Date: Sun, 16 Oct 2011 21:34:21 GMT From: Rene Ladan <rene@FreeBSD.org> To: Perforce Change Reviews <perforce@FreeBSD.org> Subject: PERFORCE change 200300 for review Message-ID: <201110162134.p9GLYL6x029539@skunkworks.freebsd.org>
next in thread | raw e-mail | index | archive | help
http://p4web.freebsd.org/@@200300?ac=10 Change 200300 by rene@rene_acer on 2011/10/16 21:33:30 IFC Affected files ... .. //depot/projects/docproj_nl/en_US.ISO8859-1/articles/committers-guide/article.sgml#44 integrate .. //depot/projects/docproj_nl/en_US.ISO8859-1/articles/contributors/contrib.additional.sgml#108 integrate .. //depot/projects/docproj_nl/en_US.ISO8859-1/articles/ldap-auth/article.sgml#4 integrate .. //depot/projects/docproj_nl/en_US.ISO8859-1/books/handbook/Makefile#7 integrate .. //depot/projects/docproj_nl/en_US.ISO8859-1/books/handbook/bsdinstall/chapter.sgml#2 integrate .. //depot/projects/docproj_nl/en_US.ISO8859-1/books/handbook/mirrors/chapter.sgml#40 integrate .. //depot/projects/docproj_nl/en_US.ISO8859-1/books/handbook/network-servers/chapter.sgml#30 integrate .. //depot/projects/docproj_nl/en_US.ISO8859-1/books/handbook/preface/preface.sgml#9 integrate .. //depot/projects/docproj_nl/en_US.ISO8859-1/books/porters-handbook/book.sgml#113 integrate .. //depot/projects/docproj_nl/share/images/books/handbook/bsdinstall/bsdinstall-configure-network-interface-ipv6-static.png#2 integrate .. //depot/projects/docproj_nl/share/images/books/handbook/bsdinstall/bsdinstall-configure-network-ipv4-dns.png#2 integrate .. //depot/projects/docproj_nl/share/images/books/handbook/bsdinstall/bsdinstall-configure-wireless-accesspoints.png#1 branch .. //depot/projects/docproj_nl/share/images/books/handbook/bsdinstall/bsdinstall-configure-wireless-scan.png#1 branch .. //depot/projects/docproj_nl/share/images/books/handbook/bsdinstall/bsdinstall-configure-wireless-wpa2setup.png#1 branch .. //depot/projects/docproj_nl/share/sgml/freebsd.ent#25 integrate .. //depot/projects/docproj_nl/www/en/donations/donors.sgml#43 integrate .. //depot/projects/docproj_nl/www/en/internal/developer.sgml#3 integrate Differences ... ==== //depot/projects/docproj_nl/en_US.ISO8859-1/articles/committers-guide/article.sgml#44 (text+ko) ==== @@ -9,7 +9,7 @@ <corpauthor>The &os; Documentation Project</corpauthor> - <pubdate>$FreeBSD: doc/en_US.ISO8859-1/articles/committers-guide/article.sgml,v 1.303 2011/09/11 18:04:15 gjb Exp $</pubdate> + <pubdate>$FreeBSD: doc/en_US.ISO8859-1/articles/committers-guide/article.sgml,v 1.304 2011/10/15 20:25:24 jmg Exp $</pubdate> <copyright> <year>1999</year> @@ -304,9 +304,10 @@ <application>CVS</application> but in Subversion. The official and exported trees are not necessarily equal.</para> - <note><para>Note that the <literal>www</literal> module containing sources - for the <ulink url="http://www.FreeBSD.org">FreeBSD website</ulink> is - contained within the <literal>doc</literal> repository.</para></note> + <note><para>Note that the sources for the + <ulink url="http://www.FreeBSD.org">FreeBSD website</ulink> are + contained within the <literal>www</literal> module of the + <literal>doc</literal> repository.