Date: Thu, 10 Dec 2009 19:33:42 +0300 From: =?koi8-r?Q?=F3=C5=D2=C7=C5=CA=2E=F4=D5=CC=C1?= <printer@klax.tula.ru> To: freebsd-usb@freebsd.org Subject: HP DesignJet 500 and FreeBSD 8.0 - print is impossible Message-ID: <373017996.20091210193342@klax.tula.ru>
index | next in thread | raw e-mail
Hello, All! After installing FreeBSD 8.0 I unable print at USB-connected HP DesignJet 500. I never printing at this hardware via USB before using FreeBSD 8.0. But if this printer is connected to another machine then is works under Windows and FreeBSD 7. For debugging I do: sudo sysctl hw.usb.ulpt.debug=1 Attach printer sudo cp test.prn /dev/ulpt0 And dmesg -a |grep ulpt give me: ulpt0: <Hewlett-Packard DesignJet 500, class 0/0, rev 1.10/1.00, addr 2> on usbus6 ulpt_attach:565: setting alternate config number: 0 ulpt0: using bi-directional mode ulpt_write_callback:220: state=0x0 actlen=0 And nothing was doing. The printer is Ready (it not give work) After some time I press Ctrl+C twice (interrupt sudo cp) and get: ulpt_write_callback:220: state=0x2 actlen=0 ulpt_status_callback:352: error=USB_ERR_STALLED ulpt_status_callback:352: error=USB_ERR_STALLED ulpt_status_callback:352: error=USB_ERR_STALLED ulpt_status_callback:352: error=USB_ERR_STALLED ulpt_status_callback:352: error=USB_ERR_STALLED ulpt_status_callback:352: error=USB_ERR_STALLED ulpt_status_callback:352: error=USB_ERR_STALLED Last line is repeated continuously, until device is detached. After attaching printer this lines is not appeared. sudo usbconfig ugen0.1: <UHCI root HUB Intel> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ugen1.1: <UHCI root HUB Intel> at usbus1, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ugen2.1: <UHCI root HUB Intel> at usbus2, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ugen3.1: <EHCI root HUB Intel> at usbus3, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON ugen4.1: <UHCI root HUB Intel> at usbus4, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ugen5.1: <UHCI root HUB Intel> at usbus5, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ugen6.1: <UHCI root HUB Intel> at usbus6, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ugen7.1: <EHCI root HUB Intel> at usbus7, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON ugen7.2: <MF4100 Canon Inc.> at usbus7, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON ugen4.2: <HP LaserJet 1200 HewLett Packard> at usbus4, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ugen6.2: <DesignJet 500 Hewlett-Packard> at usbus6, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON -- Serghome | help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?373017996.20091210193342>