Date: Tue, 17 Oct 2006 12:44:22 -0700 From: John-Mark Gurney <gurney_j@resnet.uoregon.edu> To: Yuriy Tsibizov <Yuriy.Tsibizov@gfk.ru> Cc: current@freebsd.org Subject: Re: ASUS U5F hangs during pci bus probe Message-ID: <20061017194422.GK23971@funkthat.com> In-Reply-To: <78664C02FF341B4FAC63E561846E3BCC01F84E@ex.hhp.local> References: <78664C02FF341B4FAC63E561846E3BCC01F84E@ex.hhp.local>
next in thread | previous in thread | raw e-mail | index | archive | help
Yuriy Tsibizov wrote this message on Thu, Oct 12, 2006 at 12:27 +0400:
> I'm trying to netboot FreeBSD on this notebook (it's Intel Core Solo +
> Intel 945GM chipset).
> Unfortunatly it does not have serial ports and I can't get full verbose
> dmesg.
>
> Last lines are:
> pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
> pcib1: secondary bus 1
> pcib1: subordinate bus 1
> pcib1: i/o decode 0xb000-0xbfff
> pcib1: memory decode 0xfa600000-0xfa6fffff
> pcib1:prefetched decode 0xfff00000-0xfffff (yes, threr is only 5 'f's)
> pci1: <ACPI PCI bus> on pcib1
> pci1: physical bus=1
>
> after that it hangs.
>
> kernel is -CURRENT from yesterday morning.
> setting hint.acpi.0.disabled="1" does not help, and BIOS settings are
> very limited (it can only turn on/off onboard devices)
This is likely due to invalid VPD data on your system... Add a:
printf("reading vpd...\n");
to just before the comment:
/* init vpd reader */
if this is the last thing you see printed then it is due to the new
VPD code... I have identified on problem w/ the code, and have posted
the patch to cvs-all, if you are interested in testing it, I'll send
you a copy, though your problem could be different, and we need do some
debugging to find out what it is...
--
John-Mark Gurney Voice: +1 415 225 5579
"All that I will do, has been done, All that I have, has not."
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20061017194422.GK23971>