</para></note> <para>The CVS repositories are hosted on the repository machines. Currently, each of the repositories above reside on the same physical ==== //depot/projects/docproj_nl/en_US.ISO8859-1/articles/contributors/contrib.additional.sgml#108 (text+ko) ==== @@ -1,4 +1,4 @@ -<!-- $FreeBSD: doc/en_US.ISO8859-1/articles/contributors/contrib.additional.sgml,v 1.1025 2011/10/03 19:40:57 pawel Exp $ --> +<!-- $FreeBSD: doc/en_US.ISO8859-1/articles/contributors/contrib.additional.sgml,v 1.1027 2011/10/13 23:27:39 glarkin Exp $ --> <!-- NOTE TO COMMITTERS: Contributors lists are sorted in alphabetical order by first name. @@ -9821,6 +9821,11 @@ </listitem> <listitem> + <para>Tim Niemueller + <email>tim@niemueller.de</email></para> + </listitem> + + <listitem> <para>Tim Pozar <email>pozar@lns.com</email></para> </listitem> @@ -9851,6 +9856,11 @@ </listitem> <listitem> + <para>Timothy Beyer + <email>beyert@cs.ucr.edu</email></para> + </listitem> + + <listitem> <para>Timothy Bourke <email>timbob@bigpond.com</email></para> </listitem> ==== //depot/projects/docproj_nl/en_US.ISO8859-1/articles/ldap-auth/article.sgml#4 (text+ko) ==== @@ -17,7 +17,7 @@ </author> </authorgroup> - <pubdate>$FreeBSD: doc/en_US.ISO8859-1/articles/ldap-auth/article.sgml,v 1.3 2010/07/31 11:06:18 pgj Exp $</pubdate> + <pubdate>$FreeBSD: doc/en_US.ISO8859-1/articles/ldap-auth/article.sgml,v 1.4 2011/10/13 17:04:17 bcr Exp $</pubdate> <copyright> <year>2007</year> @@ -80,9 +80,9 @@ concrete administration is <application>OpenLDAP</application>-specific. There are several server versions in ports, for example <filename - role="package">net/openldap23-server</filename>. Client servers + role="package">net/openldap24-server</filename>. Client servers will need the corresponding <filename - role="package">net/openldap23-client</filename> libraries.</para> + role="package">net/openldap24-client</filename> libraries.</para> <para>There are (basically) two areas of the LDAP service which need configuration. The first is setting up a server to receive @@ -239,7 +239,7 @@ <title>Configuring the Client</title> <para>Install the <filename - role="package">net/openldap23-client</filename> port for the + role="package">net/openldap24-client</filename> port for the <application>OpenLDAP</application> libraries. The client machines will always have <application>OpenLDAP</application> libraries since that is all <filename @@ -380,7 +380,7 @@ <application>OpenLDAP</application> libraries from <xref linkend="ldap-connect-client">, but if you are installing several client machines you will need to install <filename - role="package">net/openldap23-client</filename> on each of + role="package">net/openldap24-client</filename> on each of them.