Date: Sun, 29 Aug 2010 13:07:18 +0100 From: Scott Mitchell <scott+lists.freebsd@fishballoon.org> To: freebsd-usb@freebsd.org Subject: Can't attach EHCI devices in VirtualBox guest Message-ID: <201008291307.19398.scott%2Blists.freebsd@fishballoon.org>
next in thread | raw e-mail | index | archive | help
Hi all, Having some problems getting any EHCI devices to attach to an 8.1/amd64 machine running as a VirtualBox guest. This is VirtualBox 3.2.8 "PUEL" edition (i.e. *not* the open-source version) running on an Ubuntu 10.04 host, also amd64. I have these four devices plugged in and the VM configured to claim them: - 128MB no-brand flash drive, USB1 - 2GB no-brand flash drive, USB2 - 300GB Seagate hard disk, USB2 - 1.5TB WD hard disk, USB2 Full log is below (dmesg_bad.boot) but essentially the USB1 device attaches fine while all the USB2 devices fail with an error of the form: uhub_reattach_port: port 1 reset failed, error=USB_ERR_TIMEOUT uhub_reattach_port: device problem (USB_ERR_TIMEOUT), disabling port 1 None of the USB2 devices show up in "usbconfig list". If I disable the VirtualBox EHCI controller, all four devices attach as USB1 (see dmesg_good.boot below) The same four devices work fine on: - Ubuntu amd64 10.04 booted into the same VirtualBox VM from a live CD - 8.1 amd64 installed as a VMWare Server 2.0.2 guest on the same Ubuntu host - Directly on the Ubuntu host - On real hardware running FreeBSD i386 6.x and 7.x (I don't have anything real running 8.x right now) No idea if this is a VirtualBox or FreeBSD problem (although I'd guess a combination of the two) or how to go about fixing it, but happy to try any experiments. I'm not set up to build -CURRENT just now but can do that if needed. Likewise I can fire up other versions of FreeBSD under either VM environment if necessary. I have not tried setting any quirks for any of the devices, partly because I don't know what to try but mostly because this wasn't necessary in any other environment where these devices do work. This isn't a showstopper for me as I can keep using VMWare, but I have other issues with that and I would *like* to eventually move over to VirtualBox - so any suggestions would be much appreciated. Many thanks, Scott ===== dmesg_bad.boot ===== Copyright (c) 1992-2010 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.1-RELEASE #0: Mon Jul 19 02:36:49 UTC 2010 root@mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64 Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz (2997.06-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x10676 Family = 6 Model = 17 Stepping = 6 Features=0x783fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE,SSE2> Features2=0x209<SSE3,MON,SSSE3> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> TSC: P-state invariant real memory = 1073676288 (1023 MB) avail memory = 1018789888 (971 MB) ACPI APIC Table: <VBOX VBOXAPIC> ioapic0: Changing APIC ID to 1 MADT: Forcing active-low polarity and level trigger for SCI ioapic0 <Version 1.1> irqs 0-23 on motherboard kbd1 at kbdmux0 acpi0: <VBOX VBOXXSDT> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: Sleep Button (fixed) Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 cpu0: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 isab0: <PCI-ISA bridge> at device 1.