Date: Fri, 21 Jul 2000 15:04:15 -0500 From: David Uhring <duhring@charter.net> To: Carl Mascott <cmascott@thecia.net>, freebsd-stable@freebsd.org Subject: Re: Can't disable adv0 device in 4.0-STABLE-20000718 GENERIC Message-ID: <00072115081700.00957@dave.uhring.com> In-Reply-To: <200007211604.MAA00352@callisto.local> References: <200007211604.MAA00352@callisto.local>
next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, 21 Jul 2000, Carl Mascott wrote: > FreeBSD 4.0-STABLE-20000718 > > I just tried booting the boot floppies (that's all I have) on > a machine with a SoundBlaster 16 at port 220H. I went into > device config and disabled the adv0 device (Advansys SCSI). > I answered "y" to the "save settings" prompt. Yet I'm still > getting the following during hardware probing: > > adv1: Invalid baseport of 0x220 specified. Nearest valid baseport > is 0x320. Failing probe. > > Right after this, I get: > > unknown0: <Audio> at port 0x220-0x22f, [ ... ] > > which looks correct. > > I also get a couple more failed adv1 probes which I didn't > write down. The one shown is the first one. > > It looks like the adv0 device cannot be disabled, and its > hardware probe thinks the SB16 is an Advansys HBA. > > P.S. I'm not subscribed to this list. > Can't be a GENERIC kernel, GENERIC has no sound support. Remove any existing drivers for sound and insert: device pcm device sbc0 at isa? port 0x220 irq 5 drq 1 flags 0x15 Recompile and install the kernel. Reboot and note whether sbc0 or sbc1 shows up in dmesg. After boot, cd /dev & ./MAKEDEV snd0 or ./MAKEDEV snd1 as appropriate. FreeBSD properly supports the true SB 16. Maybe you should also delete (rm) the offending /dev/adv1. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?00072115081700.00957>