</para> <para>&os; requires two ports to be installed to authenticate ==== //depot/projects/docproj_nl/en_US.ISO8859-1/books/handbook/Makefile#7 (text+ko) ==== @@ -1,5 +1,5 @@ # -# $FreeBSD: doc/en_US.ISO8859-1/books/handbook/Makefile,v 1.116 2011/10/08 16:44:25 wblock Exp $ +# $FreeBSD: doc/en_US.ISO8859-1/books/handbook/Makefile,v 1.117 2011/10/12 04:00:20 wblock Exp $ # # Build the FreeBSD Handbook. # @@ -67,6 +67,9 @@ IMAGES_EN+= bsdinstall/bsdinstall-configure-network-interface-slaac.png IMAGES_EN+= bsdinstall/bsdinstall-configure-network-interface.png IMAGES_EN+= bsdinstall/bsdinstall-configure-network-ipv4-dns.png +IMAGES_EN+= bsdinstall/bsdinstall-configure-wireless-accesspoints.png +IMAGES_EN+= bsdinstall/bsdinstall-configure-wireless-scan.png +IMAGES_EN+= bsdinstall/bsdinstall-configure-wireless-wpa2setup.png IMAGES_EN+= bsdinstall/bsdinstall-distfile-extracting.png IMAGES_EN+= bsdinstall/bsdinstall-distfile-fetching.png IMAGES_EN+= bsdinstall/bsdinstall-distfile-verifying.png ==== //depot/projects/docproj_nl/en_US.ISO8859-1/books/handbook/bsdinstall/chapter.sgml#2 (text+ko) ==== @@ -1,7 +1,7 @@ <!-- The FreeBSD Documentation Project - $FreeBSD: doc/en_US.ISO8859-1/books/handbook/bsdinstall/chapter.sgml,v 1.9 2011/10/10 17:29:26 gjb Exp $ + $FreeBSD: doc/en_US.ISO8859-1/books/handbook/bsdinstall/chapter.sgml,v 1.16 2011/10/13 23:43:52 manolis Exp $ --> <chapter id="bsdinstall"> @@ -400,7 +400,7 @@ does not have copies of the installation files, but downloads them from the network during an install. The bootonly install CD is consequently much smaller, and reduces bandwidth usage - during the install by only downloaded required files.</para> + during the install by only downloading required files.</para> <para>Copies of &os; installation media are available at the <ulink url="&url.base;/releases/index.html">&os; web @@ -426,11 +426,8 @@ <para>The memory stick image can be downloaded from the <filename class="directory">ISO-IMAGES/</filename> directory from - <literal>ftp://ftp.FreeBSD.org/pub/FreeBSD/releases/<replaceable>; - arch</replaceable>/<replaceable>arch</replaceable>/ISO-IMAGES/ - <replaceable>version</replaceable>/&os;-9.0-RELEASE-<replaceable> - arch</replaceable>-memstick.img</literal>. Replace - <replaceable>arch</replaceable> and + <literal>ftp://ftp.FreeBSD.org/pub/FreeBSD/releases/<replaceable>arch</replaceable>/<replaceable>arch</replaceable>/ISO-IMAGES/<replaceable>version</replaceable>/&os;-9.0-RELEASE-<replaceable>arch</replaceable>-memstick.img</literal>. + Replace <replaceable>arch</replaceable> and <replaceable>version</replaceable> with the architecture and the version number which you want to install, respectively. For example, the memory stick @@ -508,7 +505,7 @@ <computeroutput>Device</computeroutput> is the drive with the memory stick. Click the folder icon and select the image to be written to the memory stick. Click - <guibutton>[ Save </guibutton> to accept the + <guibutton>[ Save ]</guibutton> to accept the image file name. Verify that everything is correct, and that no folders on the memory stick are open in other windows. When everything is ready, click @@ -629,7 +626,7 @@ Loading /boot/defaults/loader.conf /boot/kernel/kernel text=0x64daa0 data=0xa4e80+0xa9e40 syms=[0x4+0x6cac0+0x4+0x88e9d] \</screen> - + </step> <step> <para>The &os; boot loader is displayed:</para> @@ -915,7 +912,7 @@ probing, you will see <xref linkend="bsdinstall-choose-mode">. The install media can be used in three ways: to install &os;, as a "live CD", or to simply access a &os; shell. Use the - arrow key to choose an option, and <keycap>Enter</keycap> to + arrow keys to choose an option, and <keycap>Enter</keycap> to select.