Date: Thu, 24 Apr 2003 16:34:17 -0600 From: segr@shaw.ca To: freebsd-current@freebsd.org Subject: Adaptec Raid 2015S Message-ID: <31e27328e7.328e731e27@shaw.ca>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format. --Boundary_(ID_ww15hQVuabs7YveRkqdTWg) Content-type: text/plain; charset=us-ascii Content-transfer-encoding: 7BIT Content-disposition: inline Running FreeBSD 5.0-RELEASE-p7 and 5.0-CURRENT on a couple Super Micro's with a Zero Raid Controller and I'm trying to get the Adaptec Storage Manager Application so that I can remotely manage my raid controller via their CLI raidutil application. Once I got the compat4x distro installed it would run, only not to find a /dev/device to communicate the hardware too. I'm not too familiar with the new devfs system but how would I go about getting the raidutil application to work or is there another CLI application that can be used to check the status of the drives in the raid array? Attached are the output of /var/run/dmesg.boot and below the output of the error I get from the app. ------------------------- sm1# ./raidutil -L physical osdIOrequest : File /dev/rdptr17 Could Not Be OpenedEngine connect failed: COMPATIBILITY number sm1# ------------------------- The examples included here are from my FreeBSD 5.0-RELEASE-p7 box, but I do have another box that I can update to current. I hope someone here can stear me in the right direction... also, if anyone wants me to do some testing for them on my box running CURRENT, please let me know... here are the specs: http://www.supermicro.com/PRODUCT/SUPERServer/SuperServer6013P-8.htm same configuration as found in the dmesg.boot file attached. Thanks, Stephane Raimbault --Boundary_(ID_ww15hQVuabs7YveRkqdTWg) Content-type: text/plain; NAME=dmesg.boot.txt Content-transfer-encoding: 7BIT Content-disposition: attachment; filename=dmesg.boot.txt sm1# cat /var/run/dmesg.boot Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-RELEASE-p7 #0: Tue Apr 15 11:01:43 MDT 2003 root@sm1.enertiasoft.com:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc0684000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc06840a8. Timecounter "i8254" frequency 1193182 Hz CPU: Pentium 4 (2399.33-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf27 Stepping = 7 Features=0xffffffffbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,<b31>> real memory = 2146959360 (2047 MB) avail memory = 2082975744 (1986 MB) Programming 24 pins in IOAPIC #0 IOAPIC #0 intpin 2 -> irq 0 Programming 24 pins in IOAPIC #1 Programming 24 pins in IOAPIC #2 FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs cpu0 (BSP): apic id: 0, version: 0x00050014, at 0xfee00000 cpu1 (AP): apic id: 6, version: 0x00050014, at 0xfee00000 cpu2 (AP): apic id: 1, version: 0x00050014, at 0xfee00000 cpu3 (AP): apic id: 7, version: 0x00050014, at 0xfee00000 io0 (APIC): apic id: 2, version: 0x00178020, at 0xfec00000 io1 (APIC): apic id: 3, version: 0x00178020, at 0xfec80000 io2 (APIC): apic id: 4, version: 0x00178020, at 0xfec80400 Initializing GEOMetry subsystem Pentium Pro MTRR support enabled npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <PTLTD RSDT > on motherboard ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15 ACPI-0625: *** Info: GPE Block1 defined as GPE16 to GPE31 Using $PIR table, 24 entries at 0xc00fde40 acpi0: power button is handled as a fixed feature programming model. Timecounter "ACPI-fast" frequency 3579545 Hz acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_cpu1: <CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 IOAPIC #0 intpin 16 -> irq 2 IOAPIC #0 intpin 19 -> irq 10 IOAPIC #0 intpin 18 -> irq 11 pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0 pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.HLB_ - AE_NOT_FOUND pci1: <ACPI PCI bus> on pcib1 pci1: <base peripheral, interrupt controller> at device 28.0 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 29.0 on pci1 pci2: <ACPI PCI bus> on pcib2 IOAPIC #2 intpin 6 -> irq 16 IOAPIC #2 intpin 7 -> irq 17 em0: <Intel(R) PRO/1000 Network Connection, Version - 1.4.7> port 0x3000-0x303f mem 0xf8200000-0xf821ffff irq 16 at device 3.0 on pci2 em0: Speed:100 Mbps Duplex:Full em1: <Intel(R) PRO/1000 Network Connection, Version - 1.4.7> port 0x3040-0x307f mem 0xf8220000-0xf823ffff irq 17 at device 3.1 on pci2 em1: Speed:N/A Duplex:N/A pci1: <base peripheral, interrupt controller> at device 30.0 (no driver attached) pcib3: <ACPI PCI-PCI bridge> at device 31.0 on pci1 pci3: <ACPI PCI bus> on pcib3 IOAPIC #1 intpin 6 -> irq 18 asr0: <Adaptec Caching SCSI RAID> mem 0xfc000000-0xfdffffff,0xfb000000-0xfbffffff,0xf8300000-0xf83fffff irq 18 at device 3.0 on pci3 asr0: major=154 asr0: ADAPTEC 2015S FW Rev. 3A0J, 2 channel, 256 CCBs, Protocol I2O uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x2000-0x201f irq 2 at device 29.0 on pci0 usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x2020-0x203f irq 10 at device 29.1 on pci0 usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0x2040-0x205f irq 11 at device 29.2 on pci0 usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci4: <ACPI PCI bus> on pcib4 pci4: <display, VGA> at device 1.0 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH3 ATA100 controller> port 0x2060-0x206f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 mem 0xf8000000-0xf80003ff irq 0 at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_button0: <Power Button> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: failed to get data. psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 orm0: <Option ROMs> at iomem 0xe0000-0xe3fff,0xdc000-0xdffff,0xc9000-0xcefff,0xc8000-0xc8fff,0xc0000-0xc7fff on isa0 pmtimer0 on isa0 ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 APIC_IO: Testing 8254 interrupt delivery APIC_IO: routing 8254 via IOAPIC #0 intpin 2 Timecounters tick every 10.000 msec acpi_cpu: CPU throttling enabled, 8 steps from 100% to 12.5% acd0: CDROM <MATSHITA CR-177> at ata1-master PIO4 ses0 at asr0 bus 0 target 6 lun 0 ses0: <SUPER GEM318 0> Fixed Processor SCSI-2 device ses0: SAF-TE Compliant Device SMP: AP CPU #2 Launched! SMP: AP CPU #1 Launched! SMP: AP CPU #3 Launched! da0 at asr0 bus 0 target 0 lun 0 da0: <ADAPTEC RAID-5 3A0J> Fixed Direct Access SCSI-2 device da0: Tagged Queueing Enabled da0: 70092MB (143548416 512 byte sectors: 255H 63S/T 8935C) Mounting root from ufs:/dev/da0s1a sm1# --Boundary_(ID_ww15hQVuabs7YveRkqdTWg)--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?31e27328e7.328e731e27>