Date: Tue, 07 Nov 2006 11:34:51 -0600 From: Eric Anderson <anderson@centtech.com> To: freebsd-firewire@freebsd.org Subject: Re: Still no luck with firewire and dv camera (Sony) Message-ID: <4550C3BB.2050701@centtech.com> In-Reply-To: <4547801F.3010607@centtech.com> References: <4547801F.3010607@centtech.com>
next in thread | previous in thread | raw e-mail | index | archive | help
A few questions: 1. Is anyone able to use a Sony camera in this fashion? What are the steps you are taking (if so)? 2. Is anyone maintaining this code anymore? Eric On 10/31/06 10:55, Eric Anderson wrote: > I'm not able to capture any video from my dv camera using FreeBSD. It > works fine with Windows. Here's some info: > > FreeBSD 6.2-PRERELEASE FreeBSD 6.2-PRERELEASE #37: Tue Oct 31 09:40:27 > CST 2006 i386 > > # fwcontrol > 2 devices (info_len=2) > node EUI64 status > 1 39-4f-c0-00-2f-74-e9-21 0 > 0 08-00-46-01-02-f2-57-49 1 > > # fwcontrol -t > crc_len: 4 generation:5 node_count:2 sid_count:2 > id link gap_cnt speed delay cIRM power port0 port1 port2 ini more > 00 1 63 S100 0 1 0W P 1 0 > 01 1 63 S400 0 1 0W C - 0 0 > > # fwcontrol -p > === base register === > 0x07 0x3f 0xe2 0x40 0xc0 0x03 0x00 0x00 > Physical_ID:1 R:1 CPS:1 > RHB:0 IBR:0 Gap_Count:63 > Extended:7 Num_Ports:2 > PHY_Speed:2 Delay:0 > LCtrl:1 C:1 Jitter:0 Pwr_Class:0 > WDIE:0 ISBR:0 CTOI:0 CPSI:0 STOI:0 PEI:0 EAA:1 EMC:1 > Max_Legacy_SPD:0 BLINK:0 Bridge:0 > Page_Select:0 Port_Select0 > > === page 0 port 0 === > 0xfe 0x00 0x00 0x00 0x00 0x00 0x00 0x00 > Astat:3 BStat:3 Ch:1 Con:1 RXOK:1 Dis:0 > Negotiated_speed:0 PIE:0 Fault:0 Stanby_fault:0 Disscrm:0 B_Only:0 > DC_connected:0 Max_port_speed:0 LPP:0 Cable_speed:0 > Connection_unreliable:0 Beta_mode:0 > Port_error:0x0 > Loop_disable:0 In_standby:0 Hard_disable:0 > > === page 0 port 1 === > 0xf8 0x00 0x00 0x00 0x00 0x00 0x00 0x00 > Astat:3 BStat:3 Ch:1 Con:0 RXOK:0 Dis:0 > Negotiated_speed:0 PIE:0 Fault:0 Stanby_fault:0 Disscrm:0 B_Only:0 > DC_connected:0 Max_port_speed:0 LPP:0 Cable_speed:0 > Connection_unreliable:0 Beta_mode:0 > Port_error:0x0 > Loop_disable:0 In_standby:0 Hard_disable:0 > > === page 1 === > 0x01 0x00 0x00 0x0c 0xc2 0x40 0x11 0x04 > Compliance:1 > Vendor_ID:0x000cc2 > Product_ID:0x401104 > > This is a Sony DCR-PC101 camera. > > > > > > Turning on the camera: > Oct 31 10:26:54 neutrino kernel: fwohci0: BUS reset > Oct 31 10:26:54 neutrino kernel: fwohci0: node_id=0xc800ffc1, gen=2, > CYCLEMASTER mode > Oct 31 10:26:54 neutrino kernel: firewire0: 2 nodes, maxhop <= 1, cable > IRM = 1 (me) > Oct 31 10:26:54 neutrino kernel: firewire0: bus manager 1 (me) > Oct 31 10:26:54 neutrino kernel: firewire0: New S100 device > ID:0800460102f25749 > > # fwcontrol -R outfile.dv > fwcontrol: read failed: Input/output error > > which gives me this in my logs: > Oct 31 10:30:03 neutrino kernel: fwohci0: Isochronous receive err 8402(long) > > So I tried: > # sysctl hw.firewire.try_bmr=0 > hw.firewire.try_bmr: 1 -> 0 > # fwcontrol -r > > And I see this: > Oct 31 10:50:18 neutrino kernel: fwohci0: Initiate bus reset > Oct 31 10:50:18 neutrino kernel: fwohci0: BUS reset > Oct 31 10:50:18 neutrino kernel: fwohci0: node_id=0xc800ffc1, gen=3, > CYCLEMASTER mode > Oct 31 10:50:18 neutrino kernel: firewire0: 2 nodes, maxhop <= 1, cable > IRM = 1 (me) > Oct 31 10:50:18 neutrino kernel: fw_rcv: unknown response RRESQ(6) > src=0xffc0 tl=0x24 rt=1 data=0x0 > Oct 31 10:50:18 neutrino kernel: try ad-hoc work around!! > Oct 31 10:50:18 neutrino kernel: no use... > > Then: > # fwcontrol -R outfile.dv > NTSC > 0fwcontrol: unknown format 0xd > > Oct 31 10:51:10 neutrino kernel: fwohci0: Isochronous receive err 8402(long) > > # fwcontrol -R outfile.dv > NTSC > 0fwcontrol: unknown format 0x3f > # fwcontrol -R outfile.dv > NTSC > 01fwcontrol: unknown format 0x39 > # fwcontrol -R outfile.dv > NTSC > 0fwcontrol: unknown format 0x3c > # fwcontrol -R outfile.dv > NTSC > 01fwcontrol: unknown format 0x3f > > Nothing seems to work.. > > Any ideas? > > Eric > > -- ------------------------------------------------------------------------ Eric Anderson Sr. Systems Administrator Centaur Technology Anything that works is better than anything that doesn't. ------------------------------------------------------------------------
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4550C3BB.2050701>