</para> <figure id="bsdinstall-choose-mode"> @@ -1149,7 +1146,7 @@ </figure> <para>The entire disk can be allocated to &os;, or just a portion - of it. If <guibutton>[ Entire Disk ]</guibutton> is + of it. If <guibutton>[ Entire Disk ]</guibutton> is chosen, a general partition layout filling the whole disk is created. Selecting <guibutton>[ Partition ]</guibutton> creates a @@ -1271,6 +1268,7 @@ UltraSPARC computers.</entry> </row> </tbody> + </tgroup> </table> <para>After the partitioning scheme has been selected and created, @@ -1488,6 +1486,79 @@ </mediaobject> </figure> + <sect3 id="bsdinstall-configure-net-wireless"> + <title>Configuring a Wireless Network Interface</title> + + <para>If a wireless network interface is chosen, wireless + identification and security parameters must be entered to + allow it to connect to the network.</para> + + <para>Wireless networks are identified by a Service Set + Identifier, or <acronym role="Service Set Identifier"> + SSID</acronym>. The <acronym role="Service Set + Identifier">SSID</acronym> is a short, unique name given to + each network.</para> + + <para>Most wireless networks encrypt transmitted data to protect + information from unauthorized viewing. <acronym role="Wi-Fi + Protected Access II">WPA2</acronym> encryption is strongly + recommended. Older encryption types, like <acronym role="Wired + Equivalent Privacy">WEP</acronym>, offer very little + security.</para> + + <para>The first step in connecting to a wireless network is to + scan for wireless access points.</para> + + <figure id="bsdinstall-wireless-scan"> + <title>Scanning for Wireless Access Points</title> + <mediaobject> + <imageobject> + <imagedata fileref="bsdinstall/bsdinstall-configure-wireless-scan" format="PNG"> + </imageobject> + </mediaobject> + </figure> + + <para><acronym role="Service Set Identifiers">SSIDs</acronym> + found during the scan are listed, followed by a description of + the encryption types available for that network. If the + desired <acronym role="Service Set Identifier">SSID</acronym> + doesn't appear in the list, select + <guibutton>[ Rescan ]</guibutton> to scan again. If + the desired network still does not appear, check for problems + with antenna connections or try moving the computer closer to + the access point. Rescan after each change is made.</para> + + <figure id="bsdinstall-wireless-accesspoints"> + <title>Choosing A Wireless Network</title> + <mediaobject> + <imageobject> + <imagedata fileref="bsdinstall/bsdinstall-configure-wireless-accesspoints" format="PNG"> + </imageobject> + </mediaobject> + </figure> + + <para>The encryption information for connecting to the selected + wireless network is entered after selecting the network. With + <acronym role="Wi-Fi Protected Access II">WPA2</acronym>, only + a password (also known as the Pre-Shared Key, or <acronym + role="Pre-Shared Key">PSK</acronym>) is needed. Characters + typed into the input box are shown as asterisks for + security.