Date: Thu, 13 Jul 2000 18:06:11 +0200 From: torsten <T.Borchert@PowerOnline.net> To: freebsd-questions@freebsd.org Subject: can't disklabel ad3 Message-ID: <396DE8F3.B6C6D98E@PowerOnline.net>
next in thread | raw e-mail | index | archive | help
Hi everybody,
I can't get working my 3th hard disk under FreeBSD 4.0 Release.
(under Linux I can work with this disk).
Can anybody help me ?
when I try to fdisk and disklabel disk ad3 I get the following
errors:
Jul 12 18:49:42 ALEX /kernel: ad3: WRITE command timeout - resetting
Jul 12 18:49:42 ALEX /kernel: ata1: resetting devices .. done
Jul 12 18:49:52 ALEX /kernel: ad3: WRITE command timeout - resetting
Jul 12 18:49:52 ALEX /kernel: ata1: resetting devices .. done
Jul 12 18:50:02 ALEX /kernel: ad3: WRITE command timeout - resetting
Jul 12 18:50:02 ALEX /kernel: ata1: resetting devices .. done
Here is the dmesg - output:
ALEX# dmesg
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights
reserved.
FreeBSD 4.0-RELEASE #2: Sun Jul 9 13:37:29 CEST 2000
root@ALEX:/usr/src/sys/compile/BAIKAL
Timecounter "i8254" frequency 1193182 Hz
CPU: Cyrix 6x86MX (150.00-MHz 686-class CPU)
Origin = "CyrixInstead" Id = 0x600 Stepping = 0 DIR=0x0451
Features=0x80a135<FPU,DE,TSC,MSR,CX8,PGE,CMOV,MMX>
real memory = 100663296 (98304K bytes)
config> di sn0
No such device: sn0
Invalid command or syntax. Type `?' for help.
config> di lnc0
No such device: lnc0
Invalid command or syntax. Type `?' for help.
config> di le0
No such device: le0
Invalid command or syntax. Type `?' for help.
config> di ie0
No such device: ie0
Invalid command or syntax. Type `?' for help.
config> di fe0
No such device: fe0
Invalid command or syntax. Type `?' for help.
config> di ed0
No such device: ed0
Invalid command or syntax. Type `?' for help.
config> di cs0
No such device: cs0
Invalid command or syntax. Type `?' for help.
config> di aic0
No such device: aic0
Invalid command or syntax. Type `?' for help.
config> di aha0
No such device: aha0
Invalid command or syntax. Type `?' for help.
config> di adv0
No such device: adv0
Invalid command or syntax. Type `?' for help.
config> q
avail memory = 94474240 (92260K bytes)
Preloaded elf kernel "kernel" at 0xc02ec000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc02ec09c.
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1
on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 7.2 irq 11
chip1: <Intel 82371AB Power management controller> port 0x5f00-0x5f0f at
device 7.3 on pci0
pci0: <ATI Mach64-GU graphics accelerator> at 9.0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
pcm0: <AD1816> at port 0x220-0x22f,0x388-0x38b,0x530-0x53f irq 5 drq 1,3
on isa0
unknown0: <TERRATEC SOUNDSYSTEM BASE 1> at port 0x330-0x331 irq 9 on
isa0
unknown1: <TERRATEC SOUNDSYSTEM BASE 1> at port 0x200-0x207 on isa0
unknown2: <TERRATEC SOUNDSYSTEM BASE 1> at port 0x590-0x597 on isa0
ad0: 14655MB <Maxtor 51536U3> [29777/16/63] at ata0-master using UDMA33
ad1: 8063MB <WDC AC28400R> [16383/16/63] at ata0-slave using UDMA33
ad3: 2014MB <ST32122A> [4092/16/63] at ata1-slave using UDMA33
acd0: CDROM <ATAPI 40X CDROM> at ata1-master using PIO4
Mounting root from ufs:/dev/ad0s2a
pid 213 (gnome-smproxy), uid 1000: exited on signal 11 (core dumped)
ad1s4: rejecting partition in BSD label: it isn't entirely within the
slice
ad1s4: start 12353985, end 16498754, size 4144770
ad1s4d: start 0, end 16514063, size 16514064
ad1s4: rejecting partition in BSD label: it isn't entirely within the
slice
ad1s4: start 12353985, end 16498754, size 4144770
ad1s4d: start 0, end 16514063, size 16514064
ad1s4: rejecting partition in BSD label: it isn't entirely within the
slice
ad1s4: start 12353985, end 16498754, size 4144770
ad1s4d: start 0, end 16514063, size 16514064
ad3: WRITE command timeout - resetting
ata1: resetting devices .. done
ad3: WRITE command timeout - resetting
ata1: resetting devices .. done
ad3: WRITE command timeout - resetting
ata1: resetting devices .. done
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?396DE8F3.B6C6D98E>