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xd000-0xd00f at device 1.1 on pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 ata1: [ITHREAD] vgapci0: <VGA-compatible display> mem 0xe0000000-0xe0ffffff irq 18 at device 2.0 on pci0 em0: <Intel(R) PRO/1000 Legacy Network Connection 1.0.1> port 0xd010-0xd017 mem 0xf0000000-0xf001ffff irq 19 at device 3.0 on pci0 em0: [FILTER] em0: Ethernet address: 08:00:27:b1:fe:25 pci0: <base peripheral> at device 4.0 (no driver attached) ohci0: <OHCI (generic) USB controller> mem 0xf0804000-0xf0804fff irq 22 at device 6.0 on pci0 ohci0: [ITHREAD] usbus0: <OHCI (generic) USB controller> on ohci0 pci0: <bridge> at device 7.0 (no driver attached) ehci0: <Intel 82801FB (ICH6) USB 2.0 controller> mem 0xf0805000-0xf0805fff irq 19 at device 11.0 on pci0 ehci0: [ITHREAD] usbus1: EHCI version 1.0 usbus1: <Intel 82801FB (ICH6) USB 2.0 controller> on ehci0 acpi_acad0: <AC Adapter> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model IntelliMouse Explorer, device ID 4 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc8fff,0xe2000-0xe2fff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atrtc0: <AT Real Time Clock> at port 0x70 irq 8 on isa0 ppc0: cannot reserve I/O port range Timecounter "TSC" frequency 2997060234 Hz quality 800 Timecounters tick every 10.000 msec usbus0: 12Mbps Full Speed USB v1.0 usbus1: 480Mbps High Speed USB v2.0 ad0: 20480MB <VBOX HARDDISK 1.0> at ata0-master UDMA33 ugen0.1: <Apple> at usbus0 uhub0: <Apple OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 acd0: DVDROM <VBOX CD-ROM/1.0> at ata1-master UDMA33 Root mount waiting for: usbus1 usbus0 uhub0: 8 ports with 8 removable, self powered Root mount waiting for: usbus1 usbus0 ugen0.2: <Generic> at usbus0 umass0: <Generic Mass Storage Device, class 0/0, rev 1.10/1.00, addr 2> on usbus0 umass0: SCSI over Bulk-Only; quirks = 0x0000 umass0: Get Max Lun not supported (USB_ERR_SHORT_XFER) Root mount waiting for: usbus1 usbus0 umass0:0:0:-1: Attached to scbus0 Root mount waiting for: usbus1 uhub1: 8 ports with 8 removable, self powered da0 at umass-sim0 bus 0 scbus0 target 0 lun 0 da0: <TwinMOS Mobile Disk 7.77> Removable Direct Access SCSI-2 device da0: 1.000MB/s transfers da0: 125MB (256000 512 byte sectors: 64H 32S/T 125C) GEOM: da0: partition 1 does not end on a track boundary. Root mount waiting for: usbus1 uhub_reattach_port: port 1 reset failed, error=USB_ERR_TIMEOUT uhub_reattach_port: device problem (USB_ERR_TIMEOUT), disabling port 1 Trying to mount root from ufs:/dev/ad0s1a uhub_reattach_port: port 2 reset failed, error=USB_ERR_TIMEOUT uhub_reattach_port: device problem (USB_ERR_TIMEOUT), disabling port 2 ===== dmesg_good.boot ===== Copyright (c) 1992-2010 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.1-RELEASE #0: Mon Jul 19 02:36:49 UTC 2010 root@mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64 Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz (2994.27-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x10676 Family = 6 Model = 17 Stepping = 6 Features=0x783fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE,SSE2> Features2=0x209<SSE3,MON,SSSE3> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> TSC: P-state invariant real memory = 1073676288 (1023 MB) avail memory = 1018789888 (971 MB) ACPI APIC Table: <VBOX VBOXAPIC> ioapic0: Changing APIC ID to 1 MADT: Forcing active-low polarity and level trigger for SCI ioapic0 <Version 1.1> irqs 0-23 on motherboard kbd1 at kbdmux0 acpi0: <VBOX VBOXXSDT> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: Sleep Button (fixed) Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 cpu0: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 isab0: <PCI-ISA bridge> at device 1.