</para> + + <figure id="bsdinstall-wireless-wpa2"> + <title>WPA2 Setup</title> + <mediaobject> + <imageobject> + <imagedata fileref="bsdinstall/bsdinstall-configure-wireless-wpa2setup" format="PNG"> + </imageobject> + </mediaobject> + </figure> + + <para>Network configuration continues after selection of the + wireless network and entry of the connection + information.</para> + </sect3> + <sect3 id="bsdinstall-ipv4"> <title>Configuring IPv4 Networking</title> @@ -2022,7 +2093,7 @@ </figure> <para>If further configuration or special setup is needed, - selecting <guibutton>[ Live CD ]</guibutton> will boot + selecting <guibutton>[ Live CD ]</guibutton> will boot the install media into Live CD mode.</para> <para>When the installation is complete, select ==== //depot/projects/docproj_nl/en_US.ISO8859-1/books/handbook/mirrors/chapter.sgml#40 (text+ko) ==== @@ -1,7 +1,7 @@ <!-- The FreeBSD Documentation Project - $FreeBSD: doc/en_US.ISO8859-1/books/handbook/mirrors/chapter.sgml,v 1.500 2011/09/10 01:33:20 gjb Exp $ + $FreeBSD: doc/en_US.ISO8859-1/books/handbook/mirrors/chapter.sgml,v 1.502 2011/10/14 18:16:25 blackend Exp $ --> <appendix id="mirrors"> @@ -2402,6 +2402,15 @@ </varlistentry> <varlistentry> + <term>RELENG_9</term> + + <listitem> + <para>The line of development for &os;-9.X, also known + as &os; 9-STABLE</para> + </listitem> + </varlistentry> + + <varlistentry> <term>RELENG_8</term> <listitem> ==== //depot/projects/docproj_nl/en_US.ISO8859-1/books/handbook/network-servers/chapter.sgml#30 (text+ko) ==== @@ -1,7 +1,7 @@ <!-- The FreeBSD Documentation Project - $FreeBSD: doc/en_US.ISO8859-1/books/handbook/network-servers/chapter.sgml,v 1.136 2011/07/24 10:08:00 rene Exp $ + $FreeBSD: doc/en_US.ISO8859-1/books/handbook/network-servers/chapter.sgml,v 1.137 2011/10/16 17:28:18 wblock Exp $ --> <chapter id="network-servers"> @@ -2645,22 +2645,44 @@ </note> </listitem> <listitem> - <para>Edit your <filename>/etc/rc.conf</filename> to - include the following:</para> + <para>By default, DHCP configuration on &os; runs in the + background, or <firstterm>asynchronously</firstterm>. + Other startup scripts continue to run while DHCP + completes, speeding up system startup.</para> + + <para>Background DHCP works well when the DHCP server + responds quickly to requests and the DHCP configuration + process goes quickly. However, DHCP may take a long time + to complete on some systems. If network services attempt + to run before DHCP has completed, they will fail. Using + DHCP in <firstterm>synchronous</firstterm> mode prevents + the problem, pausing startup until DHCP configuration has + completed.