Date: Mon, 23 Feb 2015 09:00:24 +0100 From: David Demelier <demelier.david@gmail.com> To: freebsd-current@freebsd.org Subject: Re: msk0 watchdog timeout Marvel 88E8071 Message-ID: <54EADE18.3030804@gmail.com> In-Reply-To: <CAA_tkES2n3M6xeoyjVQ0kYgfK-he%2BjwhwD-Njsj=hc9BkZAYcw@mail.gmail.com> References: <CAA_tkES2n3M6xeoyjVQ0kYgfK-he%2BjwhwD-Njsj=hc9BkZAYcw@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Le 21/02/2015 23:46, Roosevelt Littleton a écrit : > My msk0 is not even functional and my wifi is my only usable connection to > the internet. > I have this in my loader.conf: hw.msk.msi_disable=1 hw.pci.enable_msix=0 > and this in my sysctl.conf net.inet.tcp.tso=0 > > vmstat -i > interrupt total rate > irq1: atkbd0 552 1 > irq9: acpi0 2561 3 > irq12: psm0 2322 3 > irq16: mskc0 2104711 2572 > irq20: hpet0 uhci0* 133497 163 > irq256: vgapci0 970 1 > irq257: hdac0 7680 9 > irq259: ahci0:ch0 526 1 > irq260: ahci0:ch1 100128 122 > irq264: ahci0:ch5 1739 2 > Total 2354686 2878 > > > > dmesg > Copyright (c) 1992-2015 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 11.0-CURRENT #0 r279013: Thu Feb 19 22:30:02 EST 2015 > root@Mizraim:/usr/obj/usr/src/sys/ZENNLA amd64 > FreeBSD clang version 3.5.1 (tags/RELEASE_351/final 225668) 20150115 > VT: running with driver "vga". > module_register: module pci/mskc already exists! > Module pci/mskc failed to register: 17 > module_register: module mskc/msk already exists! > Module mskc/msk failed to register: 17 > module_register: module msk/miibus already exists! > Module msk/miibus failed to register: 17 > CPU: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz (2261.05-MHz K8-class > CPU) > Origin="GenuineIntel" Id=0x10676 Family=0x6 Model=0x17 Stepping=6 > > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > > Features2=0x8e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1> > AMD Features=0x20100800<SYSCALL,NX,LM> > AMD Features2=0x1<LAHF> > VT-x: HLT,PAUSE > TSC: P-state invariant, performance statistics > real memory = 4294967296 (4096 MB) > avail memory = 4076457984 (3887 MB) > Event timer "LAPIC" quality 400 > ACPI APIC Table: <PTLTD APIC > > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs > FreeBSD/SMP: 1 package(s) x 2 core(s) > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 1 > ioapic0 <Version 2.0> irqs 0-23 on motherboard > random: entropy device infrastructure driver > random: selecting highest priority adaptor <Dummy> > kbd1 at kbdmux0 > module_register_init: MOD_LOAD (vesa, 0xffffffff80e77bc0, 0) error 19 > netmap: loaded module > random: SOFT: yarrow init() > random: selecting highest priority adaptor <Yarrow> > vtvga0: <VT VGA driver> on motherboard > acpi0: <GATEWA SYSTEM> on motherboard > acpi0: Power Button (fixed) > Timecounter "HPET" frequency 14318180 Hz quality 950 > Event timer "HPET" frequency 14318180 Hz quality 450 > Event timer "HPET1" frequency 14318180 Hz quality 440 > Event timer "HPET2" frequency 14318180 Hz quality 440 > Event timer "HPET3" frequency 14318180 Hz quality 440 > cpu0: <ACPI CPU> on acpi0 > cpu1: <ACPI CPU> on acpi0 > atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 > atrtc0: Warning: Couldn't map I/O. > Event timer "RTC" frequency 32768 Hz quality 0 > attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 > Timecounter "i8254" frequency 1193182 Hz quality 0 > Event timer "i8254" frequency 1193182 Hz quality 100 > Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 > acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 > pci1: <ACPI PCI bus> on pcib1 > vgapci0: <VGA-compatible display> port 0x2000-0x207f mem > 0xf2000000-0xf2ffffff,0xd0000000-0xdfffffff,0xf0000000-0xf1ffffff irq 16 at > device 0.0 on pci1 > nvidia0: <GeForce 9800M GTS> on vgapci0 > vgapci0: child nvidia0 requested pci_enable_io > vgapci0: child nvidia0 requested pci_enable_io > vgapci0: Boot video device > uhci0: <Intel 82801I (ICH9) USB controller> port 0x1800-0x181f irq 20 at > device 26.0 on pci0 > usbus0 on uhci0 > uhci1: <Intel 82801I (ICH9) USB controller> port 0x1820-0x183f irq 20 at > device 26.1 on pci0 > usbus1 on uhci1 > uhci2: <Intel 82801I (ICH9) USB controller> port 0x1840-0x185f irq 20 at > device 26.2 on pci0 > usbus2 on uhci2 > ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xf3504800-0xf3504bff > irq 20 at device 26.7 on