Date: Wed, 12 Aug 2009 18:12:33 +0300 From: Konstantin Dimitrov <kosio.dimitrov@gmail.com> To: freebsd-multimedia@freebsd.org Subject: Re: No sound with 7.2-RELEASE amd64, Delta 66, envy24 Message-ID: <8103ad500908120812n54fb554dv4ed4b1e3e6783a15@mail.gmail.com> In-Reply-To: <20090812132128.GA99440@logik.internal.network> References: <20090812132128.GA99440@logik.internal.network>
next in thread | previous in thread | raw e-mail | index | archive | help
hi, your card is recognized as: pcm0: <Envy24 audio (Generic)> instead as the correct: pcm0: <Envy24 audio (M Audio Delta 66)> and thus the wrong initialization of the card is done. so, check if your snd_envy24.ko has support for M-Audio Delta 66: strings snd_envy24.ko | grep Delta if Delta 66 is not listed in the output then you just need to update the driver, otherwise the problem is something more complex, because your card reports correct device IDs for M-Audio Delta 66: SubVendorID: 0xd632, SubDeviceID: 0x1412 and then it should be recognized as M-Audio Delta 66. in any case mail what your checks show. --konstantin On Wed, Aug 12, 2009 at 4:21 PM, <org.freebsd.freebsd-multimedia@coreland.ath.cx> wrote: > Resent. List seems to have swallowed the original. > > -- > > Hi. > > I recently installed a Delta 66 PCI card (taken from a working machine) > but can get no sound from it. > > Programs using the device don't give any errors. > > $ kldstat > Id Refs Address =A0 =A0 =A0 =A0 =A0 =A0Size =A0 =A0 Name > =A01 =A0 22 0xffffffff80100000 bd23e0 =A0 kernel > =A02 =A0 =A01 0xffffffff80cd3000 1bf0 =A0 =A0 coretemp.ko > =A03 =A0 =A02 0xffffffff80cd6000 22768 =A0 =A0drm.ko > =A04 =A0 =A01 0xffffffff80cf9000 71570 =A0 =A0radeon.ko > =A05 =A0 =A01 0xffffffff9be22000 8117e =A0 =A0zfs.ko > =A06 =A0 =A01 0xffffffff9bea4000 1125 =A0 =A0 opensolaris.ko > =A07 =A0 =A01 0xffffffff9bea6000 978 =A0 =A0 =A0pflog.ko > =A08 =A0 =A01 0xffffffff9bea7000 2ae8c =A0 =A0pf.ko > =A09 =A0 =A01 0xffffffff9bed2000 1fce =A0 =A0 nullfs.ko > 10 =A0 =A01 0xffffffff9bed4000 1744 =A0 =A0 fdescfs.ko > 11 =A0 =A01 0xffffffff9bed6000 35c0 =A0 =A0 linprocfs.ko > 12 =A0 =A01 0xffffffff9beda000 18b30 =A0 =A0linux.ko > > $ sudo kldload snd_envy24 > $ kldstat > Id Refs Address =A0 =A0 =A0 =A0 =A0 =A0Size =A0 =A0 Name > =A01 =A0 25 0xffffffff80100000 bd23e0 =A0 kernel > =A02 =A0 =A01 0xffffffff80cd3000 1bf0 =A0 =A0 coretemp.ko > =A03 =A0 =A02 0xffffffff80cd6000 22768 =A0 =A0drm.ko > =A04 =A0 =A01 0xffffffff80cf9000 71570 =A0 =A0radeon.ko > =A05 =A0 =A01 0xffffffff9be22000 8117e =A0 =A0zfs.ko > =A06 =A0 =A01 0xffffffff9bea4000 1125 =A0 =A0 opensolaris.ko > =A07 =A0 =A01 0xffffffff9bea6000 978 =A0 =A0 =A0pflog.ko > =A08 =A0 =A01 0xffffffff9bea7000 2ae8c =A0 =A0pf.ko > =A09 =A0 =A01 0xffffffff9bed2000 1fce =A0 =A0 nullfs.ko > 10 =A0 =A01 0xffffffff9bed4000 1744 =A0 =A0 fdescfs.ko > 11 =A0 =A01 0xffffffff9bed6000 35c0 =A0 =A0 linprocfs.ko > 12 =A0 =A01 0xffffffff9beda000 18b30 =A0 =A0linux.ko > 13 =A0 =A03 0xffffffff9bef3000 2e546 =A0 =A0sound.ko > 14 =A0 =A01 0xffffffff9bf22000 4722 =A0 =A0 snd_envy24.ko > 15 =A0 =A01 0xffffffff9bf27000 b8a =A0 =A0 =A0snd_spicds.ko > > $ cat /dev/sndstat > FreeBSD Audio Driver (newpcm: 64bit 2007061600/amd64) > Installed devices: > pcm0: <Envy24 audio (Generic)> at io 