Date: Sat, 7 Aug 2004 10:12:36 -0500 From: Andrew Lankford <andrew.lankford@verizon.net> To: Scott Long <scottl@samsco.org> Cc: Mark Murray <markm@freebsd.org> Subject: Re: cvs commit: src/sys/amd64/amd64 mp_machdep.c Message-ID: <20040807151236.KGOU1210.out007.verizon.net@outgoing.verizon.net>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
>I just fixed this. Thanks for sending your kernel config. >Note that you probably shouldn't remove the acpi driver from
>the kernel config since it's practically mandatory on amd64
>and won't load correctly from the bootloader.
>
>Scott
I rebuilt my kernel with mem and io disabled, and it worked,
thanks. Unfortunately (as I suspected from a few
messages on amd64@freebsd.org, compiling in acpi
didn't help matters. If I disable acpi from the loader menu,
(surprising, since I thought that item only applied to acpi.ko) I can get all the way to a login screen. If I
leave it enabled, the system locks up when it tries to run
/sbin/init.
I neglected to mention earlier that I can only boot sucessfully because part of a patch to test_kbd_port in atkbdc.c, featured in PR# amd64/67745 (many thanks,
Jung-uk Kim). I don't know if that has anything to do
with acpi or other annoyances, but "in the interests
of full disclosure"...
Attached is a (successful) bootup with acpi disabled.
Thanks
Andrew Lankford
[-- Attachment #2 --]
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #2: Sat Aug 7 10:26:00 EDT 2004
root@bogushost.mshome.net:/usr/obj/usr/src/sys/ARL_AMD64
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff805b9000.
Calibrating clock(s) ... i8254 clock: 1193202 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 797945668 Hz
CPU: AMD Athlon(tm) 64 Processor 3000+ (797.95-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0xf48 Stepping = 8
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
AMD Features=0xe0500800<SYSCALL,NX,MMX+,LM,3DNow+,3DNow>
L1 2MB data TLB: 8 entries, fully associative
L1 2MB instruction TLB: 8 entries, fully associative
L1 4KB data TLB: 32 entries, fully associative
L1 4KB instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 2MB unified TLB: 0 entries, disabled/not present
L2 4KB data TLB: 512 entries, 4-way associative
L2 4KB instruction TLB: 512 entries, 4-way associative
L2 unified cache: 1024 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
real memory = 1073152000 (1023 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x000000000063f000 - 0x000000003e143fff, 1034964992 bytes (252677 pages)
avail memory = 1027584000 (979 MB)
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
pci_open(1): mode 1 addr port (0x0cf8) is 0x80001110
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=00d110de)
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base e8000000, size 27, enabled
found-> vendor=0x10de, dev=0x00d1, revid=0xa4
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10de, dev=0x00d0, revid=0xa6
bus=0, slot=1, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x00a0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 00002040, size 6, enabled
map[24]: type 4, range 32, base 00002000, size 6, enabled
found-> vendor=0x10de, dev=0x00d4, revid=0xa4
bus=0, slot=1, func=1
class=0c-05-00, hdrtype=0x00, mfdev=1
cmdreg=0x0001, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base e0000000, size 12, enabled
found-> vendor=0x10de, dev=0x00d7, revid=0xa5
bus=0, slot=2, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base e0001000, size 12, enabled
found-> vendor=0x10de, dev=0x00d7, revid=0xa5
bus=0, slot=2, func=1
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=b, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base e0004000, size 8, enabled
found-> vendor=0x10de, dev=0x00d8, revid=0xa2
bus=0, slot=2, func=2
class=0c-03-20, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=c, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 00001400, size 8, enabled
map[14]: type 4, range 32, base 00001c00, size 7, enabled
map[18]: type 1, range 32, base e0002000, size 12, enabled
found-> vendor=0x10de, dev=0x00da, revid=0xa2
bus=0, slot=6, func=0
class=04-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x05 (1250 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 00001800, size 8, enabled