pci0 > usbus3: EHCI version 1.0 > usbus3 on ehci0 > hdac0: <Intel 82801I HDA Controller> mem 0xf3500000-0xf3503fff irq 21 at > device 27.0 on pci0 > pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 > pci2: <ACPI PCI bus> on pcib2 > mskc0: <Marvell Yukon 88E8071 Gigabit Ethernet> port 0x3000-0x30ff mem > 0xf3000000-0xf3003fff irq 16 at device 0.0 on pci2 > msk0: <Marvell Technology Group Ltd. Yukon EX Id 0xb5 Rev 0x02> on mskc0 > msk0: Using defaults for TSO: 65518/35/2048 > msk0: Ethernet address: 00:1d:72:ed:56:80 > miibus0: <MII bus> on msk0 > e1000phy0: <Marvell 88E1149 Gigabit PHY> PHY 0 on miibus0 > e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, > 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, > auto-flow > pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 > pci3: <ACPI PCI bus> on pcib3 > pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 > pci4: <ACPI PCI bus> on pcib4 > iwn0: <Intel WiFi Link 5100> mem 0xf3100000-0xf3101fff irq 18 at device 0.0 > on pci4 > pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 > pci5: <ACPI PCI bus> on pcib5 > uhci3: <Intel 82801I (ICH9) USB controller> port 0x1860-0x187f irq 23 at > device 29.0 on pci0 > usbus4 on uhci3 > uhci4: <Intel 82801I (ICH9) USB controller> port 0x1880-0x189f irq 17 at > device 29.1 on pci0 > usbus5 on uhci4 > uhci5: <Intel 82801I (ICH9) USB controller> port 0x18a0-0x18bf irq 18 at > device 29.2 on pci0 > usbus6 on uhci5 > ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xf3504c00-0xf3504fff > irq 23 at device 29.7 on pci0 > usbus7: EHCI version 1.0 > usbus7 on ehci1 > pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > pci13: <ACPI PCI bus> on pcib6 > pci13: <serial bus, FireWire> at device 6.0 (no driver attached) > sdhci_pci0: <Generic SD HCI> mem 0xf3202800-0xf32028ff irq 22 at device 6.2 > on pci13 > sdhci_pci0: 1 slot(s) allocated > pci13: <mass storage> at device 6.3 (no driver attached) > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > ahci0: <Intel ICH9M AHCI SATA controller> port > 0x18f0-0x18f7,0x18e4-0x18e7,0x18e8-0x18ef,0x18e0-0x18e3,0x18c0-0x18df mem > 0xf3504000-0xf35047ff irq 19 at device 31.2 on pci0 > ahci0: AHCI v1.20 with 4 3Gbps ports, Port Multiplier supported > ahcich0: <AHCI channel> at channel 0 on ahci0 > ahcich1: <AHCI channel> at channel 1 on ahci0 > ahcich4: <AHCI channel> at channel 4 on ahci0 > ahcich5: <AHCI channel> at channel 5 on ahci0 > acpi_lid0: <Control Method Lid Switch> on acpi0 > acpi_button0: <Sleep Button> on acpi0 > acpi_tz0: <Thermal Zone> on acpi0 > acpi_tz1: <Thermal Zone> on acpi0 > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: [GIANT-LOCKED] > psm0: model Generic PS/2 mouse, device ID 0 > battery0: <ACPI Control Method Battery> on acpi0 > acpi_acad0: <AC Adapter> on acpi0 > orm0: <ISA Option ROM> at iomem 0xce000-0xcf7ff on isa0 > ppc0: cannot reserve I/O port range > coretemp0: <CPU On-Die Thermal Sensors> on cpu0 > est0: <Enhanced SpeedStep Frequency Control> on cpu0 > coretemp1: <CPU On-Die Thermal Sensors> on cpu1 > est1: <Enhanced SpeedStep Frequency Control> on cpu1 > Timecounters tick every 1.000 msec > hdacc0: <Conexant CX20561 (Hermosa) HDA CODEC> at cad 0 on hdac0 > hdaa0: <Conexant CX20561 (Hermosa) Audio Function Group> at nid 1 on hdacc0 > pcm0: <Conexant CX20561 (Hermosa) (Analog)> at nid 26 and 23,29 on hdaa0 > pcm1: <Conexant CX20561 (Hermosa) (Rear Analog Headphones)> at nid 22 on > hdaa0 > pcm2: <Conexant CX20561 (Hermosa) (Ext-Rear Digital)> at nid 28 on hdaa0 > hdacc1: <Conexant (0x2c06) HDA CODEC> at cad 1 on hdac0 > unknown: <Conexant (0x2c06) HDA CODEC Modem Function Group> at nid 2 on > hdacc1 (no driver attached) > hdacc2: <NVIDIA MCP78 HDA CODEC> at cad 2 on hdac0 > hdaa1: <NVIDIA MCP78 Audio Function Group> at nid 1 on hdacc2 > pcm3: <NVIDIA MCP78 (Digital)> at nid 5 on hdaa1 > usbus0: 12Mbps Full Speed USB v1.0 > usbus1: 12Mbps Full Speed USB v1.0 > usbus2: 12Mbps Full Speed USB v1.0 > ugen0.1: <Intel> at usbus0 > ugen1.1: <Intel> at usbus1 > uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 > uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 > ugen2.1: <Intel> at usbus2 > uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 > usbus3: 480Mbps High Speed USB v2.0 > usbus4: 12Mbps Full Speed USB v1.0 > usbus5: 12Mbps Full Speed