Date: Wed, 16 Feb 2000 13:54:55 -0600 From: Bob Willcox <bob@luke.immure.com> To: freebsd-hardware@freebsd.org Subject: Supermicro PIIIDM3 MB won't boot 4.0-current kernel Message-ID: <20000216135455.A53006@luke.immure.com>
next in thread | raw e-mail | index | archive | help
Hi All,
I just received a Supermicro PIIIDM3 motherboard (they just became
available) that 4.0-current will not boot on. This is a brand new board
using the Intel 840 chipset (also has two 3.3v, 64-bit PCI slots, which
is why I needed it).
Attempting to boot the 4.0-20000214-CURRENT snapshot floppies causes it
to panic with the following screen output:
--------------------------------------------------------------------------------
Booting [kernel] ...
Fatal trap 12: page fault while in kernel mode
fault virtual address = 0x0
fault code = supperfisor read, page not present
instruction pointer = 0x8:0x0
stack pointer = 0x10:0xc05f9ffc
frame pointer = 0x10:0x0
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL=0
current process = Idle
interrupt mask = net tty bio cam
trap number = 12
panic: page fault
--------------------------------------------------------------------------------
Though this is a dual cpu MB I only have one processor plugged into it
(533MHz PIII).
I would greatly appreciate any suggestions and/or pointers on where to
go next. I have also tried booting some older -current kernels, but
they also fail (though the 4.0-20000210-CURRENT snapshot kernel quickly
reboots rather than panicing).
Thanks in advance,
Bob
--
Bob Willcox The infliction of cruelty with a good conscience
bob@immure.com is a delight to moralists. That is why they
Austin, TX invented hell. -- Bertrand Russell
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hardware" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20000216135455.A53006>