Date: Tue, 7 Jan 1997 18:37:38 -0500 (EST) From: Mark Schleifer <marks@digex.net> To: FreeBSD-gnats-submit@freebsd.org Cc: marks@otor.digex.net Subject: kern/2409: psm0: unable to set the command byte. psm0 not found at 0x60 Message-ID: <199701072337.SAA00529@otor.digex.net> Resent-Message-ID: <199701072340.PAA23791@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 2409 >Category: kern >Synopsis: psm0: unable to set the command byte. psm0 not found at 0x60 >Confidential: no >Severity: serious >Priority: high >Responsible: freebsd-bugs >State: open >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Tue Jan 7 15:40:03 PST 1997 >Last-Modified: >Originator: Mark Schleifer >Organization: DIGEX >Release: FreeBSD 2.2-BETA_A i386 >Environment: DEC HiNote Ultra II Laptop Pentium 133MHz 32 MB Ram >Description: On Boot: psm0: unable to set the command byte. psm0 not found at 0x60 Worked under SNAPs and ALPHA. Seems to be root cause of moused and X crashing system. >How-To-Repeat: Kernel made with following config file. This file worked with SNAPs and ALPHA after applying PAO patches. Also tried with PSM_NO_RESET with BETA but that caused the keyboard to lockup at first input request. # # GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks # # $Id: GENERIC,v 1.70 1996/05/13 04:29:13 nate Exp $ # machine "i386" cpu "I586_CPU" ident OTOR-SCSI maxusers 32 options INET #InterNETworking options FFS #Berkeley Fast Filesystem options NFS #Network Filesystem options NFS_NOSERVER #Disable the NFS-server code. options MSDOSFS #MSDOS Filesystem options "CD9660" #ISO 9660 Filesystem options PROCFS #Process filesystem options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] #options SCSI_DELAY=15 #Be pessimistic about Joe SCSI device options BOUNCE_BUFFERS #include support for DMA bounce buffers options UCONSOLE #Allow users to grab the console options FAILSAFE #Be conservative options COMPAT_LINUX # These three options provide support for System V Interface # Definition-style interprocess communication, in the form of shared # memory, semaphores, and message queues, respectively. # options SYSVSHM options SYSVSEM options SYSVMSG # # PERFMON causes the driver for Pentium/Pentium Pro performance counters # to be compiled. See perfmon(4) for more information. # options PERFMON options MROUTING # Multicast routing # laptop-specific configuration options LAPTOP # # If your laptop have not had Windoze95-Ready BIOS, please update it. # Such old BIOS'es sometimes have critical bugs at 32-bit protected # mode APM BIOS interface (which have not used by Windoze 3.1). # PC-card suspend/resume support (experimental) options APM_PCCARD_RESUME options PCIC_RESUME_RESET # Keep power for serial cards when the system suspends # (If your machine hangs up when you try to suspend the system with # FAX/Modem PCMCIA card, uncomment this option). #options SIO_SUSP_KEEP_PWR # 0: silence # 1: simple beep (same as 960414) # 2: (default) new beep options "PCCARD_BEEP=2" config kernel root on wd0 controller isa0 controller pci0 controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr disk fd0 at fdc0 drive 0 #disk fd1 at fdc0 drive 1 #tape ft0 at fdc0 drive 2 controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr disk wd0 at wdc0 drive 0 disk wd1 at wdc0 drive 1 options ATAPI #Enable ATAPI support for IDE bus options ATAPI_STATIC #Don't do it as an LKM device wcd0 #IDE CD-ROM # A single entry for any of these controllers (ncr, ahb, ahc) is sufficient # for any number of installed devices. controller scbus0 device sd0 #SCSI disks device cd0 #Only need one of these, the code dynamically grows controller aic0 at isa? port 0x340 bio irq 11 vector aicintr # syscons is the default console driver, resembling an SCO console device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? port "IO_KBD" tty irq 1 vector pcrint #options PCVT_FREEBSD=210 # pcvt running on FreeBSD >= 2.0.5 options XSERVER # include code for XFree86 #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std # Mandatory, don't remove device npx0 at isa? port "IO_NPX" irq 13 vector npxintr controller crd0 device pcic0 at crd? device pcic1 at crd? controller crd1 device pcic2 at crd? device pcic3 at crd? # # Laptop support (see LINT for more options) # # apm: Laptop Advanced Power Management (experimental) # Notes on APM # Some APM implementations will not work with the `statistics clock' # enabled, so it's disabled by default if the APM driver is enabled. # However, this is not true for all laptops. Try removing the option # APM_BROKEN_STATCLOCK and see if suspend/resume work device apm0 at isa? # Advanced Power Management options APM_BROKEN_STATCLOCK # Workaround some buggy APM BIOS # # Miscellaneous hardware: # # For older notebooks that signal a powerfail condition (external # power supply dropped, or battery state low) by issuing an NMI: options POWERFAIL_NMI # make it beep instead of panicing device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr #device sio2 at isa? port "IO_COM3" tty irq 5 vector siointr #device sio3 at isa? disable port "IO_COM4" tty irq 9 vector siointr device lpt0 at isa? port? tty irq 7 vector lptintr device lpt1 at isa? port? tty #device lpt2 at isa? port? tty device psm0 at isa? port "IO_KBD" conflicts tty irq 12 vector psmintr device ep0 at isa? port 0x300 net irq 7 vector epintr device wlp0 at isa? port 0x300 net irq 11 vector wlpintr #device zp0 at isa? port 0x300 net irq 7 iomem 0xd8000 vector zpintr # joy: joystick device joy0 at isa? port "IO_GAME" # Audio drivers: `snd', `sb', `pas', `gus', `pca' # # snd: Voxware sound support code # sb: SoundBlaster PCM - SoundBlaster, SB Pro, SB16, ProAudioSpectrum # sbxvi: SoundBlaster 16 # sbmidi: SoundBlaster 16 MIDI interface # opl: Yamaha OPL-2 and OPL-3 FM - SB, SB Pro, SB 16, ProAudioSpectrum # # pca: PCM audio through your PC speaker # # The i386/isa/sound/sound.doc has more information. controller snd0 device sb0 at isa? port 0x220 irq 5 conflicts drq 1 vector sbintr #device sbxvi0 at isa? drq 5 #device sbmidi0 at isa? port 0x330 device opl0 at isa? port 0x388 conflicts #device uart0 at isa? port 0x330 irq 5 vector "m6850intr" # Not controlled by `snd' device pca0 at isa? port IO_TIMER1 tty pseudo-device bpfilter 4 #Berkeley packet filter pseudo-device loop pseudo-device ether pseudo-device log pseudo-device sl 1 # ijppp uses tun instead of ppp device pseudo-device ppp 1 pseudo-device tun 1 pseudo-device pty 64 # keep this if you want to be able to continue to use /stand/sysinstall pseudo-device gzip # Exec gzipped a.out's pseudo-device speaker #Play IBM BASIC-style noises out your speaker >Fix: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199701072337.SAA00529>