USB v1.0 > ugen3.1: <Intel> at usbus3 > ugen4.1: <Intel> at usbus4 > uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 > uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 > ugen5.1: <Intel> at usbus5 > uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 > usbus6: 12Mbps Full Speed USB v1.0 > usbus7: 480Mbps High Speed USB v2.0 > ugen6.1: <Intel> at usbus6 > uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 > ugen7.1: <Intel> at usbus7 > uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7 > ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 > ada0: <ST9750420AS 0001SDM5> ATA-8 SATA 2.x device > ada0: Serial Number 5WS0F7XC > ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) > ada0: Command Queueing enabled > ada0: 715404MB (1465149168 512 byte sectors: 16H 63S/T 16383C) > ada0: quirks=0x1<4K> > ada0: Previously was known as ad4 > ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 > ada1: <ST9750420AS 0001SDM5> ATA-8 SATA 2.x device > ada1: Serial Number 5WS0FD86 > ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) > ada1: Command Queueing enabled > ada1: 715404MB (1465149168 512 byte sectors: 16H 63S/T 16383C) > ada1: quirks=0x1<4K> > ada1: Previously was known as ad6 > random: unblocking device. > SMP: AP CPU #1 Launched! > Timecounter "TSC-low" frequency 1130523621 Hz quality 1000 > uhub0: 2 ports with 2 removable, self powered > uhub1: 2 ports with 2 removable, self powered > uhub2: 2 ports with 2 removable, self powered > uhub4: 2 ports with 2 removable, self powered > uhub5: 2 ports with 2 removable, self powered > uhub6: 2 ports with 2 removable, self powered > cd0 at ahcich5 bus 0 scbus3 target 0 lun 0 > cd0: <HL-DT-ST DVDRAM GSA-T50F TP01> Removable CD-ROM SCSI-0 device > cd0: Serial Number K00893F1713 > cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytes) > cd0: Attempt to query device size failed: NOT READY, Medium not present > uhub3: 6 ports with 6 removable, self powered > uhub7: 6 ports with 6 removable, self powered > Root mount waiting for: usbus3 > ugen3.2: <Chicony Electronics Co., Ltd.> at usbus3 > Trying to mount root from ufs:/dev/ada1p2 [rw]... > pid 1034 (cinnamon), uid 1001: exited on signal 11 (core dumped) > msk0: watchdog timeout > msk0: link state changed to DOWN > msk0: link state changed to UP > msk0: watchdog timeout > msk0: link state changed to DOWN > msk0: link state changed to UP > ifa_del_loopback_route: deletion failed: 48 > ifa_del_loopback_route: deletion failed: 3 > wlan0: Ethernet address: 00:21:6b:71:7d:36 > iwn0: iwn_read_firmware: ucode rev=0x08530501 > iwn0: iwn_read_firmware: ucode rev=0x08530501 > ifa_del_loopback_route: deletion failed: 48 > wlan0: Ethernet address: 00:21:6b:71:7d:36 > iwn0: iwn_read_firmware: ucode rev=0x08530501 > iwn0: iwn_read_firmware: ucode rev=0x08530501 > iwn0: iwn_read_firmware: ucode rev=0x08530501 > ifa_del_loopback_route: deletion failed: 48 > wlan0: Ethernet address: 00:21:6b:71:7d:36 > iwn0: iwn_read_firmware: ucode rev=0x08530501 > iwn0: iwn_read_firmware: ucode rev=0x08530501 > Waiting (max 60 seconds) for system process `vnlru' to stop...done > Waiting (max 60 seconds) for system process `bufdaemon' to stop...done > Waiting (max 60 seconds) for system process `syncer' to stop... > Syncing disks, vnodes remaining...16 5 5 3 2 2 0 0 done > All buffers synced. > Copyright (c) 1992-2015 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 11.0-CURRENT #0 r279013: Thu Feb 19 22:30:02 EST 2015 > root@Mizraim:/usr/obj/usr/src/sys/ZENNLA amd64 > FreeBSD clang version 3.5.1 (tags/RELEASE_351/final 225668) 20150115 > VT: running with driver "vga". > module_register: module pci/mskc already exists! > Module pci/mskc failed to register: 17 > module_register: module mskc/msk already exists! > Module mskc/msk failed to register: 17 > module_register: module msk/miibus already exists! > Module msk/miibus failed to register: 17 > CPU: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz (2261.05-MHz K8-class > CPU) > Origin="GenuineIntel" Id=0x10676 Family=0x6 Model=0x17 Stepping=6 > > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > > Features2=0x8e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1> > AMD Features=0x20100800<SYSCALL,NX,LM> > AMD Features2=0x1<LAHF> > VT-x: HLT,PAUSE > TSC: P-state invariant, performance