map[14]: type 4, range 32, base 00001c80, size 7, enabled
map[18]: type 1, range 32, base e0003000, size 12, enabled
found-> vendor=0x10de, dev=0x00d9, revid=0xa2
bus=0, slot=6, func=1
class=07-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x05 (1250 ns)
intpin=b, irq=10
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 00002080, size 4, enabled
found-> vendor=0x10de, dev=0x00d5, revid=0xa5
bus=0, slot=8, func=0
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
powerspec 2 supports D0 D3 current D0
found-> vendor=0x10de, dev=0x00dd, revid=0xa2
bus=0, slot=10, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x02 (500 ns)
found-> vendor=0x10de, dev=0x00d2, revid=0xa4
bus=0, slot=11, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x10 (480 ns), mingnt=0x0f (3750 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1100, revid=0x00
bus=0, slot=24, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1101, revid=0x00
bus=0, slot=24, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1102, revid=0x00
bus=0, slot=24, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1103, revid=0x00
bus=0, slot=24, func=3
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <nVidia nForce3 USB Controller> mem 0xe0000000-0xe0000fff irq 11 at device 2.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe0000000
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <nVidia nForce3 USB Controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/11.00, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
ohci1: <nVidia nForce3 USB Controller> mem 0xe0001000-0xe0001fff irq 10 at device 2.1 on pci0
ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe0001000
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <nVidia nForce3 USB Controller> on ohci1
usb1: USB revision 1.0
uhub1: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
pci0: <serial bus, USB> at device 2.2 (no driver attached)
pcm0: <Nvidia nForce3> port 0x1c00-0x1c7f,0x1400-0x14ff mem 0xe0002000-0xe0002fff irq 11 at device 6.0 on pci0
pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x1400
pcm0: Reserved 0x80 bytes for rid 0x14 type 4 at 0x1c00
pcm0: [GIANT-LOCKED]
pcm0: <Analog Devices AD1981B AC97 Codec (id = 0x41445374)>
pcm0: Codec features headphone, 20 bit DAC, 5 bit master volume, no 3D Stereo Enhancement
pcm0: Primary codec extended features variable rate PCM, reserved 1, AMAP, reserved 4
pcm0: sndbuf_setmap 3da03000, 4000; 0xffffffffa51e6000 -> 3da03000
pcm0: sndbuf_setmap 3d9f8000, 4000; 0xffffffffa51ea000 -> 3d9f8000
pci0: <simple comms> at device 6.1 (no driver attached)
atapci0: <nVidia nForce3 UDMA133 controller> port 0x2080-0x208f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 8.0 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x2080
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1-slave: stat=0x00 err=0x04 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pcib1: <PCI-PCI bridge> at device 10.0 on pci0
pcib1: secondary bus 2
pcib1: subordinate bus 2
pcib1: I/O decode 0x3000-0x7fff
pcib1: memory decode 0xe0100000-0xe17fffff
pcib1: prefetched decode 0xfff00000-0xfffff
pci2: <PCI bus> on pcib1
pci2: physical bus=2
map[10]: type 1, range 32, base e0108000, size 11, enabled
pcib1: device (null) requested decoded memory range 0xe0108000-0xe01087ff
map[14]: type 1, range 32, base e0100000, size 14, enabled
pcib1: device (null) requested decoded memory range 0xe0100000-0xe0103fff
found-> vendor=0x104c, dev=0x8026, revid=0x00
bus=2, slot=0, func=0
class=0c-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0116, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 00007000, size 8, enabled
pcib1: device (null) requested decoded I/O range 0x7000-0x70ff
map[14]: type 1, range 32, base e0108800, size 8, enabled
pcib1: device (null) requested decoded memory range 0xe0108800-0xe01088ff
found-> vendor=0x10ec, dev=0x8139, revid=0x10
bus=2, slot=1, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0107, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base e0104000, size 13, enabled
pcib1: device (null) requested decoded memory range 0xe0104000-0xe0105fff
found-> vendor=0x14e4, dev=0x4320, revid=0x03
bus=2, slot=2, func=0