0xac00:32,0xa880:16,0xa800:16,0xa480= :64 irq 17 [MPSAFE] (5p:1v/4r:1v channels duplex default) > > $ ls -alF /dev/dsp > crw-rw-rw- =A01 root =A0wheel =A0 =A00, 151 Aug 12 12:42 /dev/dsp > > $ mixer > Mixer vol =A0 =A0 =A0is currently set to =A075:75 > Mixer bass =A0 =A0 is currently set to =A0 0:0 > Mixer treble =A0 is currently set to =A0 0:0 > Mixer synth =A0 =A0is currently set to =A0 0:0 > Mixer pcm =A0 =A0 =A0is currently set to =A075:75 > Mixer speaker =A0is currently set to =A0 0:0 > Mixer line =A0 =A0 is currently set to =A075:75 > Mixer mic =A0 =A0 =A0is currently set to =A0 0:0 > Mixer cd =A0 =A0 =A0 is currently set to =A0 0:0 > Mixer mix =A0 =A0 =A0is currently set to =A0 0:0 > > Programs appear to be able to open /dev/dsp* and use it without errors - = I just > get no sound. > > $ dmesg > Copyright (c) 1992-2009 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > =A0 =A0 =A0 =A0The Regents of the University of California. All rights re= served. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 7.2-RELEASE-p2 #0: Wed Jun 24 00:14:35 UTC 2009 > =A0 =A0root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel(R) Core(TM) i7 CPU =A0 =A0 =A0 =A0 920 =A0@ 2.67GHz (2665.04-M= Hz K8-class CPU) > =A0Origin =3D "GenuineIntel" =A0Id =3D 0x106a4 =A0Stepping =3D 4 > =A0Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR= ,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > =A0Features2=3D0x98e3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR= ,PDCM,<b19>,<b20>,<b23>> > =A0AMD Features=3D0x28100800<SYSCALL,NX,RDTSCP,LM> > =A0AMD Features2=3D0x1<LAHF> > =A0Cores per package: 8 > =A0Logical CPUs per core: 2 > usable memory =3D 12862390272 (12266 MB) > avail memory =A0=3D 12424232960 (11848 MB) > ACPI APIC Table: <030409 APIC1411> > FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs > =A0cpu0 (BSP): APIC ID: =A00 > =A0cpu1 (AP/HT): APIC ID: =A01 > =A0cpu2 (AP): APIC ID: =A02 > =A0cpu3 (AP/HT): APIC ID: =A03 > =A0cpu4 (AP): APIC ID: =A04 > =A0cpu5 (AP/HT): APIC ID: =A05 > =A0cpu6 (AP): APIC ID: =A06 > =A0cpu7 (AP/HT): APIC ID: =A07 > ioapic0: Changing APIC ID to 8 > ioapic0 <Version 2.0> irqs 0-23 on motherboard > kbd1 at kbdmux0 > acpi0: <030409 RSDT1411> on motherboard > acpi0: [ITHREAD] > acpi0: Power Button (fixed) > acpi0: reservation of 0, a0000 (3) failed > acpi0: reservation of 100000, bff00000 (3) failed > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 > pci7: <ACPI PCI bus> on pcib1 > pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0 > pci6: <ACPI PCI bus> on pcib2 > vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xd0000000-0xdff= fffff,0xfbee0000-0xfbeeffff irq 16 at device 0.0 on pci6 > drm0: <ATI Radeon X1950> on vgapci0 > vgapci0: child drm0 requested pci_enable_busmaster > info: [drm] Initialized radeon 1.29.0 20080528 > vgapci1: <VGA-compatible display> mem 0xfbef0000-0xfbefffff at device 0.1= on pci6 > pcib3: <ACPI PCI-PCI bridge> at device 7.0 on pci0 > pci5: <ACPI PCI bus> on pcib3 > pci0: <base peripheral, interrupt controller> at device 16.0 (no driver a= ttached) > pci0: <base peripheral, interrupt controller> at device 16.1 (no driver a= ttached) > pci0: <base peripheral, interrupt controller> at device 20.0 (no driver a= ttached) > pci0: <base peripheral, interrupt