</para> + + <para>To connect to a DHCP server in the background while + other startup continues (asynchronous mode), use the + <quote><literal>DHCP</literal></quote> value in + <filename>/etc/rc.conf</filename>:</para> + + <programlisting>ifconfig_<replaceable>fxp0</replaceable>="DHCP"</programlisting> + + <para>To pause startup while DHCP completes, use synchronous + mode with the <quote><literal>SYNCDHCP</literal></quote> + value:</para> - <programlisting>ifconfig_fxp0="DHCP"</programlisting> + <programlisting>ifconfig_<replaceable>fxp0</replaceable>="SYNCDHCP"</programlisting> <note> - <para>Be sure to replace <literal>fxp0</literal> with the - designation for the interface that you wish to dynamically - configure, as described in + <para>Replace the <replaceable>fxp0</replaceable> shown in + these examples with the name of the interface to be + dynamically configured, as described in <xref linkend="config-network-setup">.</para> </note> <para>If you are using a different location for <command>dhclient</command>, or if you wish to pass additional - flags to <command>dhclient</command>, also include the - following (editing as necessary):</para> + flags to <command>dhclient</command>, also include + (editing as necessary):</para> <programlisting>dhclient_program="/sbin/dhclient" dhclient_flags=""</programlisting> ==== //depot/projects/docproj_nl/en_US.ISO8859-1/books/handbook/preface/preface.sgml#9 (text+ko) ==== @@ -1,5 +1,5 @@ <!-- - $FreeBSD: doc/en_US.ISO8859-1/books/handbook/preface/preface.sgml,v 1.48 2010/12/24 18:08:59 ryusuke Exp $ + $FreeBSD: doc/en_US.ISO8859-1/books/handbook/preface/preface.sgml,v 1.50 2011/10/11 23:15:41 gjb Exp $ --> <preface id="book-preface"> @@ -57,6 +57,14 @@ been added with information about installing &os; on virtualization software.</para> </listitem> + + <listitem> + <para><xref linkend="bsdinstall">, Installing + &os; 9.<replaceable>x</replaceable> and Later, has been + added to cover installation of &os; using the new + installation utility, + <application>bsdinstall</application>.</para> + </listitem> </itemizedlist> <bridgehead id="preface-changes-from2" renderas=sect1>Changes from the @@ -274,11 +282,23 @@ </listitem> </varlistentry> <varlistentry> - <term><emphasis><xref linkend="install">, Installation</emphasis></term> + <term><emphasis><xref linkend="install">, Installation of + &os; 8.<replaceable>x</replaceable> and Earlier</emphasis></term> + <listitem> + <para>Walks a user through the entire installation process of + &os; 8.<replaceable>x</replaceable> and earlier using + <application>sysinstall</application>. Some advanced installation + topics, such as installing through a serial console, are also + covered.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><emphasis><xref linkend="bsdinstall">, Installation of + &os; 9.<replaceable>x</replaceable> and Later</emphasis></term> <listitem> - <para>Walks a user through the entire installation process. - Some advanced installation topics, such as installing through - a serial console, are also covered.</para> + <para>Walks a user through the entire installation process of + &os; 9.<replaceable>x</replaceable> and later using + <application>bsdinstall</application>.