Date: Thu, 06 Apr 2006 16:08:18 +0200 From: nocturnal <nocturnal@swehack.se> To: freebsd-hardware@freebsd.org Subject: Adaptec Message-ID: <443520D2.6080406@swehack.se>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
--------------040703040802070203020204
Content-Type: text/plain; charset=windows-1252; format=flowed
Content-Transfer-Encoding: 8bit
Hi
I have a problem with a Dell PowerEdge SC1425 server but before i start
with the description i must mention that i have another Dell PowerEdge
SC1425 which was bought just a few weeks before this one with problems
and the Dell staff have compared Service Tags to determine that they are
identical except for a few things. The server without problems has two
SCSI disks in a RAID 1 array and less RAM than the server with problems
which has one SCSI disk without a RAID array. The machine with problems
also has 15000RPM SCSI disk and the machine without problems has two
10000 RPM disks. Those are the differences Dell staff have told me there
are. Both run FreeBSD 6.0-RELEASE installed from the same cd. The
machine with problems has even been installed twice using the same cd.
The problem is that the disk locks the whole system for 10-15 second
periods when reading or writing. After the system unlocks there is a
huge dump of an error message in syslog, i have attached the dump for
people to see.
The customer who owns the machine has a Dell support deal and they're
ready to replace the card because they've already replaced the disk
without any changes. The Dell tech just wanted me to send an e-mail to
the FreeBSD list first and see if this is a known problem, if not they
will simply replace the card but if it is a known problem in FreeBSD
then other actions must be taken.
Of course i don't think this is a software problem because we have the
other SC1425 server which is also running FreeBSD 6.0-RELEASE, same as
the server with problems. These SCSI read/write problems are unheard of
on the other server and it's working perfectly with FreeBSD and the RAID
1 array using SCSI disks.
==== DATA FROM DELL ====
Overview
The Adaptec U320 SCSI RAID 0 or 1 is a high-performance 64-bit/133-MHz
PCI-X, dualchannel Ultra320 SCSI card with integrated RAID 0 and 1. It
provides data protection at the fastest SCSI speeds available up to 640
MB/sec total throughput using Ultra320 SCSI Low Voltage Differential
(LVD) devices.
NOTE: The Adaptec 39320A/U320 SCSI RAID 0 or 1 is only
supported on the WS 380. For more information about the Adaptec
39320/39320A – U320 SCSI for Enterprise servers click here.
The Adaptec U320 SCSI RAID 0 or 1 controller has the following features:
· Two independent bootable SCSI channels
· 15 multifunction devices per channel
· Can be utilized with SCSI tape drives
· Mixing of LVD and SE devices, with associated performance
degradation. (HVD devices are not supported.)
· Wide or Narrow SCSI data path
· CRC-32 error detection for Ultra320/Ultra160 modes during data
I/O phases in LVD mode only
· Automatic termination control
· Manual termination override for multi-initiator environments
· Fuse-protected (up to 1.25 A) termination power circuit
· SCSI card and devices are configurable using SCSISelect®, the
BIOS Configuration utility
· Linux HostRAID support will not be available for this controller
If the user wants RAID refer to the md documentation here: Linux
software RAID
· Linux support will be limited to the aic7xxx driver, SCSI mode only.
· The Adaptec 39320A/U320 SCSI RAID 0 or 1 is known as the
"Adaptec 39320A" for workstation systems; however, both may have the
same part number.
------------------------------------------------
Adaptec 39320/39320A Features
The Adaptec 39320/39320A enables you to connect up to 30 SCSI
devices-such as Ultra320/Ultra160 hard disk drives, scanners, and CD-ROM
drives-to any Intel-based or Intel compatible system with 64- or 32-bit
PCI/PCI-X expansion slots. Ultra320 is an enhanced SCSI technology that
transfers data at up to 640 MB/sec. Ultra320 SCSI allows cable length of
up to 12 meters for optimal connectivity and flexibility.
The Adaptec 39320/39320A has two independent SCSI channels, each with a
maximum throughput of 320 MB/sec.