controller> at device 20.1 (no driver a= ttached) > pci0: <base peripheral, interrupt controller> at device 20.2 (no driver a= ttached) > pci0: <base peripheral, interrupt controller> at device 20.3 (no driver a= ttached) > uhci0: <UHCI (generic) USB controller> port 0x7400-0x741f irq 16 at devic= e 26.0 on pci0 > uhci0: [GIANT-LOCKED] > uhci0: [ITHREAD] > usb0: <UHCI (generic) USB controller> on uhci0 > usb0: USB revision 1.0 > uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 > uhub0: 2 ports with 2 removable, self powered > uhci1: <UHCI (generic) USB controller> port 0x7480-0x749f irq 21 at devic= e 26.1 on pci0 > uhci1: [GIANT-LOCKED] > uhci1: [ITHREAD] > usb1: <UHCI (generic) USB controller> on uhci1 > usb1: USB revision 1.0 > uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 > uhub1: 2 ports with 2 removable, self powered > uhci2: <UHCI (generic) USB controller> port 0x7800-0x781f irq 19 at devic= e 26.2 on pci0 > uhci2: [GIANT-LOCKED] > uhci2: [ITHREAD] > usb2: <UHCI (generic) USB controller> on uhci2 > usb2: USB revision 1.0 > uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 > uhub2: 2 ports with 2 removable, self powered > ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfb9f6000-0xfb9f63ff irq = 18 at device 26.7 on pci0 > ehci0: [GIANT-LOCKED] > ehci0: [ITHREAD] > usb3: EHCI version 1.0 > usb3: companion controllers, 2 ports each: usb0 usb1 usb2 > usb3: <EHCI (generic) USB 2.0 controller> on ehci0 > usb3: USB revision 2.0 > uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3 > uhub3: 6 ports with 6 removable, self powered > uhub4: <NEC Corporation USB2.0 Hub Controller, class 9/0, rev 2.00/1.00, = addr 2> on uhub3 > uhub4: single transaction translator > uhub4: 4 ports with 4 removable, self powered > ums0: <Microsoft Basic Optical Mouse, class 0/0, rev 1.10/0.00, addr 3> o= n uhub4 > ums0: 3 buttons and Z dir. > ukbd0: <vendor 0x046a product 0x0021, class 0/0, rev 2.00/0.20, addr 4> o= n uhub4 > kbd2 at ukbd0 > uhid0: <vendor 0x046a product 0x0021, class 0/0, rev 2.00/0.20, addr 4> o= n uhub4 > pci0: <multimedia, HDA> at device 27.0 (no driver attached) > pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 > pci4: <ACPI PCI bus> on pcib4 > atapci0: <JMicron JMB363 SATA300 controller> port 0xdc00-0xdc07,0xd880-0x= d883,0xd800-0xd807,0xd480-0xd483,0xd400-0xd40f mem 0xfbdfe000-0xfbdfffff ir= q 16 at device 0.0 on pci4 > atapci0: [ITHREAD] > atapci0: AHCI called from vendor specific driver > atapci0: AHCI Version 01.00 controller with 2 ports detected > ata2: <ATA channel 0> on atapci0 > ata2: [ITHREAD] > ata3: <ATA channel 1> on atapci0 > ata3: [ITHREAD] > ata4: <ATA channel 2> on atapci0 > ata4: [ITHREAD] > pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0 > pci3: <ACPI PCI bus> on pcib5 > re0: <RealTek 8168/8168B/8168C/8168CP/8168D/8111B/8111C/8111CP PCIe Gigab= it Ethernet> port 0xc800-0xc8ff mem 0xfbcff000-0xfbcfffff,0xcfff0000-0xcfff= ffff irq 17 at device 0.0 on pci3 > re0: Using 1 MSI messages > re0: Chip rev. 0x3c000000 > re0: MAC rev. 0x00400000 > miibus0: <MII bus> on re0 > rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0 > rgephy0: =A010baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 10= 00baseT-FDX, auto > re0: Ethernet address: 