</para> </listitem> </varlistentry> <varlistentry> ==== //depot/projects/docproj_nl/en_US.ISO8859-1/books/porters-handbook/book.sgml#113 (text+ko) ==== @@ -1,7 +1,7 @@ <!-- The FreeBSD Documentation Project - $FreeBSD: doc/en_US.ISO8859-1/books/porters-handbook/book.sgml,v 1.1117 2011/09/29 07:37:09 erwin Exp $ + $FreeBSD: doc/en_US.ISO8859-1/books/porters-handbook/book.sgml,v 1.1118 2011/10/13 14:50:03 brueffer Exp $ --> <!DOCTYPE BOOK PUBLIC "-//FreeBSD//DTD DocBook V4.1-Based Extension//EN" [ @@ -14311,11 +14311,39 @@ 4.5.</entry> </row> <row> + <entry>900040</entry> + <entry>July 19, 2011</entry> + <entry>Increase default MAXCPU for FreeBSD to 64 on amd64 and ia64 and to 128 for XLP (mips). + </entry> + </row> + <row> <entry>900041</entry> <entry>August 13, 2011</entry> <entry>9.0-CURRENT after the implementation of Capsicum capabilities; fget(9) gains a rights argument.</entry> </row> + <row> + <entry>900042</entry> + <entry>August 28, 2011</entry> + <entry>Bump shared libraries' version numbers for libraries + whose ABI has changed in preparation for 9.0.</entry> + </row> + <row> + <entry>900043</entry> + <entry>September 2, 2011</entry> + <entry>Add automatic detection of USB mass storage devices + which do not support the no synchronize cache SCSI command.</entry> + </row> + <row> + <entry>900044</entry> + <entry>September 10, 2011</entry> + <entry>Re-factor auto-quirk.</entry> + </row> + <row> + <entry>900045</entry> + <entry>Oct 13, 2011</entry> + <entry>All non-compatibility system call entry points have been prefixed with sys_.</entry> + </row> </tbody> </tgroup> </table> ==== //depot/projects/docproj_nl/share/images/books/handbook/bsdinstall/bsdinstall-configure-network-interface-ipv6-static.png#2 (text+ko) ==== @@ -1,23 +1,20 @@ PNG --9-"-nm \^_yqJ;7I_\|mK?&p>->,xn"E)R蓋--\2:2۴O;탎T'PO -Lח&>Wt()5pFG{Wp ӳ/_v , AHƴhm^xk<ed奭շ1SFѰ5 -FicOŎ@˛Hѩ?_8e ^Qlj?flFz):+^8Dnv+t-4bܖiꈇڙci< GGUiYꖯ1Y~a,nw -&R a-\ͳFٹ5v1 'd8l 7epxxC-M3z*a< ~U>8lҏ"[Jy>8j鈚a}8j|7xAd|禦hvs-biKMQ0w)Xa)3O)[SZޢS+%zc|l ^+ ]MР?}_?2f5p4q6tjٚzNm sݱg_KޫpN$nVVc砐 mRs ~iju54tʧ}ʌ>[?_WR D49rv״hN96rͩd,8FkkZ:-e{ Vobj$ؼM<ZĦ`DlKeee ^VqeFv( in@oҷRr>-4b7>MGqbpw`d`)ܮwCa<~hai<0hvm J oK˪^G#>S~VK RewEA 3 -n{wAKOiNx<JAfΞmMI (8w|W^vl(ʪ˒9o{LR .|0* WTm U9/`&KK WJM)P0߬Z/~0Geoi4r6oa W:CPG<hDRQ zVkտu A ﯠhZ2vebMZvAÑ S*y5b?A]g -ǞaWm؊f_-]zΉdm h *~[QCWmMS]?rYU 4zCM+6g7784 TƯRD(87XyQ,-Ak(,F9WOh#Ft - u-~yl=?np-ьHo74`n]p -V} g, K g[٩$_hq xyEWj -Rk RZ /a3~oA[UrPøic:üĭ -Vcӆ.FOw}|Wj8R}YK<j0S;5,P %e p̺p0<uӳS]2f5mʫF0fnQ mRilOv j18&'8H8l3MV'yaAєvh+_L?LM5<9h^> [7kE2GKRfo#-lE,^Xݶ*܇*Wpըs{od(^Ħe4`2aP5 fWT< -Ԯ6 O̍/f'\cvHl״KdKTfvl ]Ôċzǭs |Jhz O80m-T\ No newline at end of file +++ÒaZq+3+ kʷ~kmSV5T 0 >x4s,^Y d:ҥvP*F"C[qI)ᢴh }~~78p3Q 4W8Y4PR(aaW>4Vk><l NHط1y瘿>Q(h2Cv6& ?wp=\U m#$p̏?3HQۢq~fŲ +ǧիHQE_0j le{+d:)ÛʺRyӆjy }cw:C*'F;a43h<_[:62*Sƙ &j]+/άbk~4(\a"4xrGN7τXV|#Z~![Ew-ڇ0mlΥ3JWeK5l|:6+=d]gVWjUZ^4VfZ0}e՛گ mUh5*UTS L^7ᘎћYE<M>s +nb_ +y;d7mE˥ZW~//+LZT]m-~njէxU7 su sA2yS) +eֶi#- =ƙ $9E̝Fէ֡U_~ej +ZWt6+/m;FмA}чS qtiT1EcA'd z:WGW]52+\<`ɴuEUm5occdDff 9Ej䋀.hFtI,4]Y [Fwyac"lqyT~i#G-pw)Y^lT5b2I] u[i;ݖ,^Yl۴pG74J'R0i&cx.UYMsj4Yɼ~-w$_/_.2]Y ؿ_|d[TVQw'wavRf$̃N:9zZ]^ I~ Ntks|5ǃ <PAɕme'fC*+zfЖ+ +^ + Go?