class=02-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[10]: type 1, range 32, base e0106000, size 12, enabled
pcib1: device (null) requested decoded memory range 0xe0106000-0xe0106fff
found-> vendor=0x104c, dev=0xac54, revid=0x01
bus=2, slot=4, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0107, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x03 (750 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base e0107000, size 12, enabled
pcib1: device (null) requested decoded memory range 0xe0107000-0xe0107fff
found-> vendor=0x104c, dev=0xac54, revid=0x01
bus=2, slot=4, func=1
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0103, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x03 (750 ns)
intpin=b, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 00007400, size 6, enabled
pcib1: device (null) requested decoded I/O range 0x7400-0x743f
found-> vendor=0x104c, dev=0x8201, revid=0x01
bus=2, slot=4, func=2
class=08-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0107, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x04 (1000 ns)
powerspec 2 supports D0 D3 current D0
pci2: <serial bus, FireWire> at device 0.0 (no driver attached)
rl0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x7000
rl0: <RealTek 8139 10/100BaseTX> port 0x7000-0x70ff mem 0xe0108800-0xe01088ff irq 10 at device 1.0 on pci2
pcib1: device rl0 requested decoded I/O range 0x7000-0x70ff
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: bpf attached
rl0: Ethernet address: 00:0f:b0:03:16:7d
rl0: [GIANT-LOCKED]
pci2: <network> at device 2.0 (no driver attached)
cbb0: <TI1620 PCI-CardBus Bridge> mem 0xe0106000-0xe0106fff irq 11 at device 4.0 on pci2
cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe0106000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
0x00: 0xac54104c 0x02100107 0x06070001 0x00824008
0x10: 0xe0106000 0x020000a0 0x40040302 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b
0x40: 0x006d103c 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x08449061 0x00000000 0x00030004 0x01111d22
0x90: 0x606402c0 0x00000000 0x00000000 0x00000000
0xa0: 0xfe120001 0x00c00000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
cbb1: <TI1620 PCI-CardBus Bridge> mem 0xe0107000-0xe0107fff irq 10 at device 4.1 on pci2
cbb1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe0107000
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
cbb1: [MPSAFE]
cbb1: PCI Configuration space:
0x00: 0xac54104c 0x02100107 0x06070001 0x00824008
0x10: 0xe0107000 0x020000a0 0x40060502 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
0x30: 0x00000000 0xfffffffc 0x00000000 0x0740020a
0x40: 0x006d103c 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x08449161 0x00000000 0x00030004 0x01111d22
0x90: 0x606402c0 0x00000000 0x00000000 0x00000000
0xa0: 0xfe120001 0x00c00000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
pci2: <base peripheral> at device 4.2 (no driver attached)
pcib2: <PCI-PCI bridge> at device 11.0 on pci0
pcib2: secondary bus 1
pcib2: subordinate bus 1
pcib2: I/O decode 0xf000-0xfff
pcib2: memory decode 0xe2000000-0xe2ffffff
pcib2: prefetched decode 0xf0000000-0xf80fffff
pci1: <PCI bus> on pcib2
pci1: physical bus=1
map[10]: type 1, range 32, base e2000000, size 24, enabled
pcib2: device (null) requested decoded memory range 0xe2000000-0xe2ffffff
map[14]: type 3, range 32, base f0000000, size 27, enabled
pcib2: device (null) requested decoded memory range 0xf0000000-0xf7ffffff
map[18]: type 3, range 32, base f8000000, size 19, enabled
pcib2: device (null) requested decoded memory range 0xf8000000-0xf807ffff
found-> vendor=0x10de, dev=0x0179, revid=0xa3
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
cpu0 on motherboard
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xd4000-0xd4fff,0xd0000-0xd3fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0047
psm0: strange result for test aux port (3).
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model GlidePoint, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <4 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xffffffff800b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
isa_probe_children: probing PnP devices
Device configuration finished.