00:e0:4d:b3:5b:bd > re0: [FILTER] > pcib6: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 > pci2: <ACPI PCI bus> on pcib6 > re1: <RealTek 8168/8168B/8168C/8168CP/8168D/8111B/8111C/8111CP PCIe Gigab= it Ethernet> port 0xb800-0xb8ff mem 0xfbbff000-0xfbbfffff,0xcfef0000-0xcfef= ffff irq 18 at device 0.0 on pci2 > re1: Using 1 MSI messages > re1: Chip rev. 0x3c000000 > re1: MAC rev. 0x00400000 > miibus1: <MII bus> on re1 > rgephy1: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus1 > rgephy1: =A010baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 10= 00baseT-FDX, auto > re1: Ethernet address: 00:e0:4d:b3:5b:be > re1: [FILTER] > uhci3: <UHCI (generic) USB controller> port 0x7880-0x789f irq 23 at devic= e 29.0 on pci0 > uhci3: [GIANT-LOCKED] > uhci3: [ITHREAD] > usb4: <UHCI (generic) USB controller> on uhci3 > usb4: USB revision 1.0 > uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4 > uhub5: 2 ports with 2 removable, self powered > uhci4: <UHCI (generic) USB controller> port 0x7c00-0x7c1f irq 19 at devic= e 29.1 on pci0 > uhci4: [GIANT-LOCKED] > uhci4: [ITHREAD] > usb5: <UHCI (generic) USB controller> on uhci4 > usb5: USB revision 1.0 > uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5 > uhub6: 2 ports with 2 removable, self powered > uhci5: <UHCI (generic) USB controller> port 0x8000-0x801f irq 18 at devic= e 29.2 on pci0 > uhci5: [GIANT-LOCKED] > uhci5: [ITHREAD] > usb6: <UHCI (generic) USB controller> on uhci5 > usb6: USB revision 1.0 > uhub7: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6 > uhub7: 2 ports with 2 removable, self powered > ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfb9fc000-0xfb9fc3ff irq = 23 at device 29.7 on pci0 > ehci1: [GIANT-LOCKED] > ehci1: [ITHREAD] > usb7: EHCI version 1.0 > usb7: companion controllers, 2 ports each: usb4 usb5 usb6 > usb7: <EHCI (generic) USB 2.0 controller> on ehci1 > usb7: USB revision 2.0 > uhub8: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb7 > uhub8: 6 ports with 6 removable, self powered > pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > pci1: <ACPI PCI bus> on pcib7 > pci1: <multimedia, audio> at device 6.0 (no driver attached) > fwohci0: <Texas Instruments TSB43AB22/A> mem 0xfbaff800-0xfbafffff,0xfbaf= 8000-0xfbafbfff irq 19 at device 7.0 on pci1 > fwohci0: [FILTER] > fwohci0: OHCI version 1.10 (ROM=3D1) > fwohci0: No. of Isochronous channels is 4. > fwohci0: EUI64 00:00:00:00:00:07:7b:3d > fwohci0: Phy 1394a available S400, 2 ports. > fwohci0: Link S400, max_rec 2048 bytes. > firewire0: <IEEE1394(FireWire) bus> on fwohci0 > dcons_crom0: <dcons configuration ROM> on firewire0 > dcons_crom0: bus_addr 0x198c000 > fwe0: <Ethernet over FireWire> on firewire0 > if_fwe0: Fake Ethernet address: 02:00:00:07:7b:3d > fwe0: Ethernet address: 02:00:00:07:7b:3d > fwip0: <IP over FireWire> on firewire0 > fwip0: Firewire address: 00:00:00:00:00:07:7b:3d @ 0xfffe00000000, S400, = maxrec 2048 > sbp0: <SBP-2/SCSI over FireWire> on firewire0 > fwohci0: Initiate bus reset > fwohci0: BUS reset > fwohci0: node_id=3D0xc800ffc0, gen=3D1, CYCLEMASTER mode > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > atapci1: <Intel ICH10 SATA300 controller> port 0x8c00-0x8c07,0x8880-0x888= 3,0x8800-0x8807,0x8480-0x8483,0x8400-0x840f,0x8080-0x808f