Date: Tue, 25 Jun 2002 22:02:02 +0900 From: "Shalkebaev,AntonMSCAG" <ShalkebaevA@msc.xm.mitsui.co.jp> To: "'freebsd-mobile@freebsd.org'" <freebsd-mobile@freebsd.org> Subject: Trident && Xree 4.2 Message-ID: <B5FC94784717D211931A006008911A69016ED129@MSC0E001>
next in thread | raw e-mail | index | archive | help
Hi All!
Yesterday I've installed 4.6 release and have got problem with X
it starts ok but colours in KDE or GNOME is terrible
I've got sharp pc-fj10 with trident 9388
Thanks in advance
Anton
dmesg:
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.6-RELEASE #0: Tue Jun 11 06:14:12 GMT 2002
murray@builder.freebsdmall.com:/usr/src/sys/compile/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium/P55C (quarter-micron) (265.26-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x581 Stepping = 1
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 134152192 (131008K bytes)
config> di sn0
config> di lnc0
config> di ie0
config> di fe0
config> di ed0
config> di cs0
config> di bt0
config> di aic0
config> di aha0
config> di adv0
config> q
avail memory = 125628416 (122684K bytes)
Preloaded elf kernel "kernel" at 0xc04d0000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc04d009c.
Intel Pentium detected, installing workaround for F00F bug
md0: Malloc disk
Using $PIR table, 5 entries at 0xc00fdf70
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pci0: <Trident model 9388 VGA-compatible display device> at 2.0 irq 11
isab0: <Intel 82371AB PCI to ISA bridge> at device 3.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfc90-0xfc9f at device 3.1 on
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xfca0-0xfcbf irq 11
at device 3.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip1: <Intel 82371AB Power management controller> port 0xff80-0xff8f at
device 3.3 on pci0
chip2: <ESS Technology Maestro 2E Audio controller> port 0xf800-0xf8ff irq 5
at device 6.0 on pci0
pci0: <unknown card> (vendor=0x134d, dev=0x7890) at 7.0 irq 11
pci_cfgintr_virgin: using routable interrupt 9
pci_cfgintr: 0:10 INTA routed to irq 9
pcic0: <TI PCI-1211 PCI-CardBus Bridge> irq 9 at device 10.0 on pci0
pcic0: PCI Memory allocated: 0x44000000
pcic0: TI12XX PCI Config Reg: [ring enable][speaker enable][CSC serial isa
irq]
pccard0: <PC Card bus (classic)> on pcic0
orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 4126MB <HITACHI_DK238A-43> [8944/15/63] at ata0-master UDMA33
acd0: CDROM <UJDA130> at ata0-slave PIO4
Mounting root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted
pccard: card inserted, slot 0
pccard: card removed, slot 0
pccard: card inserted, slot 0
ep0: <3Com 3C574B, Megahertz 3CCFE574BT or Fast Etherlink 3C574-TX> at port
0x240-0x25f irq 9 flags 0x1 slot 0 on pccard0
ep0: Ethernet address 00:00:86:58:10:38
XFCONFIG:
Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection
Section "Module"
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "pex5"
Load "record"
Load "xie"
Load "xtrap"
Load "speedo"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "jp106"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "Auto"
Option "Device" "/dev/sysmouse"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 31.5 - 35.1
VertRefresh 50.0 - 70.0
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "PciRetry" # [<bool>]
Option "Accel" "On" # [<bool>]
#Option "SetMClk" # <freq>
#Option "MUXThreshold" # <i>
Option "ShadowFB" "off" # [<bool>]
#Option "Rotate" # [<str>]
#Option "VideoKey" # <i>
#Option "NoMMIO" # [<bool>]
#Option "NoPciBurst" # [<bool>]
#Option "MMIOonly" # [<bool>]
#Option "CyberShadow" # [<bool>]
#Option "CyberStretch" # [<bool>]
#Option "XvHsync" # <i>
#Option "XvVsync" # <i>
#Option "XvBskew" # <i>
#Option "XvRskew" # <i>
Identifier "Card0"
Driver "trident"
VendorName "Trident"
BoardName "Cyber 9388"
ChipSet "cyber9388"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 16
SubSection "Display"
Depth 16
Modes "800x600" "640x480"
EndSubSection
EndSection
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?B5FC94784717D211931A006008911A69016ED129>