For optimum performance and throughput, the Adaptec 39320/39320A card
must be installed in a 64-bit, 133-MHz, PCI-X slot with Ultra320
devices. However, the HBA is fully functional in legacy PCI systems
because it supports conventional 33- and 66-MHz PCI transactions in both
32- and 64-bit modes. The HBA also supports legacy SCSI operations, such
as SPI-3 Double Transition (DT) clocking.
The Adaptec 39320/39320A card is backwards compatible with virtually any
legacy Ultra2, Ultra, and Single-Ended (SE) SCSI device, except High
Voltage Differential (HVD) devices. However, performance is degraded to
SE speed, and SE cable length restrictions must be adhered to, when an
SE device is connected to the bus. Dual-independent channels allow LVD
and SE devices to operate separately at peak performance.
Configuration Features
Specification Feature
Interface Channels Two independent SCSI channels
Devices supported per channel 15
Host Interface PCI-X 133 MHz
Storage Interface Ultra320 SCSI
Multiple logical drives/per controller 2
Event logging Controllers supported in system System Event Log and
Controller Event Log
Online Capacity Expansion Yes
Flashable firmware Yes
Hot swap devices supported Yes
Supported Devices LVD, Ultra320, Ultra160, Ultra2, Wide SE Device
Support such as hard disk drives, and non-hard-disk drives, such as CD
and tape drives.
Mixed capacity hard disk support Yes
Internal Connectors Two 68-pin Internal LVD/SE connector
External Connectors One 68-pin External LVD/SE connector on the
39320 and two 68-pin external LVD/SE connectors on the 39320A
Disk Configuration Features
Specification Feature
Supported hard disk Capacity Maximum 2 TB
--------------------------------------------------------------
--
Med vänliga hälsningar
Stefan Midjich aka nocturnal
[Swehack] http://swehack.se
--------------040703040802070203020204
Content-Type: text/plain;
name="scsi_error_dump3.txt"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="scsi_error_dump3.txt"
ahd0: Recovery Initiated - Card was not paused
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd0: Dumping Card State at program address 0x24 Mode 0x22
INTSTAT[0x0] SELOID[0x0] SELID[0x0] HS_MAILBOX[0x0]
INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0] SAVED_MODE[0x11]
DFFSTAT[0x33]:(CURRFIFO_NONE|FIFO0FREE|FIFO1FREE)
SCSISIGI[0x26]:(P_DATAOUT_DT|REQI|BSYI) SCSIPHASE[0x0]
SCSIBUS[0x4] LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE)
SCSISEQ0[0x40]:(ENSELO) SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI)
SEQCTL0[0x0] SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0]
QFREEZE_COUNT[0x3] KERNEL_QFREEZE_COUNT[0x3] MK_MESSAGE_SCB[0x8e]
MK_MESSAGE_SCSIID[0x7] SSTAT0[0x10]:(SELINGO) SSTAT1[0x8]:(BUSFREE)
SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO)
LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x80]:(PACKETIZED)
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0xc0]
SCB Count = 144 CMDS_PENDING = 128 LASTSCB 0x8d CURRSCB 0x10 NEXTSCB 0x5f
qinstart = 5949 qinfifonext = 5949
QINFIFO:
WAITING_TID_QUEUES:
0 ( 0x66 0x77 0x14 0xb 0x3 0x79 0x76 0x7d 0x69 0x3a 0x39 0x1b 0x19 0x6c 0x8e 0xc 0x5 0x12 0x7a 0x6d 0x6f 0x51 0x6 0x6a 0x2 0xd 0x61 0x3d 0x65 0x2a 0x1c 0x1a 0x67 0x17 0x74 0x23 0xa 0x7 0x37 0x68 0x44 0x53 0x57 0x7f 0x55 0x2e 0x2d 0x7e 0x7c 0x7b 0x6b 0x50 0x58 0x16 0x20 0x27 0x1d 0x52 0x63 0x24 0x59 0x25 0x5b 0x3e 0x60 0x41 0x5c 0x36 0x56 0x6e 0x8b 0x5a 0x64 0x21 0x54 0x75 0x8d 0x10 0x5f 0x38 0x15 0x5d 0x78 0x46 0x62 0x43 0x18 0x31 0x22 0x4c 0x3b 0x2c 0x1 0x30 0x47 0x48 0x40 0x4f 0x32 0x45 0x2f 0x4 0x5e 0x42 0x8 0x8c 0x11 0x29 0x3f 0x9 0x4d 0x35 0x2b 0x33 0x3c 0x13 0x4a 0x34 0xf 0x0 0x4e 0x49 0x1f 0x4b 0xe 0x1e 0x26 0x28 )
Pending list:
40 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
38 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
30 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
14 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
75 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
31 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
73 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
78 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
0 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
15 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
52 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
74 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
19 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
60 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
51 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
43 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
53 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
77 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
9 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
63 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
41 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
17 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
140 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
8 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
66 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
94 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
4 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
47 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
69 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
50 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
79 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
64 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
72 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
71 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
48 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
1 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
44 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
59 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
76 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
34 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
49 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
24 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
67 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
98 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
70 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
120 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