irq 19 at device = 31.2 on pci0 > atapci1: [ITHREAD] > ata5: <ATA channel 0> on atapci1 > ata5: [ITHREAD] > ata6: <ATA channel 1> on atapci1 > ata6: [ITHREAD] > pci0: <serial bus, SMBus> at device 31.3 (no driver attached) > atapci2: <Intel ICH10 SATA300 controller> port 0x9c00-0x9c07,0x9880-0x988= 3,0x9800-0x9807,0x9480-0x9483,0x9400-0x940f,0x9080-0x908f irq 19 at device = 31.5 on pci0 > atapci2: [ITHREAD] > ata7: <ATA channel 0> on atapci2 > ata7: [ITHREAD] > ata8: <ATA channel 1> on atapci2 > ata8: [ITHREAD] > acpi_button0: <Power Button> on acpi0 > acpi_tz0: <Thermal Zone> on acpi0 > fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 = on acpi0 > fdc0: [FILTER] > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > atkbd0: [ITHREAD] > cpu0: <ACPI CPU> on acpi0 > ACPI Warning (tbutils-0243): Incorrect checksum in table [OEMB] - =A021, = should be 19 [20070320] > coretemp0: <CPU On-Die Thermal Sensors> on cpu0 > est0: <Enhanced SpeedStep Frequency Control> on cpu0 > p4tcc0: <CPU Frequency Thermal Control> on cpu0 > cpu1: <ACPI CPU> on acpi0 > coretemp1: <CPU On-Die Thermal Sensors> on cpu1 > est1: <Enhanced SpeedStep Frequency Control> on cpu1 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 14 > device_attach: est1 attach returned 6 > p4tcc1: <CPU Frequency Thermal Control> on cpu1 > cpu2: <ACPI CPU> on acpi0 > coretemp2: <CPU On-Die Thermal Sensors> on cpu2 > est2: <Enhanced SpeedStep Frequency Control> on cpu2 > p4tcc2: <CPU Frequency Thermal Control> on cpu2 > cpu3: <ACPI CPU> on acpi0 > coretemp3: <CPU On-Die Thermal Sensors> on cpu3 > est3: <Enhanced SpeedStep Frequency Control> on cpu3 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 14 > device_attach: est3 attach returned 6 > p4tcc3: <CPU Frequency Thermal Control> on cpu3 > cpu4: <ACPI CPU> on acpi0 > coretemp4: <CPU On-Die Thermal Sensors> on cpu4 > est4: <Enhanced SpeedStep Frequency Control> on cpu4 > p4tcc4: <CPU Frequency Thermal Control> on cpu4 > cpu5: <ACPI CPU> on acpi0 > coretemp5: <CPU On-Die Thermal Sensors> on cpu5 > est5: <Enhanced SpeedStep Frequency Control> on cpu5 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 14 > device_attach: est5 attach returned 6 > p4tcc5: <CPU Frequency Thermal Control> on cpu5 > cpu6: <ACPI CPU> on acpi0 > coretemp6: <CPU On-Die Thermal Sensors> on cpu6 > est6: <Enhanced SpeedStep Frequency Control> on cpu6 > p4tcc6: <CPU Frequency Thermal Control> on cpu6 > cpu7: <ACPI CPU> on acpi0 > coretemp7: <CPU On-Die Thermal Sensors> on cpu7 > est7: <Enhanced SpeedStep Frequency Control> on cpu7 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 14 > device_attach: est7 attach returned 6 > p4tcc7: <CPU Frequency Thermal Control> on cpu7 > ppc0: cannot reserve I/O port range > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=3D0x300> > sio0: configured irq 4 not in bitmap of probed irqs 0 > sio0: port may not be enabled > sio0: configured irq 4 not in bitmap of probed irqs 0 > sio0: port may not be enabled > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > sio0: type 8250 or not responding > sio0: [FILTER] > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > Timecounters tick every 1.000 msec > firewire0: 1 nodes, maxhop <=3D 0, cable IRM =3D 0 (me) > firewire0: bus manager 