Date: Sun, 25 May 2003 16:40:17 -0400 From: David Kleiner <kleiner@panix.com> To: Hidetoshi Shimokawa <simokawa@sat.t.u-tokyo.ac.jp> Cc: freebsd-firewire@freebsd.org Subject: Re: que! cdrw support Message-ID: <20030525204017.GA3707@panix.com> In-Reply-To: <ybsel2nz2q3.wl@ett.sat.t.u-tokyo.ac.jp> References: <20030525061631.GA15205@panix.com> <ybshe7jz7c3.wl@ett.sat.t.u-tokyo.ac.jp> <20030525102020.GA22040@panix.com> <ybsel2nz2q3.wl@ett.sat.t.u-tokyo.ac.jp>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, May 25, 2003 at 08:26:44PM +0900, Hidetoshi Shimokawa wrote: > At Sun, 25 May 2003 06:20:20 -0400, > David Kleiner wrote: > > after turning the device off and on, I finally get > > wallaby% fwcontrol -d 0 > > 04213830 31333934 00ffa000 0001f302 40001b5e 00044ffc 030001f3 8100000f > > The third quadlet(0x00ffa000) indicates that it supports only 100Mbps. > Can you try with the following? > > # sysctl hw.firewire.sbp.max_speed=0 > > /\ Hidetoshi Shimokawa > \/ simokawa@sat.t.u-tokyo.ac.jp > PGP public key: http://www.sat.t.u-tokyo.ac.jp/~simokawa/pgp.html > No luck: kernel: fwohci0: txd err=14 ack busy_X kernel: fw_asybusy 3 times kernel: firewire0: max_asyretry exceeded kernel: sbp0:0:0 management ORB timeout wallaby% fwcontrol -t crc_len: 4 generation:12 node_count:2 sid_count:2 id link gap_cnt speed delay cIRM power port0 port1 port2 ini more 00 1 63 S400 0 0 -1W - P 1 0 01 1 5 S400 0 1 0W C - 0 0 camcontrol hangs as well: wallaby# truss camcontrol rescan all open("/dev/xpt0",0x2,00) = 3 (0x3) readlink("/etc/malloc.conf",0xbfbff4b0,63) ERR#2 'No such file or directory' issetugid() = 0 (0x0) getuid() = 0 (0x0) mmap(0x0,4096,0x3,0x1002,-1,0x0) = 671551488 (0x28071000) break(0x8078000) = 0 (0x0) break(0x807a000) = 0 (0x0) break(0x807b000) = 0 (0x0) ioctl(3,CAMIOCOMMAND,0xbfbff570) (cannot kill it) but wallaby# camcontrol devlist -v scbus0 on sbp0 bus 0: <QPS CD-W524E 1.5A> at scbus0 target 0 lun 0 (probe0,cd0,pass0) < > at scbus0 target -1 lun -1 () scbus1 on umass-sim0 bus 0: scbus-1 on xpt0 bus 0: < > at scbus-1 target -1 lun -1 (xpt0) /David
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030525204017.GA3707>