Timecounter "TSC" frequency 797945668 Hz quality 800
Timecounters tick every 0.976 msec
ipfw2 initialized, divert disabled, rule-based forwarding enabled, default to deny, logging disabled
lo0: bpf attached
ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata0-master: setting PIO4 on nVidia nForce3 chip
ata0-master: setting UDMA100 on nVidia nForce3 chip
ad0: <TOSHIBA MK6021GAS/GA024C> ATA-5 disk at ata0-master
ad0: 57231MB (117210240 sectors), 116280 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
GEOM: new disk ad0
ata1-master: pio=0x0c wdma=0x22 udma=0xffffffff cable=80pin
ATAPI_RESET time = 120us
ata1-master: setting PIO4 on nVidia nForce3 chip
acd0: <SD-R2512/1A04> CDRW drive at ata1 as master
acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, test write, burnproof
acd0: Audio: play, 16 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
pcm0: measured ac97 link rate at 47995 Hz, will use 48000 Hz
[0] f:00 typ:7 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:69207957
[1] f:00 typ:12 s(CHS):1023/255/63 e(CHS):1023/254/63 s:69208020 l:8385930
[2] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:77593950 l:39616290
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 35434473984 end 35434506239
GEOM: Configure ad0s2, start 35434506240 length 4293596160 end 39728102399
GEOM: Configure ad0s3, start 39728102400 length 20283540480 end 60011642879
GEOM: Configure ad0s3a, start 0 length 268435456 end 268435455
GEOM: Configure ad0s3b, start 268435456 length 1073741824 end 1342177279
GEOM: Configure ad0s3c, start 0 length 20283540480 end 20283540479
GEOM: Configure ad0s3d, start 1342177280 length 268435456 end 1610612735
GEOM: Configure ad0s3e, start 1610612736 length 18672927744 end 20283540479
Mounting root from ufs:/dev/ad0s3a
start_init: trying /sbin/init
Pre-seeding PRNG:
kickstart
.
Loading configuration files.
Entropy harvesting:
interrupts
ethernet
point_to_point
kickstart
.
swapon: adding /dev/ad0s3b as swap device
Starting file system checks:
/dev/ad0s3a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s3a: clean, 76556 free (492 frags, 9508 blocks, 0.4% fragmentation)
/dev/ad0s3e: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s3e: clean, 7651390 free (43838 frags, 950944 blocks, 0.5% fragmentation)
/dev/ad0s3d: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s3d: clean, 68363 free (475 frags, 8486 blocks, 0.4% fragmentation)
/dev/ad0s2: FILESYSTEM CLEAN; SKIPPING CHECKS
Setting hostname: bogushost.mshome.net.
rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=8<VLAN_MTU>
inet 192.168.0.2 netmask 0xffffff00 broadcast 192.168.0.255
ether 00:0f:b0:03:16:7d
media: Ethernet autoselect (none)
status: no carrier
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet 127.0.0.1 netmask 0xff000000
route:
writing to routing socket
:
No such process
Firewall rules loaded, starting divert daemons:
.
net.inet.ip.fw.enable:
1
->
1
add net default: gateway 192.168.0.1
Additional routing options:
.
Starting devd.
Mounting NFS file systems:
.
Starting syslogd.
Aug 7 10:49:00 bogushost syslogd: kernel boot file is /boot/kernel/kernel
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/local/lib
Starting usbd.
Starting local daemons:
.
Starting lpd.
Updating motd
Aug 7 10:49:01 bogushost lpd[372]: /dev/lpt0: No such file or directory
.
Starting ntpd.
Aug 7 10:49:01 bogushost ntpd[383]: no IPv6 interfaces found
Configuring syscons:
keyrate
keybell
\^[[=39772;5B
cursor
blanktime
screensaver
splash: image decoder found: green_saver
.
Starting sshd.
Initial amd64 initialization:
.
Additional ABI support:
.
Starting cron.
Local package initialization:
.
Additional TCP options:
.
Starting moused:
.
Starting background file system checks in 60 seconds.
Sat Aug 7 10:49:02 EDT 2004
Aug 7 10:49:14 bogushost login: ROOT LOGIN (root) ON ttyv0
mem: <memory>
io: <I/O>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040807151236.KGOU1210.out007.verizon.net>