93 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
21 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
56 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
95 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
16 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
141 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
117 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
84 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
33 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
100 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
90 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
139 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
110 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
86 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
54 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
92 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
65 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
96 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
62 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
91 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
37 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
89 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
36 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
99 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
82 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
29 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
39 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
32 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
22 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
88 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
80 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
107 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
123 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
124 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
126 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
45 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
46 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
85 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
127 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
87 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
83 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
68 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
104 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
55 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
7 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
10 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
35 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
116 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
23 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
103 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
26 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
28 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
42 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
101 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
61 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
97 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
13 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
2 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
106 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
6 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
81 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
111 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
109 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
122 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
18 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
5 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
12 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
142 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
108 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
25 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
27 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
57 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
58 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
105 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
125 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
118 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
121 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
3 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
11 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
20 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
119 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
102 FIFO_USE[0x0] SCB_CONTROL[0x60]:(TAG_ENB|DISCENB) SCB_SCSIID[0x7]
Total 128
Kernel Free SCB list: 115 143 112 113 114 138 137 136 135 134 133 132 131 130 129 128
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
ahd0: FIFO0 Free, LONGJMP == 0x8276, SCB 0x66
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x4]:(DIRECTION) DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
ahd0: FIFO1 Free, LONGJMP == 0x8063, SCB 0xe
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
LQIN: 0x8 0x0 0x0 0x66 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
ahd0: LQISTATE = 0x1, LQOSTATE = 0x19, OPTIONMODE = 0x42
ahd0: OS_SPACE_CNT = 0x1f MAXCMDCNT = 0x4d
ahd0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
SIMODE0[0xc]:(ENOVERRUN|ENIOERR)
CCSCBCTL[0x4]:(CCSCBDIR)
ahd0: REG0 == 0x28, SINDEX = 0x102, DINDEX = 0x102
ahd0: SCBPTR == 0x26, SCB_NEXT == 0x28, SCB_NEXT2 == 0xff32
CDB 2a 0 0 2e ca 7f
STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
(da0:ahd0:0:0:0): SCB 11 - timed out
(da0:ahd0:0:0:0): Other SCB Timeout
(da0:ahd0:0:0:0): No other SCB worth waiting for...
ahd0: Issued Channel A Bus Reset. 128 SCBs aborted
Copied 18 bytes of sense data offset 12: 0x70 0x0 0x6 0x0 0x0 0x0 0x0 0xa 0x0 0x0 0x0 0x0 0x29 0x2 0x2 0x0 0x0 0x0
(da0:ahd0:0:0:0): WRITE(06). CDB: a 15 cf 5f 20 0
(da0:ahd0:0:0:0): CAM Status: SCSI Status Error
(da0:ahd0:0:0:0): SCSI Status: Check Condition
(da0:ahd0:0:0:0): UNIT ATTENTION asc:29,2
(da0:ahd0:0:0:0): Scsi bus reset occurred field replaceable unit: 2
(da0:ahd0:0:0:0): Retrying Command (per Sense Data)
--------------040703040802070203020204--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?443520D2.6080406>