Date: Tue, 27 Oct 1998 10:03:15 -0600 From: jumpmaster <jumpmaster@citrine.cyberstation.net> To: hardware@FreeBSD.ORG Subject: Can you help? Message-ID: <3635EEC3.CAAAB53D@cst.net>
next in thread | raw e-mail | index | archive | help
Sirs,
I have installed FreeBSD 2.2.7 via FTP on my system. I inserted the
boot floppy and the intallation program found my network interface just
fine. It is a PCI NIC built into the MB. The interface was shown as
lnc1. I was able for plug in my settings and download very easily.
Now when I boot from the kernel it installed on mh HD the network
interface is not found. I get the message:
ifconfig: interface lnc1 does not exist
If I run /stand/sysinstall to try to reconfigure the network interface
it does not give me the option to configure an ethernet connection.
Here is dmesg -v I get when booting from the HD.
Copyright (c) 1992-1998 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 2.2.7-19981020-SNAP #0: Tue Oct 20 18:52:06 GMT 1998
root@usw3.freebsd.org:/usr/src/sys/compile/GENERIC
Calibrating clock(s) ... i8254 clock: 1193224 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
CPU: i486 DX2 Write-Back Enhanced (486-class CPU)
Origin = "GenuineIntel" Id = 0x470 Stepping=0
Features=0xb<FPU,VME,PSE>
real memory = 16777216 (16384K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x0027b000 - 0x00ffdfff, 14168064 bytes (3459 pages)
avail memory = 14282752 (13948K bytes)
DPT: RAID Manager driver, Version 1.0.5
pcibus_setup(1): mode 1 addr port (0x0cf8) is 0x00000000
pcibus_setup(1a): mode1res=0x00000000 (0x80000000)
pcibus_setup(1b): mode1res=0x80000000 (0xff000001)
pcibus_check: device 0 is there (id=20000e11)
Probing for devices on PCI bus 0:
configuration mode 1 allows 32 devices.
DPT: PCI SCSI HBA Driver, version 1.4.3
pci0:0: Compaq, device=0x2000, class=old (misc) int I irq 72 [no
driver assigned]
map(10): mem32(0021c3f0)
map(14): mem32(0021c3f0)
map(18): mem32(0021c3f0)
map(1c): mem32(0021c3f0)
map(20): io(20000e10)
vga0 <VGA-compatible display device> rev 142 int a irq 11 on pci0:10:0
mapreg[10] type=0 addr=40000000 size=1000000.
lnc1 <PCNet/PCI Ethernet adapter> rev 2 int a irq 11 on pci0:11:0
mapreg[10] type=1 addr=00001000 size=0020.
reg16: ioaddr=0x1000 size=0x20
chip0 <generic PCI bridge (vendor=0e11 device=0002 subclass=1)> rev 2 on
pci0:15:0
pci0: uses 16777216 bytes of memory from 40000000 upto 40ffffff.
pci0: uses 32 bytes of I/O space from 1000 upto 101f.
Probing for devices on the ISA bus:
sc0: the current keyboard controller command byte 0065
kbdio: DIAGNOSE status:0055
kbdio: TEST_KBD_PORT status:0000
kbdio: RESET_KBD return code:00fa
kbdio: RESET_KBD status:00aa
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: BIOS video mode:3
sc0: VGA registers upon power-up
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c ae 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: video mode:24
sc0: VGA registers in BIOS for mode:24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c ae 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: VGA registers to be used for mode:24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c ae 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: rows_offset:1
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0: disabled, not probed.
fe0: disabled, not probed.
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: irq maps: 0x1 0x1 0x1 0x1
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 not found at 0x2f8
sio2: disabled, not probed.
sio3: disabled, not probed.
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
lpt1 not found at 0xffffffff
mse0: disabled, not probed.
psm0: disabled, not probed.
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <Conner Peripherals 540MB - CFS541A>
wd0: 515MB (1056384 sectors), 1048 cyls, 16 heads, 63 S/T, 512 B/S
wdc1 not found at 0x170
bt0: disabled, not probed.
uha0: disabled, not probed.
aha0: disabled, not probed.
aic0: disabled, not probed.
nca0: disabled, not probed.
nca1: disabled, not probed.
sea0: disabled, not probed.
wt0: disabled, not probed.
mcd0: disabled, not probed.
matcdc0: disabled, not probed.
scd0: disabled, not probed.
ie0: disabled, not probed.
ep0: disabled, not probed.
ex0: disabled, not probed.
le0: disabled, not probed.
lnc0: disabled, not probed.
ze0: disabled, not probed.
zp0: disabled, not probed.
cs0: disabled, not probed.
npx0 flags 0x1 on motherboard
npx0: INT 16 interface
apm0: disabled, not probed.
imasks: bio c0084040, tty c0070092, net c0070092
BIOS Geometries:
0:02091f3f 0..521=522 cylinders, 0..31=32 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
new masks: bio c0084040, tty c0070092, net c0070092
Considering FFS root f/s.
wd0s1: type 0xa5, start 0, end = 1056383, size 1056384
wd0s1: C/H/S end 65/192/63 (802493) != end 1056383: invalid
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hardware" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3635EEC3.CAAAB53D>