Date: Mon, 11 May 2009 21:47:33 -0400 From: "Joe A." <fj@panix.com> To: freebsd-stable@freebsd.org Subject: Error message: run_interrupt_driven_hooks:... Message-ID: <20090512014733.GA12271@panix.com>
next in thread | raw e-mail | index | archive | help
--mYCpIKhGyMATD0i+ Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Greetings... Basic data on my experience with the xpt_config hang; I have more detail if needed, but I doubt anyone will believe it. I'm not even sure I do. Some other reports: http://lists.freebsd.org/pipermail/freebsd-questions/2009-April/196116.html Seur Bors Thu Apr 9 14:43:34 UTC 2009. http://lists.freebsd.org/pipermail/freebsd-stable/2009-May/049901.html martinko gamato Mon May 11 22:05:56 UTC 2009 http://www.nabble.com/Freebsd-7.2-RC-boot-problem-tt23257632.html#a23257632 http://forums.pcbsd.org/viewtopic.php?f=1&t=13312 Here is the entire error for me during boot: run_interrupt_driven_hooks: still waiting after BIGNUM seconds for xpt_config It hangs after this point in the boot process: pcm0: <HDA Codec: Realtek ALC885> pcm0: <HDA Driver Revision: 20080420_0052> the boot process does not continue, so the next normal thing does not appear on the console: SMP: AP CPU #1 Launched! but during the hang, this scrolls past (punctuated by the BIGNUM seconds wait) over and over on the console: acpi_tz0: _TMP value is absurd, ignored (-269.4C) Normally, that message is suppressed by this /etc/sysctl.conf entry: hw.acpi.thermal.polling_rate=0 I suppose this means that /etc/sysctl.conf is not parsed and the second CPU is not launched. Hardware in question, as seen by dmesg, is attached; the vendor's specs are: Core 2 Duo (C) E6400 2.13 GHz 1066 MHz front side bus Socket 775 Chipset P965 Motherboard: Asus P5BW-LA HP/Compaq motherboard name: Basswood-UL8E There is RAID on the motherboard; I don't use it. I do use AHCI. BIOS is current; there are no available updates. The onboard firewire is disabled, since it began (prior to 7.1) causing unresolvable panics. CAM is in my kernel: # SCSI peripherals #Added atapicam; apparently, cdparanoia requires it. device atapicam device scbus # SCSI bus (required for SCSI) device da # Direct Access (disks) device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct SCSI access) As of 9:30 PM EDT May 11, the issue has de-Heisenberged from my PC. I'm not subscribed to the list; so you'll need to Cc: me if you think I can help. --mYCpIKhGyMATD0i+ Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="dmesg.May.11.2009" Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.1-RELEASE-p5 #0: Sun May 3 06:43:50 EDT 2009 root@whisperer.chthonixia.net:/usr/obj/usr/src/sys/WHISPERER Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz (2135.55-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM> AMD Features=0x20000000<LM> AMD Features2=0x1<LAHF> Cores per package: 2 real memory = 2146299904 (2046 MB) avail memory = 2094936064 (1997 MB) ACPI APIC Table: <HP-CPC ASUSACPI> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0: Changing APIC ID to 4 ioapic0 <Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: <HP-CPC ASUSACPI> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, 7fde0000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 device_attach: acpi_hpet0 attach returned 12 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0xde00-0xdeff mem 0xe0000000-0xefffffff,0xfddf0000-0xfddfffff irq 16 at device 0.0 on pci1 vgapci1: <VGA-compatible display> mem 0xfdde0000-0xfddeffff at device 0.1 on pci1 uhci0: <Intel 82801H (ICH8) USB controller USB-D> port 0xff00-0xff1f irq 21 at device 26.0 on pci0 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: <Intel 82801H (ICH8) USB controller USB-D> on uhci0 usb0: USB revision 1.0 uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801H (ICH8) USB controller USB-E> port 0xfe00-0xfe1f irq 18 at device 26.1 on pci0 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: <Intel 82801H (ICH8) USB controller USB-E> on uhci1 usb1: USB revision 1.0 uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered ehci0: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> mem 0xfdfff000-0xfdfff3ff irq 21 at device 26.7 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb2: EHCI version 1.0 usb2: companion controllers, 2 ports each: usb0 usb1 usb2: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> on ehci0 usb2: USB revision 2.0 uhub2: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2 uhub2: 4 ports with 4 removable, self powered pcm0: <Intel 82801H High Definition Audio Controller> mem 0xfdff4000-0xfdff7fff irq 22 at device 27.0 on pci0 pcm0: [ITHREAD] uhci2: <Intel 82801H (ICH8) USB controller USB-A> port 0xfd00-0xfd1f irq 23 at device 29.0 on pci0 uhci2: [GIANT-LOCKED] uhci2: [ITHREAD] usb3: <Intel 82801H (ICH8) USB controller USB-A> on uhci2 usb3: USB revision 1.0 uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3 uhub3: 2 ports with 2 removable, self powered uhci3: <Intel 82801H (ICH8) USB controller USB-B> port 0xfc00-0xfc1f irq 17 at device 29.1 on pci0 uhci3: [GIANT-LOCKED] uhci3: [ITHREAD] usb4: <Intel 82801H (ICH8) USB controller USB-B> on uhci3 usb4: USB revision 1.0 uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4 uhub4: 2 ports with 2 removable, self powered uhci4: <Intel 82801H (ICH8) USB controller USB-C> port 0xfb00-0xfb1f irq 18 at device 29.2 on pci0 uhci4: [GIANT-LOCKED] uhci4: [ITHREAD] usb5: <Intel 82801H (ICH8) USB controller USB-C> on uhci4 usb5: USB revision 1.0 uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5 uhub5: 2 ports with 2 removable, self powered ehci1: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> mem 0xfdffe000-0xfdffe3ff irq 23 at device 29.7 on pci0 ehci1: [GIANT-LOCKED] ehci1: [ITHREAD] usb6: EHCI version 1.0 usb6: companion controllers, 2 ports each: usb3 usb4 usb5 usb6: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> on ehci1 usb6: USB revision 2.0 uhub6: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb6 uhub6: 6 ports with 6 removable, self powered pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci2: <ACPI PCI bus> on pcib2 ath0: <Atheros 5212> mem 0xfdee0000-0xfdeeffff irq 17 at device 0.0 on pci2 ath0: [ITHREAD] ath0: WARNING: using obsoleted if_watchdog interface ath0: Ethernet address: 00:14:6c:89:30:1c ath0: mac 7.9 phy 4.5 radio 5.6 fwohci0: <VIA Fire II (VT6306)> port 0xcf00-0xcf7f mem 0xfdeff000-0xfdeff7ff irq 16 at device 4.0 on pci2 fwohci0: [FILTER] fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:11:06:66:00:00:03:12 fwohci0: Phy 1394a available S400, 3 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 sbp0: <SBP-2/SCSI over FireWire> on firewire0 dcons_crom0: <dcons configuration ROM> on firewire0 dcons_crom0: bus_addr 0x1264000 fwohci0: Initiate bus reset fwohci0: BUS reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel AHCI controller> port 0xfa00-0xfa07,0xf900-0xf903,0xf800-0xf807,0xf700-0xf703,0xf600-0xf61f mem 0xfdffd000-0xfdffd7ff irq 19 at device 31.2 on pci0 atapci0: [ITHREAD] atapci0: AHCI Version 01.10 controller with 6 ports detected ata2: <ATA channel 0> on atapci0 ata2: [ITHREAD] ata3: <ATA channel 1> on atapci0 ata3: [ITHREAD] ata4: <ATA channel 2> on atapci0 ata4: [ITHREAD] ata5: <ATA channel 3> on atapci0 ata5: [ITHREAD] ata6: <ATA channel 4> on atapci0 ata6: [ITHREAD] ata7: <ATA channel 5> on atapci0 ata7: [ITHREAD] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_tz0: <Thermal Zone> on acpi0 cpu0: <ACPI CPU> on acpi0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 cpu1: <ACPI CPU> on acpi0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 823082306000823 device_attach: est1 attach returned 6 p4tcc1: <CPU Frequency Thermal Control> on cpu1 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 device_attach: acpi_hpet0 attach returned 12 orm0: <ISA Option ROM> at iomem 0xd0000-0xd1fff pnpid ORM0000 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0 ata0: [ITHREAD] ata1 at port 0x170-0x177,0x376 irq 15 on isa0 ata1: [ITHREAD] atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] ums0: <Razer Razer Diamondback Optical Mouse, class 0/0, rev 2.00/1.00, addr 2> on uhub3 ums0: 7 buttons and Z dir. ukbd0: <vendor 0x1241 USB Keyboard, class 0/0, rev 1.10/2.80, addr 3> on uhub3 kbd2 at ukbd0 uhid0: <vendor 0x1241 USB Keyboard, class 0/0, rev 1.10/2.80, addr 3> on uhub3 Timecounters tick every 1.000 msec firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) acpi_tz0: _TMP value is absurd, ignored (-268.9C) acpi_tz0: _TMP value is absurd, ignored (-268.9C) acpi_tz0: _TMP value is absurd, ignored (-268.9C) acpi_tz0: _TMP value is absurd, ignored (-268.9C) acpi_tz0: _TMP value is absurd, ignored (-268.9C) ad4: 238475MB <WDC WD2500JS-60NCB1 10.02E02> at ata2-master SATA300 ad10: 305245MB <Seagate ST3320620AS 3.AAE> at ata5-master SATA150 acd0: DVDR <HL-DT-STDVDRRW GSA-H30L/S544> at ata6-master SATA150 pcm0: <HDA Codec: Realtek ALC885> pcm0: <HDA Driver Revision: 20080420_0052> SMP: AP CPU #1 Launched! acpi_tz0: _TMP value is absurd, ignored (-269.4C) cd0 at ata6 bus 0 target 0 lun 0 cd0: <HL-DT-ST DVDRRW GSA-H30L S544> Removable CD-ROM SCSI-0 device cd0: 3.300MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present Trying to mount root from ufs:/dev/ad4s1a ath0: link state changed to UP acpi_tz0: _TMP value is absurd, ignored (-269.5C) ath0: device timeout ath0: link state changed to DOWN ath0: link state changed to UP ath0: link state changed to DOWN ath0: link state changed to UP ath0: link state changed to DOWN ath0: link state changed to UP ath0: link state changed to DOWN ath0: link state changed to UP --mYCpIKhGyMATD0i+--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20090512014733.GA12271>