Date: Thu, 25 Apr 2002 06:00:05 -0700 (PDT) From: Dan Naumov <dan_naumov@yahoo.com> To: freebsd-bugs@FreeBSD.org Subject: Re: i386/37451: top, vmstat and systat refuse to work. Message-ID: <200204251300.g3PD05O58466@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR i386/37451; it has been noted by GNATS.
From: Dan Naumov <dan_naumov@yahoo.com>
To: freebsd-gnats-submit@FreeBSD.org, bug-followup@FreeBSD.org
Cc: roam@ringlet.net
Subject: Re: i386/37451: top, vmstat and systat refuse to work.
Date: Thu, 25 Apr 2002 05:53:52 -0700 (PDT)
I looked closer at the boot process and noticed that
right before boot2 presents me with an ability to load
the kernel, I get a "No /boot/loader" error. When I
type "boot" at the boot2 promt and it starts loading
the kernel, there is also a "loader(8) metadata
missing !" error. However when I cd to /boot, I see
loader.conf, loader itself, and other related files.
What could possibly be wrong and how can I make the
system use loader to boot the kernel ? Originally,
/boot/loader was not set to be executable (what would
it matter that early in the booting process though),
so I went and chmodded it to 755, didn't help.
ls -la from /boot:
================================================================
drwxr-xr-x 3 root wheel 512 Apr 24 21:40 .
drwxr-xr-x 20 root wheel 512 Apr 24 21:41 ..
-r--r--r-- 1 root wheel 512 Apr 24 21:40 boot0
-r--r--r-- 1 root wheel 512 Apr 24 21:40 boot1
-r--r--r-- 1 root wheel 7680 Apr 24 21:40 boot2
-r-xr-xr-x 1 root wheel 1136 Apr 24 21:40 cdboot
drwxr-xr-x 2 root wheel 512 Apr 21 20:49
defaults
-rwxr-xr-x 1 root wheel 155648 Apr 24 21:40 loader
-r--r--r-- 1 root wheel 9237 Jan 28 15:12
loader.4th
-rw-r--r-- 1 root wheel 67 Apr 21 00:03
loader.conf
-r--r--r-- 1 root wheel 12012 Jan 28 15:12
loader.help
-r-xr-xr-x 1 root wheel 159744 Apr 21 20:49
loader.old
-r--r--r-- 1 root wheel 338 Jan 28 15:12
loader.rc
-r--r--r-- 1 root wheel 512 Apr 24 21:40 mbr
-r-xr-xr-x 1 root wheel 157696 Apr 24 21:40
pxeboot
-r--r--r-- 1 root wheel 25121 Jan 28 15:12
support.4th
================================================================
also, dmesg -a output:
================================================================
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989,
1991, 1992, 1993, 1994
The Regents of the University of California. All
rights reserved.
FreeBSD 4.5-STABLE #0: Wed Apr 24 21:33:58 EEST 2002
jago@localhost.localdomain:/usr/obj/usr/src/sys/JAGO
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 1400060896 Hz
CPU: AMD Athlon(tm) processor (1400.06-MHz 686-class
CPU)
Origin = "AuthenticAMD" Id = 0x644 Stepping = 4
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
AMD Features=0xc0440000<<b18>,AMIE,DSP,3DNow!>
real memory = 536805376 (524224K bytes)
avail memory = 518774784 (506616K bytes)
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 10 entries at 0xc00fddb0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <AMD-761 host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <AMD-761 PCI-PCI (4x AGP) bridge> at device 1.0
on pci0
pci1: <PCI bus> on pcib1
pci1: <NVidia GeForce DDR graphics accelerator> at 5.0
irq 10
isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on
pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA100 controller> port
0xc400-0xc40f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <VIA 83C572 USB controller> at 7.2 irq 5
pci0: <VIA 83C572 USB controller> at 7.3 irq 5
pci0: <unknown card> (vendor=0x1106, dev=0x3057) at
7.4
rl0: <RealTek 8139 10/100BaseTX> port 0xe000-0xe0ff
mem 0xdc001000-0xdc0010ff irq 11 at device 10.0 on
pci0
rl0: Ethernet address: 00:e0:7d:9f:be:31
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX,
100baseTX-FDX, auto
pcm0: <Creative CT5880-C> port 0xe400-0xe43f irq 11 at
device 14.0 on pci0
orm0: <Option ROM> at iomem 0xc0000-0xc97ff on isa0
atkbdc0: <Keyboard controller (i8042)> at port
0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ad0: 38182MB <MAXTOR 4K040H2> [77578/16/63] at
ata0-master UDMA100
ad1: 16446MB <ST317221A> [33416/16/63] at ata0-slave
UDMA66
acd0: CDROM <CD-ROM 52X/AKH> at ata1-master PIO4
Mounting root from ufs:ad0s1a
swapon: adding /dev/ad0s1b as swap device
Automatic boot in progress...
/dev/ad0s1a:
FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s1a:
clean, 2446660 free
(18108 frags, 303569 blocks, 0.6% fragmentation)
/dev/ad0s1e:
FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s1e:
clean, 24902 free
(22 frags, 3110 blocks, 0.1% fragmentation)
/dev/ad0s1f:
FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s1f:
clean, 10076047 free
(1103 frags, 1259368 blocks, 0.0% fragmentation)
/dev/ad1s1e:
FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/ad1s1e:
clean, 4136664 free
(904 frags, 516970 blocks, 0.0% fragmentation)
Doing initial network setup:
hostname
.
rl0:
flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu
1500
inet 172.16.161.81 netmask 0xffffff00 broadcast
172.16.161.255
inet6 fe80::2e0:7dff:fe9f:be31%rl0 prefixlen 64
tentative scopeid 0x1
ether 00:e0:7d:9f:be:31
media: Ethernet autoselect (none)
status: no carrier
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu
16384
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
inet 127.0.0.1 netmask 0xff000000
add net default: gateway 172.16.161.1
Additional routing options:
TCP keepalive=YES
.
Routing daemons:
.
Additional daemons:
syslogd
.
Doing additional network setup:
.
Starting final network daemons:
.
ELF ldconfig path: /usr/lib /usr/lib/compat
/usr/X11R6/lib /usr/local/lib
a.out ldconfig path: /usr/lib/aout
/usr/lib/compat/aout /usr/X11R6/lib/aout
Starting standard daemons:
inetd
cron
.
Initial rc.i386 initialization:
.
Configuring syscons:
keymap
blanktime
screensaver
moused
.
Additional ABI support:
linux
.
Starting local daemons:
Master = UDMA33
Slave = ???
.
Local package initialization:
Samba
.
Additional TCP options:
.
Thu Apr 25 15:33:11 EEST 2002
================================================================
In case you're wondering, that UDMA33 thing in "local
daemons" is output of atacontrol set to change the
transfer mode of my CDROM on boot.
Any more information needed ?
Sincerely,
Dan Naumov
__________________________________________________
Do You Yahoo!?
Yahoo! Tax Center - online filing with TurboTax
http://taxes.yahoo.com/
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200204251300.g3PD05O58466>