statistics > real memory = 4294967296 (4096 MB) > avail memory = 4076457984 (3887 MB) > Event timer "LAPIC" quality 400 > ACPI APIC Table: <PTLTD APIC > > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs > FreeBSD/SMP: 1 package(s) x 2 core(s) > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 1 > ioapic0 <Version 2.0> irqs 0-23 on motherboard > random: entropy device infrastructure driver > random: selecting highest priority adaptor <Dummy> > kbd1 at kbdmux0 > module_register_init: MOD_LOAD (vesa, 0xffffffff80e77bc0, 0) error 19 > netmap: loaded module > random: SOFT: yarrow init() > random: selecting highest priority adaptor <Yarrow> > vtvga0: <VT VGA driver> on motherboard > acpi0: <GATEWA SYSTEM> on motherboard > acpi0: Power Button (fixed) > Timecounter "HPET" frequency 14318180 Hz quality 950 > Event timer "HPET" frequency 14318180 Hz quality 450 > Event timer "HPET1" frequency 14318180 Hz quality 440 > Event timer "HPET2" frequency 14318180 Hz quality 440 > Event timer "HPET3" frequency 14318180 Hz quality 440 > cpu0: <ACPI CPU> on acpi0 > cpu1: <ACPI CPU> on acpi0 > atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 > atrtc0: Warning: Couldn't map I/O. > Event timer "RTC" frequency 32768 Hz quality 0 > attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 > Timecounter "i8254" frequency 1193182 Hz quality 0 > Event timer "i8254" frequency 1193182 Hz quality 100 > Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 > acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 > pci1: <ACPI PCI bus> on pcib1 > vgapci0: <VGA-compatible display> port 0x2000-0x207f mem > 0xf2000000-0xf2ffffff,0xd0000000-0xdfffffff,0xf0000000-0xf1ffffff irq 16 at > device 0.0 on pci1 > nvidia0: <GeForce 9800M GTS> on vgapci0 > vgapci0: child nvidia0 requested pci_enable_io > vgapci0: child nvidia0 requested pci_enable_io > vgapci0: Boot video device > uhci0: <Intel 82801I (ICH9) USB controller> port 0x1800-0x181f irq 20 at > device 26.0 on pci0 > usbus0 on uhci0 > uhci1: <Intel 82801I (ICH9) USB controller> port 0x1820-0x183f irq 20 at > device 26.1 on pci0 > usbus1 on uhci1 > uhci2: <Intel 82801I (ICH9) USB controller> port 0x1840-0x185f irq 20 at > device 26.2 on pci0 > usbus2 on uhci2 > ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xf3504800-0xf3504bff > irq 20 at device 26.7 on pci0 > usbus3: EHCI version 1.0 > usbus3 on ehci0 > hdac0: <Intel 82801I HDA Controller> mem 0xf3500000-0xf3503fff irq 21 at > device 27.0 on pci0 > pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 > pci2: <ACPI PCI bus> on pcib2 > mskc0: <Marvell Yukon 88E8071 Gigabit Ethernet> port 0x3000-0x30ff mem > 0xf3000000-0xf3003fff irq 16 at device 0.0 on pci2 > msk0: <Marvell Technology Group Ltd. Yukon EX Id 0xb5 Rev 0x02> on mskc0 > msk0: Using defaults for TSO: 65518/35/2048 > msk0: Ethernet address: 00:1d:72:ed:56:80 > miibus0: <MII bus> on msk0 > e1000phy0: <Marvell 88E1149 Gigabit PHY> PHY 0 on miibus0 > e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, > 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, > auto-flow > pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 > pci3: <ACPI PCI bus> on pcib3 > pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 > pci4: <ACPI PCI bus> on pcib4 > iwn0: <Intel WiFi Link 5100> mem 0xf3100000-0xf3101fff irq 18 at device 0.0 > on pci4 > pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 > pci5: <ACPI PCI bus> on pcib5 > uhci3: <Intel 82801I (ICH9) USB controller> port 0x1860-0x187f irq 23 at > device 29.0 on pci0 > usbus4 on uhci3 > uhci4: <Intel 82801I (ICH9) USB controller> port 0x1880-0x189f irq 17 at > device 29.1 on pci0 > usbus5 on uhci4 > uhci5: <Intel 82801I (ICH9) USB controller> port 0x18a0-0x18bf irq 18 at > device 29.2 on pci0 > usbus6 on uhci5 > ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xf3504c00-0xf3504fff > irq 23 at device 29.7 on pci0 > usbus7: EHCI version 1.0 > usbus7 on ehci1 > pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > pci13: <ACPI PCI bus> on pcib6 > pci13: <serial bus, FireWire> at device 6.0 (no driver attached) > sdhci_pci0: <Generic SD HCI> mem 0xf3202800-0xf32028ff irq 22 at device 6.2 > on pci13 > sdhci_pci0: 1 slot(s) allocated > pci13: <mass storage> at device 6.3 (no driver attached) > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > ahci0: <Intel ICH9M AHCI SATA controller> port > 0x18f0-0x18f7,0x18e4-0x18e7,0x18e8-0x18ef,0x18e0-0x18e3,0x18c0-0x18df mem > 0xf3504000-0xf35047ff irq 19 at device 31.2 on pci0 > ahci0: AHCI v1.20 with 4 3Gbps ports, Port Multiplier supported > ahcich0: <AHCI channel> at channel 0 on ahci0 > ahcich1: <AHCI channel> at channel 1 on ahci0 > ahcich4: <AHCI channel> at channel 4 on ahci0 > ahcich5: <AHCI channel> at channel 5 on ahci0 > acpi_lid0: <Control Method Lid Switch> on acpi0 > acpi_button0: <Sleep Button> on acpi0 > acpi_tz0: <Thermal Zone> on acpi0 > acpi_tz1: <Thermal Zone> on acpi0 > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: [GIANT-LOCKED] > psm0: model Generic PS/2 mouse, device ID 0 > battery0: <ACPI Control Method Battery> on acpi0 > acpi_acad0: <AC Adapter> on acpi0 > orm0: <ISA Option ROM> at iomem 0xce000-0xcf7ff on isa0 > ppc0: cannot reserve I/O port range > coretemp0: <CPU On-Die Thermal Sensors> on cpu0 > est0: <Enhanced SpeedStep Frequency Control> on cpu0 > coretemp1: <CPU On-Die Thermal Sensors> on cpu1 > est1: <Enhanced SpeedStep Frequency Control> on cpu1 > usbus0: 12Mbps Full Speed USB v1.0 > Timecounters tick every 1.000 msec > hdacc0: <Conexant CX20561 (Hermosa) HDA CODEC> at cad 0 on hdac0 > hdaa0: <Conexant CX20561 (Hermosa) Audio Function Group> at nid 1 on hdacc0 > pcm0: <Conexant CX20561 (Hermosa) (Analog)> at nid 26 and 23,29 on hdaa0 > pcm1: <Conexant CX20561 (Hermosa) (Rear Analog Headphones)> at nid 22 on > hdaa0 > pcm2: <Conexant CX20561 (Hermosa) (Ext-Rear Digital)> at nid 28 on hdaa0 > hdacc1: <Conexant (0x2c06) HDA CODEC> at cad 1 on hdac0 > unknown: <Conexant (0x2c06) HDA CODEC Modem Function Group> at nid 2 on > hdacc1 (no driver attached) > hdacc2: <NVIDIA MCP78 HDA CODEC> at cad 2 on hdac0 > hdaa1: <NVIDIA MCP78 Audio Function Group> at nid 1 on hdacc2 > pcm3: <NVIDIA MCP78 (Digital)> at nid 5 on hdaa1 > usbus1: 12Mbps Full Speed USB v1.0 > usbus2: 12Mbps Full Speed USB v1.0 > ugen0.1: <Intel> at usbus0 > ugen1.1: <Intel> at usbus1 > uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 > uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 > ugen2.1: <Intel> at usbus2 > uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 > usbus3: 480Mbps High Speed USB v2.0 > usbus4: 12Mbps Full Speed USB v1.0 > usbus5: 12Mbps Full Speed USB v1.0 > ugen3.1: <Intel> at usbus3 > ugen4.1: <Intel> at usbus4 > uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 > uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 > ugen5.1: <Intel> at usbus5 > uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 > usbus6: 12Mbps Full Speed USB v1.0 > usbus7: 480Mbps High Speed USB v2.0 > ugen6.1: <Intel> at usbus6 > uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 > ugen7.1: <Intel> at usbus7 > uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7 > ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 > ada0: <ST9750420AS 0001SDM5> ATA-8 SATA 2.x device > ada0: Serial Number 5WS0F7XC > ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) > ada0: Command Queueing enabled > ada0: 715404MB (1465149168 512 byte sectors: 16H 63S/T 16383C) > ada0: quirks=0x1<4K> > ada0: Previously was known as ad4 > ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 > ada1: <ST9750420AS 0001SDM5> ATA-8 SATA 2.x device > ada1: Serial Number 5WS0FD86 > ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) > ada1: Command Queueing enabled > ada1: 715404MB (1465149168 512 byte sectors: 16H 63S/T 16383C) > ada1: quirks=0x1<4K> > ada1: Previously was known as ad6 > random: unblocking device. > SMP: AP CPU #1 Launched! > Timecounter "TSC-low" frequency 1130525891 Hz quality 1000 > uhub0: 2 ports with 2 removable, self powered > uhub1: 2 ports with 2 removable, self powered > uhub2: 2 ports with 2 removable, self powered > uhub4: 2 ports with 2 removable, self powered > uhub5: 2 ports with 2 removable, self powered > uhub6: 2 ports with 2 removable, self powered > cd0 at ahcich5 bus 0 scbus3 target 0 lun 0 > cd0: <HL-DT-ST DVDRAM GSA-T50F TP01> Removable CD-ROM SCSI-0 device > cd0: Serial Number K00893F1713 > cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytes) > cd0: Attempt to query device size failed: NOT READY, Medium not present > uhub3: 6 ports with 6 removable, self powered > uhub7: 6 ports with 6 removable, self powered > Root mount waiting for: usbus3 > ugen3.2: <Chicony Electronics Co., Ltd.