ؘ +~5ߍUH"E^hQZטv;n6++p+ R.N S?szStJ1y |<\ No newline at end of file ==== //depot/projects/docproj_nl/share/images/books/handbook/bsdinstall/bsdinstall-configure-network-ipv4-dns.png#2 (text+ko) ==== @@ -1,14 +1,19 @@ PNG --'%F4-X-9<pX˅h\K-8C*- 6.]ZV- %\/v| R----p- \ No newline at end of file ++7꿆@v[7[fّKsfP&1|Ae^S˷bjle>J 8> wwp3 4O8Y4PReayj͇S 6 NHط<s'EM?dS1 w%] ۫HQE_FsW !#}_EV3s6+>U8>uNU ŋȐ +ًl +_ftDU~·{+ @@vߥLVf ?6uYE++++p++Z#\^Ŧ=SeDzcuWPᛒ_uWZU惈z8cӨ);!cؘq'ۭ㻺US?^QW?V#3oV Swkpd3zLͫxIe2G u+V`9q驖Zvr-C&wM>3DblX!W7qdczK{'Ɲ,\6p 2i#:,s,6E;21H'nO_[M +:x̤W;kl v$Ag99z8a'W[U3 kll*; W R+/7{OɵnY=VJZ8|<?Y +O/#gkV) [hrF7 +BkD;Mh+si83HLPpk\w]+n+2Y89ҳg=a'e(9ϸ NLO+ȑmeߨx!+>5VX]ګu8n+pL_LQݵf,F"!N8{ޕ99m-cQ6+&wb:Nf`8+٪@ ٌ C*߉HÓ^ H\ No newline at end of file ==== //depot/projects/docproj_nl/share/sgml/freebsd.ent#25 (text+ko) ==== @@ -1,7 +1,7 @@ <!-- -*- sgml -*- DocBook Miscellaneous FreeBSD Entities. - $FreeBSD: doc/share/sgml/freebsd.ent,v 1.136 2011/09/09 19:40:48 blackend Exp $ + $FreeBSD: doc/share/sgml/freebsd.ent,v 1.138 2011/10/14 18:16:25 blackend Exp $ This file is now valid XML as well as SGML. Please do not add CDATA attributes or anything else that will prevent this file from being ==== //depot/projects/docproj_nl/www/en/donations/donors.sgml#43 (text+ko) ==== @@ -1,6 +1,6 @@ <!DOCTYPE HTML PUBLIC "-//FreeBSD//DTD HTML 4.01 Transitional-Based Extension//EN" [ <!ENTITY base CDATA ".."> -<!ENTITY date "$FreeBSD: www/en/donations/donors.sgml,v 1.428 2011/08/03 00:52:36 gjb Exp $"> +<!ENTITY date "$FreeBSD: www/en/donations/donors.sgml,v 1.430 2011/10/16 18:30:24 wilko Exp $"> <!ENTITY title "Hardware Donors Page"> <!ENTITY % navinclude.about "INCLUDE"> <!ENTITY % developers SYSTEM "../developers.sgml"> %developers; @@ -2863,6 +2863,13 @@ <td> received </td> </tr> + <tr> + <td> <tt>wilko</tt> </td> + <td> 4x 72GB FibreChannel disk for the sparc package building machine</td> + <td> marius </td> + <td> received </td> + </tr> + </table> &footer; ==== //depot/projects/docproj_nl/www/en/internal/developer.sgml#3 (text+ko) ==== @@ -1,6 +1,6 @@ <!DOCTYPE HTML PUBLIC "-//FreeBSD//DTD HTML 4.01 Transitional-Based Extension//EN" [ <!ENTITY base CDATA ".."> -<!ENTITY date "$FreeBSD: www/en/internal/developer.sgml,v 1.40 2008/09/07 14:58:43 simon Exp $"> +<!ENTITY date "$FreeBSD: www/en/internal/developer.sgml,v 1.41 2011/10/15 20:20:46 jmg Exp $"> <!ENTITY title "Resources for FreeBSD Committers"> <!ENTITY % navinclude.docs "INCLUDE"> ]> @@ -13,8 +13,8 @@ <p>This document is an overall guide for all new committers, including both technical details and policy details. For the former, see the chapters on -<a href="../doc/en_US.ISO8859-1/articles/committers-guide/cvs.operations.html"> -CVS Operations</a>, the +<a href="../doc/en_US.ISO8859-1/articles/committers-guide/vcs.operations.html"> +VCS Operations</a>, the <a href="../doc/en_US.ISO8859-1/articles/committers-guide/gnats.html"> GNATS</a> bug tracking system, and the
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201110162134.p9GLYL6x029539>