0 (me) > acd0: DVDR <TSSTcorp CDDVDW SH-S222A/SB01> at ata4-master UDMA66 > ad10: 76319MB <WDC WD800AAJS-00WAA0 58.01D58> at ata5-master SATA300 > ad11: 476940MB <WDC WD5001AALS-00L3B2 01.03B01> at ata5-slave SATA300 > ad12: 953869MB <WDC WD10EADS-00L5B1 01.01A01> at ata6-master SATA300 > ad14: 476940MB <WDC WD5001AALS-00L3B2 01.03B01> at ata7-master SATA300 > GEOM_LABEL: Label for provider ad10s1a is ufsid/49dd1626d599346c. > ad16: 476940MB <WDC WD5001AALS-00L3B2 01.03B01> at ata8-master SATA300 > GEOM_LABEL: Label for provider ad10s1d is ufsid/49dd1626c888923e. > GEOM_LABEL: Label for provider ad10s1e is ufsid/49dd16280e8a20d0. > GEOM_LABEL: Label for provider ad10s1f is ufsid/49dd1626ed87573c. > SMP: AP CPU #7 Launched! > SMP: AP CPU #4 Launched! > SMP: AP CPU #5 Launched! > SMP: AP CPU #1 Launched! > SMP: AP CPU #3 Launched! > SMP: AP CPU #6 Launched! > SMP: AP CPU #2 Launched! > Trying to mount root from ufs:/dev/ad10s1a > GEOM_LABEL: Label ufsid/49dd1626d599346c removed. > GEOM_LABEL: Label for provider ad10s1a is ufsid/49dd1626d599346c. > GEOM_LABEL: Label ufsid/49dd1626c888923e removed. > GEOM_LABEL: Label for provider ad10s1d is ufsid/49dd1626c888923e. > GEOM_LABEL: Label ufsid/49dd1626ed87573c removed. > GEOM_LABEL: Label for provider ad10s1f is ufsid/49dd1626ed87573c. > GEOM_LABEL: Label ufsid/49dd16280e8a20d0 removed. > GEOM_LABEL: Label for provider ad10s1e is ufsid/49dd16280e8a20d0. > GEOM_LABEL: Label ufsid/49dd1626d599346c removed. > GEOM_LABEL: Label ufsid/49dd1626c888923e removed. > GEOM_LABEL: Label ufsid/49dd1626ed87573c removed. > GEOM_LABEL: Label ufsid/49dd16280e8a20d0 removed. > This module (opensolaris) contains code covered by the > Common Development and Distribution License (CDDL) > see http://opensolaris.org/os/licensing/opensolaris_license/ > WARNING: ZFS is considered to be an experimental feature in FreeBSD. > ZFS filesystem version 6 > ZFS storage pool version 6 > GEOM_LABEL: Label for provider md0 is ufsid/4a218edd32239127. > GEOM_LABEL: Label ufsid/4a218edd32239127 removed. > info: [drm] Setting GART location based on new memory map > info: [drm] Loading R500 Microcode > info: [drm] Num pipes: 3 > info: [drm] writeback test succeeded in 1 usecs > drm0: [ITHREAD] > info: [drm] Num pipes: 3 > info: [drm] Loading R500 Microcode > info: [drm] Num pipes: 3 > info: [drm] Num pipes: 3 > info: [drm] Loading R500 Microcode > info: [drm] Num pipes: 3 > pcm0: <Envy24 audio (Generic)> port 0xac00-0xac1f,0xa880-0xa88f,0xa800-0x= a80f,0xa480-0xa4bf irq 17 at device 6.0 on pci1 > pcm0: [ITHREAD] > pcm0: system configuration > =A0SubVendorID: 0xd632, SubDeviceID: 0x1412 > =A0XIN2 Clock Source: 22.5792MHz(44.1kHz*512) > =A0MPU-401 UART(s) #: 1 > =A0AC'97 codec: not exist > =A0ADC #: 2 > =A0DAC #: 2 > =A0Multi-track converter type: I2S(16bit resolution, ID#0x1) > =A0S/PDIF(IN/OUT): 1/1 ID# 0x00 > =A0GPIO(mask/dir/state): 0x02/0xfd/0xc0 > > Any ideas what the issue might be? > > Thanks, > M > _______________________________________________ > freebsd-multimedia@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia > To unsubscribe, send any mail to "freebsd-multimedia-unsubscribe@freebsd.= org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?8103ad500908120812n54fb554dv4ed4b1e3e6783a15>