Date: Mon, 4 Jul 2005 21:01:31 +0200 From: Wilko Bulte <wb@freebie.xs4all.nl> To: Poul-Henning Kamp <phk@haven.freebsd.dk> Cc: alpha@freebsd.org Subject: Re: GENERIC doesn't boot AlphaServer 1000 Message-ID: <20050704190131.GA49126@freebie.xs4all.nl> In-Reply-To: <27190.1120379420@phk.freebsd.dk> References: <27190.1120379420@phk.freebsd.dk>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, Jul 03, 2005 at 10:30:20AM +0200, Poul-Henning Kamp wrote..
>
> My Alphaserver 1000 doesn't like a GENERIC kernel:
>
> de0: <Digital 21040 Ethernet> port 0x10000-0x1007f mem 0x81301000-0x8130107f irq
> 3 at device 12.0 on pci0
> de0: Reserved 0x80 bytes for rid 0x14 type 3 at 0x81301000
> de0: interrupting at CIA irq 3
> de0: [GIANT-LOCKED]
> de0: DEC 21040 [10Mb/s] pass 2.4
> de0: bpf attached
> de0: Ethernet address: 00:00:f8:21:89:2f
> de0: if_start running deferred for Giant
> fxp0: <Intel 82559 Pro/100 Ethernet> port 0x10080-0x100bf mem 0x81300000-0x81300
> fff,0x81100000-0x811fffff irq 5 at device 13.0 on pci0
> fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x81300000
> fxp0: using memory space register mapping
> fxp0: PCI IDs: 8086 1229 8086 000c 0008
> fxp0: Dynamic Standby mode is disabled
> miibus0: <MII bus> on fxp0
> inphy0: <i82555 10/100 media interface> on miibus0
> inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> fxp0: bpf attached
> fxp0: Ethernet address: 00:d0:b7:49:e6:c9
> fxp0: interrupting at CIA irq 5
> fxp0: [MPSAFE]
>
> halted CPU 0
>
> halt code = 7
> machine check while in PAL mode
> PC = 18100
DS10 on booting the latest SNAP CD I produced:
Timecounter "i8254" frequency 1193182 Hz quality 0
Timecounter "alpha" frequency 616519676 Hz quality 800
Timecounters tick every 0.976 msec
Waiting 5 seconds for SCSI devices to settle
md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xfffffc00009fb128
acd0: CDROM <CD-224E/9.9A> at ata0-master PIO4
ad0: 39093MB <FUJITSU MPG3409AH E C3C9> at ata1-master UDMA33
da0 at isp0 bus 0 target 0 lun 0
da0: <COMPAQ AD009322B9 3A07> Fixed Direct Access SCSI-2 device
da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing
Enabled
da0: 8678MB (17773500 512 byte sectors: 255H 63S/T 1106C)
fatal kernel trap:
trap entry = 0x4 (unaligned access fault)
cpuid = 0
faulting va = 0xfffffc00010d7dc2
opcode = 0x28
register = 0x1
pc = 0xfffffc00004c732c
ra = 0xfffffc00004c7598
sp = 0xfffffe001a35dbd0
curthread = 0xfffffc003eac1500
pid = 2, comm = g_event
[thread pid 2 tid 100003 ]
Stopped at is_pmbr+0x4c: and t0,#0xff,t0
<t0=0xfffffc00010d7dbe>
db>
164SX allows an install from the SNAP, but hangs after printing
Trying /sbin/init :(
Life is not good in Alpha land..
W/
--
Wilko Bulte wilko@FreeBSD.org
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20050704190131.GA49126>