Date: Sat, 10 Apr 2004 13:37:24 +0200 From: Thorsten Greiner <thorsten@tgreiner.net> To: current@freebsd.org Subject: Recent -CURRENT doesn't find ata controller Message-ID: <20040410113724.GA704@tybalt.greiner.local>
next in thread | raw e-mail | index | archive | help
--l76fUT7nc3MelDdI Content-Type: multipart/mixed; boundary="Q68bSM7Ycu6FN28Q" Content-Disposition: inline --Q68bSM7Ycu6FN28Q Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable Hi list, a kernel built from a recent cvsup doesn't recognize my ata controller. I suspect this is related to the recent PCI changes by Warner Losh. The attached dmesg shows a successful boot by a kernel built from Apr 6th sources. Today's faulty one differs from the sucessful boot in that the lines ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 are missing. Instead the line atapci0: Bus reserved 0x10 bytes for rid 0x20 type 4 at 0xbfa0 is displayed. Of course this means that the kernel cannot find its root device and panics later... Please find a dmesg from a working kernel and my kernel config attached. Cheers -Thorsten --=20 Perfection (in design) is achieved not when there is nothing more to add, but rather when there is nothing more to take away. --Q68bSM7Ycu6FN28Q Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="dmesg.txt" Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2-CURRENT #102: Tue Apr 6 13:48:46 CEST 2004 toor@tybalt:/usr/src/sys/i386/compile/TYBALT Preloaded elf kernel "/boot/kernel/kernel" at 0xc0826000. Preloaded elf module "/boot/kernel/snd_ich.ko" at 0xc08261cc. Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc0826278. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0826324. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) 4 Mobile CPU 1.60GHz (1595.30-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf24 Stepping = 4 Features=0x3febf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM> real memory = 536748032 (511 MB) avail memory = 515506176 (491 MB) Pentium 4 TCC support enabled, current performance 100% Pentium Pro MTRR support enabled cpu0 on motherboard npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <DELL CPi R > on motherboard acpi0: [GIANT-LOCKED] pcibios: BIOS version 2.10 Found $PIR table, 11 entries at 0xc00fbb90 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 acpi_acad0: <AC Adapter> on acpi0 acpi_cmbat0: <Control Method Battery> on acpi0 acpi_cmbat1: <Control Method Battery> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib0: slot 29 INTA is routed to irq 11 pcib0: slot 29 INTC is routed to irq 11 pcib0: slot 31 INTB is routed to irq 11 pcib0: slot 31 INTB is routed to irq 11 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib1: slot 0 INTA is routed to irq 11 pci1: <display, VGA> at device 0.0 (no driver attached) uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0xbf80-0xbf9f irq 11 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/11.10, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0xbf20-0xbf3f irq 11 at device 29.2 on pci0 uhci1: [GIANT-LOCKED] usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib2: slot 0 INTA is routed to irq 11 pcib2: slot 1 INTA is routed to irq 11 xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xec80-0xecff mem 0xf8fffc00-0xf8fffc7f irq 11 at device 0.0 on pci2 miibus0: <MII bus> on xl0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto xl0: Ethernet address: 00:06:5b:bc:a4:a4 xl0: [GIANT-LOCKED] cbb0: <TI4451 PCI-CardBus Bridge> at device 1.0 on pci2 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pcib2: slot 1 INTA is routed to irq 11 cbb1: <TI4451 PCI-CardBus Bridge> at device 1.1 on pci2 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 pcib2: slot 1 INTA is routed to irq 11 fwohci0: <Texas Instruments PCI4451> mem 0xf8ff8000-0xf8ffbfff,0xf8fff000-0xf8fff7ff irq 11 at device 1.2 on pci2 fwohci0: [GIANT-LOCKED] fwohci0: OHCI version 1.0 (ROM=1) fwohci0: No. of Isochronous channel is 4. fwohci0: EUI64 47:4f:c0:00:1b:96:b4:10 fwohci0: Phy 1394a available S400, 1 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 46:4f:c0:96:b4:10 fwe0: Ethernet address: 46:4f:c0:96:b4:10 fwohci0: Initiate bus reset fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH3 UDMA100 controller> port 0xbfa0-0xbfaf,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pcm0: <Intel ICH3 (82801CA)> port 0xdc80-0xdcbf,0xd800-0xd8ff irq 11 at device 31.5 on pci0 pcm0: [GIANT-LOCKED] pcm0: <Cirrus Logic CS4205 AC97 Codec> pci0: <simple comms> at device 31.6 (no driver attached) atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model GlidePoint, device ID 0 fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1 port 0x280-0x287,0x2f8-0x2ff irq 3 drq 3 on acpi0 sio1: type 16550A ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 1 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 pmtimer0 on isa0 orm0: <Option ROMs> at iomem 0xcf800-0xcffff,0xcf000-0xcf7ff,0xce800-0xcefff,0xce000-0xce7ff,0xc0000-0xcdfff on isa0 sc0: <System console> on isa0 sc0: VGA <16 virtual consoles, flags=0x200> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 1595302784 Hz quality 800 Timecounters tick every 1.000 msec acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0% ad0: 28615MB <HITACHI_DK23DA-30> [58140/16/63] at ata0-master UDMA100 acd0: CDRW <TOSHIBA CD-RW/DVD-ROM SD-R2102> at ata0-slave UDMA33 Mounting root from ufs:/dev/ad0s1a --Q68bSM7Ycu6FN28Q Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename=TYBALT Content-Transfer-Encoding: quoted-printable # # TYBALT -- configuration for my Dell Inspiron 8200 laptop # include GENERIC ident TYBALT nomakeoption DEBUG makeoptions MODULES_OVERRIDE=3D"linux sound/pcm sound/driver/ich accf_http = acpi linprocfs ipfw smbfs libiconv libmchain msdosfs geom/geom_bde pf pflog= pfsync" nooption SCHED_ULE=09 option SCHED_4BSD #4BSD scheduler # Removed because 'pf' needs INET6 # nooption INET6 nooption MD_ROOT nooption NFS_ROOT nooption AHC_REG_PRETTY_PRINT nooption AHD_REG_PRETTY_PRINT options PQ_CACHESIZE=3D512 # color for 512k/16k cache options HZ=3D1000 # Increase scheduler granularity options RANDOM_IP_ID options SC_KERNEL_CONS_ATTR=3D"(FG_GREEN|BG_BLACK)" options CPU_ENABLE_TCC # Turn off debugging present in GENERIC # nooption DDB #Enable the kernel debugger nooption INVARIANTS #Enable calls of extra sanity checking nooption INVARIANT_SUPPORT #Extra sanity checks of internal structures, re= quired by INVARIANTS nooption WITNESS #Enable checks to detect deadlocks and cycles nooption WITNESS_SKIPSPIN #Don't run witness on spinlocks for speed # Turn off SMP nooption SMP # We don't really need eisa nodevice eisa # ATA and ATAPI devices # device atapicam nodevice ataraid nodevice atapifd nodevice atapisd # SCSI Controllers nodevice ahb nodevice ahc nodevice ahd nodevice amd nodevice isp nodevice mpt nodevice ncr nodevice sym nodevice trm nodevice adv nodevice adw nodevice aha nodevice aic nodevice bt nodevice ncv nodevice nsp nodevice stg # SCSI peripherals nodevice ch nodevice sa nodevice ses # RAID controllers interfaced to the SCSI subsystem nodevice amr nodevice asr nodevice ciss nodevice dpt nodevice iir nodevice ips nodevice mly nodevice twa # RAID controllers nodevice aac nodevice aacp nodevice ida nodevice mlx nodevice pst nodevice twe # Keep nvidia driver happy nodevice agp # Power management support (see NOTES for more options) device apm # Add suspend/resume support for the i8254. device pmtimer # Parallel port nodevice plip # PCI Ethernet NICs. nodevice de nodevice em nodevice txp nodevice vx # PCI Ethernet NICs that use the common MII bus controller code. nodevice bfe nodevice bge nodevice dc nodevice fxp nodevice pcn nodevice re nodevice rl nodevice sf nodevice sis nodevice sk nodevice ste nodevice ti nodevice tl nodevice tx nodevice vr nodevice wb # ISA Ethernet NICs. pccard nics included. nodevice cs # 'device ed' requires 'device miibus' nodevice ed nodevice ex nodevice ep nodevice fe nodevice ie nodevice lnc nodevice sn nodevice xe # ISA devices that use the old ISA shims nodevice le # Wireless NIC cards nodevice wlan nodevice an nodevice awi nodevice wi nodevice wl # Pseudo devices - the number indicates how many units to allocate. nodevice sl nodevice ppp nodevice tun # USB support nodevice ohci nodevice urio # USB Ethernet, requires mii nodevice aue nodevice axe nodevice cue nodevice kue --Q68bSM7Ycu6FN28Q-- --l76fUT7nc3MelDdI Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.4 (FreeBSD) iD8DBQFAd9x0RThlmOhl9moRAsJkAJ0QT91pVDCzHJn1EEVj3yvM5Y90vgCgrvWj VMATbYRSMgUgh5drENYAH+g= =6mLJ -----END PGP SIGNATURE----- --l76fUT7nc3MelDdI--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040410113724.GA704>