Date: Thu, 28 Aug 2003 21:58:06 +0200 From: Harald Schmalzbauer <h@schmalzbauer.de> To: Nate Lawson <nate@root.org> Cc: current@freebsd.org Subject: Re: Please test: USB floppies Message-ID: <200308282158.13466@harrymail> In-Reply-To: <20030827154324.K33442@root.org> References: <20030825141808.F18481@root.org> <200308260152.08643@harrymail> <20030827154324.K33442@root.org>
next in thread | previous in thread | raw e-mail | index | archive | help
--Boundary-02=_V7lT/SFXt1KotIb Content-Type: text/plain; charset="iso-8859-15" Content-Transfer-Encoding: quoted-printable Content-Description: signed data Content-Disposition: inline On Thursday 28 August 2003 21:35, Nate Lawson wrote: > On Tue, 26 Aug 2003, Harald Schmalzbauer wrote: > > On Monday 25 August 2003 23:19, Nate Lawson wrote: > > > If anyone has a USB floppy drive that is giving them problems, please > > > let me know. > > > > Hello, > > > > this one needs NO_SYNC I think. > > > > Played a bit some time ago but had no luck (I'm no programmer) > > > > port 1 addr 2: full speed, power 500 mA, config 1, NEC USB > > UF000x(0x0040), NEC(0x0409), rev 1.23 *SNIP* > > Have you tried it again since early August? Also, what is the exact > behavior when you try to mount or read it? Mounting, reading writing and umounting is working without errors, just the= se=20 warnings. Here are the one from today's world: umass0: NEC NEC USB UF000x, rev 1.10/1.23, addr 4 (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 0 0 0 24 0=20 (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition (probe0:umass-sim0:0:0:0): UNIT ATTENTION asc:29,0 (probe0:umass-sim0:0:0:0): Power on, reset, or bus device reset occurred (probe0:umass-sim0:0:0:0): Retrying Command (per Sense Data) da0 at umass-sim0 bus 0 target 0 lun 0 da0: <NEC USB UF000x 1.23> Removable Direct Access SCSI-0 device=20 da0: 1.000MB/s transfers da0: 1MB (2880 512 byte sectors: 64H 32S/T 1C) umass0: Unsupported UFI command 0x35 (da0:umass-sim0:0:0:0): Synchronize cache failed, status =3D=3D 0x6, scsi s= tatus=20 =3D=3D 0x0 umass0: Unsupported UFI command 0x35 (da0:umass-sim0:0:0:0): Synchronize cache failed, status =3D=3D 0x6, scsi s= tatus=20 =3D=3D 0x0 umass0: Unsupported UFI command 0x35 (da0:umass-sim0:0:0:0): Synchronize cache failed, status =3D=3D 0x6, scsi s= tatus=20 =3D=3D 0x0 umass0: Unsupported UFI command 0x35 (da0:umass-sim0:0:0:0): Synchronize cache failed, status =3D=3D 0x6, scsi s= tatus=20 =3D=3D 0x0 umass0: Unsupported UFI command 0x35 (da0:umass-sim0:0:0:0): Synchronize cache failed, status =3D=3D 0x6, scsi s= tatus=20 =3D=3D 0x0 (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0=20 (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI Status: Check Condition (da0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0 (da0:umass-sim0:0:0:0): Not ready to ready change, medium may have changed (da0:umass-sim0:0:0:0): Retrying Command (per Sense Data) umass0: Unsupported UFI command 0x35 (da0:umass-sim0:0:0:0): Synchronize cache failed, status =3D=3D 0x6, scsi s= tatus=20 =3D=3D 0x0 umass0: Unsupported UFI command 0x35 (da0:umass-sim0:0:0:0): Synchronize cache failed, status =3D=3D 0x6, scsi s= tatus=20 =3D=3D 0x0 umass0: Unsupported UFI command 0x35 (da0:umass-sim0:0:0:0): Synchronize cache failed, status =3D=3D 0x6, scsi s= tatus=20 =3D=3D 0x0 cale:/mnt#=20 Thanks, =2DHarry > > -Nate --Boundary-02=_V7lT/SFXt1KotIb Content-Type: application/pgp-signature Content-Description: signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (FreeBSD) iD8DBQA/Tl7VBylq0S4AzzwRAjkxAJ40p7UCg5u+UnlwRaEmqpqLlea6MQCeNvez qCWPcl4W4Bpk6aNqpIz6xUQ= =Twwg -----END PGP SIGNATURE----- --Boundary-02=_V7lT/SFXt1KotIb--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200308282158.13466>