Date: Mon, 16 Jun 2014 08:50:50 +0200 From: Matthias Apitz <guru@unixarea.de> To: Hans Petter Selasky <hps@selasky.org> Cc: freebsd-usb@freebsd.org Subject: Re: Fwd: USB to parallel for printer HP LaserJet 4mL Message-ID: <20140616065050.GA1552@La-Habana> In-Reply-To: <539E87EF.9080404@selasky.org> References: <20140602150802.GA1950@La-Habana> <538C9A83.7050606@selasky.org> <20140610054403.GA1589@La-Habana> <539964AB.1030909@selasky.org> <20140613184921.GA1748@La-Habana> <539BEE2E.9050108@selasky.org> <20140614181138.GA1598@La-Habana> <539C9181.10304@selasky.org> <20140616054141.GA1358@La-Habana> <539E87EF.9080404@selasky.org>
next in thread | previous in thread | raw e-mail | index | archive | help
El día Monday, June 16, 2014 a las 08:00:15AM +0200, Hans Petter Selasky escribió: > Hi, > > Can you also use only the no-reset version: /dev/unlpt0 ? > > Make sure device is power cycled first. Hi, I did - detached USB cable - power cycled device - wait until device ready # kldunload ulpt.ko # kldload modules/usb/ulpt/ulpt.ko # sysctl hw.usb.ulpt.debug=15 hw.usb.ulpt.debug: 0 -> 15 - now pluged in the USB cable # date > /dev/unlpt0 ^C # date lunes, 16 de junio de 2014, 08:44:49 CEST # messages are attached; thx Jun 16 08:44:02 La-Habana root: Unknown USB device: vendor 0x0c45 product 0x62c0 bus uhub3 Jun 16 08:44:02 La-Habana root: Unknown USB device: vendor 0x0c45 product 0x62c0 bus uhub3 Jun 16 08:44:27 La-Habana kernel: ugen1.2: <Prlific Technology Inc.> at usbus1 Jun 16 08:44:27 La-Habana kernel: ulpt_probe: Jun 16 08:44:27 La-Habana kernel: ulpt_probe: Jun 16 08:44:27 La-Habana kernel: ulpt_attach: sc=0xc596c580 Jun 16 08:44:27 La-Habana kernel: ulpt0: <Prlific Technology Inc. IEEE-1284 Controller, class 0/0, rev 1.00/2.00, addr 2> on usbus1 Jun 16 08:44:27 La-Habana kernel: ulpt_attach: setting alternate config number: 1 Jun 16 08:44:27 La-Habana kernel: ulpt0: using bi-directional mode Jun 16 08:44:27 La-Habana kernel: ulpt_watchdog: debugging ulpt.c: ulpt_watchdog() skiped read status Jun 16 08:44:33 La-Habana last message repeated 6 times Jun 16 08:44:34 La-Habana kernel: ulpt_write_callback: state=0x0 actlen=0 Jun 16 08:44:34 La-Habana kernel: ulpt_watchdog: debugging ulpt.c: ulpt_watchdog() skiped read status Jun 16 08:44:47 La-Habana last message repeated 13 times Jun 16 08:44:48 La-Habana kernel: ulpt0: at uhub1, port 1, addr 2 (disconnected) Jun 16 08:44:48 La-Habana kernel: ulpt_detach: sc=0xc596c580 Jun 16 08:44:48 La-Habana kernel: ulpt_write_callback: state=0x2 actlen=0 Jun 16 08:44:49 La-Habana kernel: ulpt_probe: Jun 16 08:44:49 La-Habana kernel: ulpt_probe: Jun 16 08:44:49 La-Habana kernel: ulpt_attach: sc=0xc5839880 Jun 16 08:44:49 La-Habana kernel: ulpt0: <Prlific Technology Inc. IEEE-1284 Controller, class 0/0, rev 1.00/2.00, addr 2> on usbus1 Jun 16 08:44:49 La-Habana kernel: ulpt_attach: setting alternate config number: 1 Jun 16 08:44:49 La-Habana kernel: ulpt0: using bi-directional mode Jun 16 08:44:49 La-Habana kernel: ulpt_watchdog: debugging ulpt.c: ulpt_watchdog() skiped read status Jun 16 08:44:53 La-Habana last message repeated 4 times Jun 16 08:44:54 La-Habana kernel: ulpt_watchdog: debugging ulpt.c: ulpt_watchdog() skiped read status matthias -- Matthias Apitz | /"\ ASCII Ribbon Campaign: E-mail: guru@unixarea.de | \ / - No HTML/RTF in E-mail WWW: http://www.unixarea.de/ | X - No proprietary attachments phone: +49-170-4527211 | / \ - Respect for open standards | en.wikipedia.org/wiki/ASCII_Ribbon_Campaign
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20140616065050.GA1552>