> at usbus3 > Trying to mount root from ufs:/dev/ada1p2 [rw]... > wlan0: Ethernet address: 00:21:6b:71:7d:36 > iwn0: iwn_read_firmware: ucode rev=0x08530501 > iwn0: iwn_read_firmware: ucode rev=0x08530501 > pid 1061 (cinnamon), uid 1001: exited on signal 6 (core dumped) > pid 1085 (cinnamon), uid 1001: exited on signal 10 (core dumped) > pid 1090 (cinnamon), uid 1001: exited on signal 11 (core dumped) > pid 1101 (cinnamon), uid 1001: exited on signal 11 (core dumped) > wlan0: link state changed to DOWN > Waiting (max 60 seconds) for system process `vnlru' to stop...done > Waiting (max 60 seconds) for system process `bufdaemon' to stop...done > Waiting (max 60 seconds) for system process `syncer' to stop... > Syncing disks, vnodes remaining...18 6 5 3 3 0 1 0 0 done > All buffers synced. > Copyright (c) 1992-2015 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 11.0-CURRENT #0 r279013: Thu Feb 19 22:30:02 EST 2015 > root@Mizraim:/usr/obj/usr/src/sys/ZENNLA amd64 > FreeBSD clang version 3.5.1 (tags/RELEASE_351/final 225668) 20150115 > VT: running with driver "vga". > module_register: module pci/mskc already exists! > Module pci/mskc failed to register: 17 > module_register: module mskc/msk already exists! > Module mskc/msk failed to register: 17 > module_register: module msk/miibus already exists! > Module msk/miibus failed to register: 17 > CPU: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz (2261.05-MHz K8-class > CPU) > Origin="GenuineIntel" Id=0x10676 Family=0x6 Model=0x17 Stepping=6 > > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > > Features2=0x8e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1> > AMD Features=0x20100800<SYSCALL,NX,LM> > AMD Features2=0x1<LAHF> > VT-x: HLT,PAUSE > TSC: P-state invariant, performance statistics > real memory = 4294967296 (4096 MB) > avail memory = 4076457984 (3887 MB) > Event timer "LAPIC" quality 400 > ACPI APIC Table: <PTLTD APIC > > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs > FreeBSD/SMP: 1 package(s) x 2 core(s) > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 1 > ioapic0 <Version 2.0> irqs 0-23 on motherboard > random: entropy device infrastructure driver > random: selecting highest priority adaptor <Dummy> > kbd1 at kbdmux0 > module_register_init: MOD_LOAD (vesa, 0xffffffff80e77bc0, 0) error 19 > netmap: loaded module > random: SOFT: yarrow init() > random: selecting highest priority adaptor <Yarrow> > vtvga0: <VT VGA driver> on motherboard > acpi0: <GATEWA SYSTEM> on motherboard > acpi0: Power Button (fixed) > Timecounter "HPET" frequency 14318180 Hz quality 950 > Event timer "HPET" frequency 14318180 Hz quality 450 > Event timer "HPET1" frequency 14318180 Hz quality 440 > Event timer "HPET2" frequency 14318180 Hz quality 440 > Event timer "HPET3" frequency 14318180 Hz quality 440 > cpu0: <ACPI CPU> on acpi0 > cpu1: <ACPI CPU> on acpi0 > atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 > atrtc0: Warning: Couldn't map I/O. > Event timer "RTC" frequency 32768 Hz quality 0 > attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 > Timecounter "i8254" frequency 1193182 Hz quality 0 > Event timer "i8254" frequency 1193182 Hz quality 100 > Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 > acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 > pci1: <ACPI PCI bus> on pcib1 > vgapci0: <VGA-compatible display> port 0x2000-0x207f mem > 0xf2000000-0xf2ffffff,0xd0000000-0xdfffffff,0xf0000000-0xf1ffffff irq 16 at > device 0.0 on pci1 > nvidia0: <GeForce 9800M GTS> on vgapci0 > vgapci0: child nvidia0 requested pci_enable_io > vgapci0: child nvidia0 requested pci_enable_io > vgapci0: Boot video device > uhci0: <Intel 82801I (ICH9) USB controller> port 0x1800-0x181f irq 20 at > device 26.0 on pci0 > usbus0 on uhci0 > uhci1: <Intel 82801I (ICH9) USB controller> port 0x1820-0x183f irq 20 at > device 26.1 on pci0 > usbus1 on uhci1 > uhci2: <Intel 82801I (ICH9) USB controller> port 0x1840-0x185f irq 20 at > device 26.2 on pci0 > usbus2 on uhci2 > ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xf3504800-0xf3504bff > irq 20 at device 26.7 on pci0 > usbus3: EHCI version 1.0 > usbus3 on ehci0 > hdac0: <Intel 82801I HDA Controller> mem 0xf3500000-0xf3503fff