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xd000-0xd00f at device 1.1 on pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 ata1: [ITHREAD] vgapci0: <VGA-compatible display> mem 0xe0000000-0xe0ffffff irq 18 at device 2.0 on pci0 em0: <Intel(R) PRO/1000 Legacy Network Connection 1.0.1> port 0xd010-0xd017 mem 0xf0000000-0xf001ffff irq 19 at device 3.0 on pci0 em0: [FILTER] em0: Ethernet address: 08:00:27:b1:fe:25 pci0: <base peripheral> at device 4.0 (no driver attached) ohci0: <OHCI (generic) USB controller> mem 0xf0804000-0xf0804fff irq 22 at device 6.0 on pci0 ohci0: [ITHREAD] usbus0: <OHCI (generic) USB controller> on ohci0 pci0: <bridge> at device 7.0 (no driver attached) acpi_acad0: <AC Adapter> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model IntelliMouse Explorer, device ID 4 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc8fff,0xe2000-0xe2fff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atrtc0: <AT Real Time Clock> at port 0x70 irq 8 on isa0 ppc0: cannot reserve I/O port range Timecounter "TSC" frequency 2994272198 Hz quality 800 Timecounters tick every 10.000 msec usbus0: 12Mbps Full Speed USB v1.0 ad0: 20480MB <VBOX HARDDISK 1.0> at ata0-master UDMA33 ugen0.1: <Apple> at usbus0 uhub0: <Apple OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 acd0: DVDROM <VBOX CD-ROM/1.0> at ata1-master UDMA33 Root mount waiting for: usbus0 uhub0: 8 ports with 8 removable, self powered Root mount waiting for: usbus0 ugen0.2: <Generic> at usbus0 umass0: <Generic Mass Storage Device, class 0/0, rev 1.10/1.00, addr 2> on usbus0 umass0: SCSI over Bulk-Only; quirks = 0x0000 umass0: Get Max Lun not supported (USB_ERR_SHORT_XFER) Root mount waiting for: usbus0 umass0:0:0:-1: Attached to scbus0 Root mount waiting for: usbus0 da0 at umass-sim0 bus 0 scbus0 target 0 lun 0 da0: <TwinMOS Mobile Disk 7.77> Removable Direct Access SCSI-2 device da0: 1.000MB/s transfers da0: 125MB (256000 512 byte sectors: 64H 32S/T 125C) ugen0.3: <SMI Corporation> at usbus0 umass1: <SMI Corporation USB DISK, class 0/0, rev 1.10/11.00, addr 3> on usbus0 umass1: SCSI over Bulk-Only; quirks = 0x0000 GEOM: da0: partition 1 does not end on a track boundary. umass1:1:1:-1: Attached to scbus1 da1 at umass-sim1 bus 1 scbus1 target 0 lun 0 da1: <Easy Disk 1100> Removable Direct Access SCSI-0 device da1: 1.000MB/s transfers da1: 1935MB (3963904 512 byte sectors: 255H 63S/T 246C) GEOM: da1: partition 1 does not start on a track boundary. GEOM: da1: partition 1 does not end on a track boundary. ugen0.4: <Seagate> at usbus0 umass2: <Seagate ST94811U2-RK, class 0/0, rev 1.10/2.00, addr 4> on usbus0 umass2: SCSI over Bulk-Only; quirks = 0x0000 umass2:2:2:-1: Attached to scbus2 da2 at umass-sim2 bus 2 scbus2 target 0 lun 0 da2: <ST330063 1A 3.04> Fixed Direct Access SCSI-0 device da2: 1.000MB/s transfers da2: 286168MB (586072368 512 byte sectors: 255H 63S/T 36481C) ugen0.5: <Western Digital> at usbus0 umass3: <Western Digital External HDD, class 0/0, rev 1.10/1.75, addr 5> on usbus0 umass3: SCSI over Bulk-Only; quirks = 0x0000 Root mount waiting for: usbus0 umass3:3:3:-1: Attached to scbus3 Trying to mount root from ufs:/dev/ad0s1a da3 at umass-sim3 bus 3 scbus3 target 0 lun 0 da3: <WD 15EADS External 1.75> Fixed Direct Access SCSI-4 device da3: 1.000MB/s transfers da3: 1430799MB (2930277168 512 byte sectors: 255H 63S/T 182401C) ===== usbconfig_bad.out ===== ugen0.1: <OHCI root HUB Apple> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ugen1.1: <EHCI root HUB Intel> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON ugen0.2: <Mass Storage Device Generic> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ===== usbconfig_good.out ===== ugen0.1: <OHCI root HUB Apple> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ugen0.2: <Mass Storage Device Generic> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ugen0.3: <USB DISK SMI Corporation> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ugen0.4: <ST94811U2-RK Seagate> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ugen0.5: <External HDD Western Digital> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201008291307.19398.scott%2Blists.freebsd>