I/O address # 2: block start = 0x3f6 block length = 0x2 IRQ modes: Level, Pulse, Shared IRQ level = 14 Max twin cards = 0 Misc attr: (Power down supported) Tuple #15, code = 0x1b (Configuration entry), length = 6 000: 02 01 21 b5 1e 4d Config index = 0x2 Vcc pwr: Nominal operating supply voltage: 3 x 1V, ext = 0x1e Max current average over 10 ms: 4.5 x 10mA Tuple #16, code = 0x1b (Configuration entry), length = 15 000: c3 41 99 01 55 ea 61 70 01 07 76 03 01 ee 20 Config index = 0x3(default) Interface byte = 0x41 (I/O) +RDY/-BSY active Vcc pwr: Nominal operating supply voltage: 5 x 1V Card decodes 10 address lines, full 8/16 Bit I/O I/O address # 1: block start = 0x170 block length = 0x8 I/O address # 2: block start = 0x376 block length = 0x2 IRQ modes: Level, Pulse, Shared IRQ level = 14 Max twin cards = 0 Misc attr: (Power down supported) Tuple #17, code = 0x1b (Configuration entry), length = 6 000: 03 01 21 b5 1e 4d Config index = 0x3 Vcc pwr: Nominal operating supply voltage: 3 x 1V, ext = 0x1e Max current average over 10 ms: 4.5 x 10mA Tuple #18, code = 0x14 (No link), length = 0 Tuple #19, code = 0xff (Terminator), length = 0 1 slots found >Release-Note: >Audit-Trail: >Unformatted: To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200207132242.g6DMgeW5023337>