irq 21 at > device 27.0 on pci0 > pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 > pci2: <ACPI PCI bus> on pcib2 > mskc0: <Marvell Yukon 88E8071 Gigabit Ethernet> port 0x3000-0x30ff mem > 0xf3000000-0xf3003fff irq 16 at device 0.0 on pci2 > msk0: <Marvell Technology Group Ltd. Yukon EX Id 0xb5 Rev 0x02> on mskc0 > msk0: Using defaults for TSO: 65518/35/2048 > msk0: Ethernet address: 00:1d:72:ed:56:80 > miibus0: <MII bus> on msk0 > e1000phy0: <Marvell 88E1149 Gigabit PHY> PHY 0 on miibus0 > e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, > 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, > auto-flow > pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 > pci3: <ACPI PCI bus> on pcib3 > pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 > pci4: <ACPI PCI bus> on pcib4 > iwn0: <Intel WiFi Link 5100> mem 0xf3100000-0xf3101fff irq 18 at device 0.0 > on pci4 > pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 > pci5: <ACPI PCI bus> on pcib5 > uhci3: <Intel 82801I (ICH9) USB controller> port 0x1860-0x187f irq 23 at > device 29.0 on pci0 > usbus4 on uhci3 > uhci4: <Intel 82801I (ICH9) USB controller> port 0x1880-0x189f irq 17 at > device 29.1 on pci0 > usbus5 on uhci4 > uhci5: <Intel 82801I (ICH9) USB controller> port 0x18a0-0x18bf irq 18 at > device 29.2 on pci0 > usbus6 on uhci5 > ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xf3504c00-0xf3504fff > irq 23 at device 29.7 on pci0 > usbus7: EHCI version 1.0 > usbus7 on ehci1 > pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > pci13: <ACPI PCI bus> on pcib6 > pci13: <serial bus, FireWire> at device 6.0 (no driver attached) > sdhci_pci0: <Generic SD HCI> mem 0xf3202800-0xf32028ff irq 22 at device 6.2 > on pci13 > sdhci_pci0: 1 slot(s) allocated > pci13: <mass storage> at device 6.3 (no driver attached) > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > ahci0: <Intel ICH9M AHCI SATA controller> port > 0x18f0-0x18f7,0x18e4-0x18e7,0x18e8-0x18ef,0x18e0-0x18e3,0x18c0-0x18df mem > 0xf3504000-0xf35047ff irq 19 at device 31.2 on pci0 > ahci0: AHCI v1.20 with 4 3Gbps ports, Port Multiplier supported > ahcich0: <AHCI channel> at channel 0 on ahci0 > ahcich1: <AHCI channel> at channel 1 on ahci0 > ahcich4: <AHCI channel> at channel 4 on ahci0 > ahcich5: <AHCI channel> at channel 5 on ahci0 > acpi_lid0: <Control Method Lid Switch> on acpi0 > acpi_button0: <Sleep Button> on acpi0 > acpi_tz0: <Thermal Zone> on acpi0 > acpi_tz1: <Thermal Zone> on acpi0 > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: [GIANT-LOCKED] > psm0: model Generic PS/2 mouse, device ID 0 > battery0: <ACPI Control Method Battery> on acpi0 > acpi_acad0: <AC Adapter> on acpi0 > orm0: <ISA Option ROM> at iomem 0xce000-0xcf7ff on isa0 > ppc0: cannot reserve I/O port range > coretemp0: <CPU On-Die Thermal Sensors> on cpu0 > est0: <Enhanced SpeedStep Frequency Control> on cpu0 > coretemp1: <CPU On-Die Thermal Sensors> on cpu1 > est1: <Enhanced SpeedStep Frequency Control> on cpu1 > usbus0: 12Mbps Full Speed USB v1.0 > Timecounters tick every 1.000 msec > hdacc0: <Conexant CX20561 (Hermosa) HDA CODEC> at cad 0 on hdac0 > hdaa0: <Conexant CX20561 (Hermosa) Audio Function Group> at nid 1 on hdacc0 > pcm0: <Conexant CX20561 (Hermosa) (Analog)> at nid 26 and 23,29 on hdaa0 > pcm1: <Conexant CX20561 (Hermosa) (Rear Analog Headphones)> at nid 22 on > hdaa0 > pcm2: <Conexant CX20561 (Hermosa) (Ext-Rear Digital)> at nid 28 on hdaa0 > hdacc1: <Conexant (0x2c06) HDA CODEC> at cad 1 on hdac0 > unknown: <Conexant (0x2c06) HDA CODEC Modem Function Group> at nid 2 on > hdacc1 (no driver attached) > hdacc2: <NVIDIA MCP78 HDA CODEC> at cad 2 on hdac0 > hdaa1: <NVIDIA MCP78 Audio Function Group> at nid 1 on hdacc2 > pcm3: <NVIDIA MCP78 (Digital)> at nid 5 on hdaa1 > usbus1: 12Mbps Full Speed USB v1.0 > usbus2: 12Mbps Full Speed USB v1.0 > ugen0.1: <Intel> at usbus0 > ugen1.1: <Intel> at usbus1 > uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 > uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 > ugen2.1: <Intel> at usbus2 > uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 > usbus3: 480Mbps High Speed USB v2.0 > usbus4: 12Mbps Full Speed USB v1.0 > usbus5: 12Mbps Full Speed USB v1.0 > ugen3.1: <Intel> at usbus3 > ugen4.1: <Intel> at usbus4 > uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 > ugen5.1: <Intel> at usbus5 > uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 > uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 > usbus6: 12Mbps Full Speed USB v1.0 > usbus7: 480Mbps High Speed USB v2.0 > ugen6.1: <Intel> at usbus6 > uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 > ugen7.1: <Intel> at usbus7 > uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7 > ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 > ada0: <ST9750420AS 0001SDM5> ATA-8 SATA 2.x device > ada0: Serial Number 5WS0F7XC > ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) > ada0: Command Queueing enabled > ada0: 715404MB (1465149168 512 byte sectors: 16H 63S/T 16383C) > ada0: quirks=0x1<4K> > ada0: Previously was known as ad4 > ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 > ada1: <ST9750420AS 0001SDM5> ATA-8 SATA 2.x device > ada1: Serial Number 5WS0FD86 > ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) > ada1: Command Queueing enabled > ada1: 715404MB (1465149168 512 byte sectors: 16H 63S/T 16383C) > ada1: quirks=0x1<4K> > ada1: Previously was known as ad6 > random: unblocking device. > SMP: AP CPU #1 Launched! > Timecounter "TSC-low" frequency 1130523230 Hz quality 1000 > uhub0: 2 ports with 2 removable, self powered > uhub1: 2 ports with 2 removable, self powered > uhub2: 2 ports with 2 removable, self powered > uhub4: 2 ports with 2 removable, self powered > uhub5: 2 ports with 2 removable, self powered > uhub6: 2 ports with 2 removable, self powered > cd0 at ahcich5 bus 0 scbus3 target 0 lun 0 > cd0: <HL-DT-ST DVDRAM GSA-T50F TP01> Removable CD-ROM SCSI-0 device > cd0: Serial Number K00893F1713 > cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytes) > cd0: Attempt to query device size failed: NOT READY, Medium not present > uhub3: 6 ports with 6 removable, self powered > Root mount waiting for: usbus7 usbus3 > uhub7: 6 ports with 6 removable, self powered > ugen3.2: <Chicony Electronics Co., Ltd.> at usbus3 > Trying to mount root from ufs:/dev/ada1p2 [rw]... > pid 1028 (cinnamon), uid 1001: exited on signal 11 (core dumped) > pid 1058 (cinnamon), uid 1001: exited on signal 11 (core dumped) > pid 1062 (cinnamon), uid 1001: exited on signal 10 (core dumped) > pid 1112 (cinnamon), uid 1001: exited on signal 11 (core dumped) > pid 1136 (cinnamon), uid 1001: exited on signal 11 (core dumped) > pid 1141 (cinnamon), uid 1001: exited on signal 6 (core dumped) > msk0: watchdog timeout > msk0: link state changed to DOWN > msk0: link state changed to UP > msk0: watchdog timeout > msk0: link state changed to DOWN > msk0: link state changed to UP > msk0: watchdog timeout > msk0: link state changed to DOWN > msk0: link state changed to UP > msk0: watchdog timeout > msk0: link state changed to DOWN > msk0: link state changed to UP > > > ifconfig > > msk0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 > > options=c009b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,VLAN_HWTSO,LINKSTATE> > ether 00:1d:72:ed:56:80 > inet 10.0.0.2 netmask 0xffffff00 broadcast 10.0.0.255 > nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> > media: Ethernet autoselect (1000baseT > <full-duplex,flowcontrol,rxpause,txpause>) > status: active > iwn0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 2290 > ether 00:21:6b:71:7d:36 > nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> > media: IEEE 802.11 Wireless Ethernet autoselect (autoselect) > status: no carrier > lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 > options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6> > inet6 ::1 prefixlen 128 > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 > inet 127.0.0.1 netmask 0xff000000 > nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> > groups: lo > > > pciconf > > > mskc0@pci0:2:0:0: class=0x020000 card=0x0696107b chip=0x436b11ab > rev=0x16 hdr=0x00 > vendor = 'Marvell Technology Group Ltd.' > device = '88E8071 PCI-E Gigabit Ethernet Controller' > class = network > subclass = ethernet > _______________________________________________ > freebsd-current@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org" I have the same problem with my Marvell Yukon 2. Working fine in 10.0, now broken in 10.1. Regards, David.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?54EADE18.3030804>