Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 13 May 2007 15:49:15 -0700
From:      Jin Guojun <j_guojun@lbl.gov>
To:        Sam Leffler <sam@errno.com>
Cc:        Lev Serebryakov <lev@freebsd.org>, freebsd-hardware@freebsd.org
Subject:   Re: AR5513 chipset (DLink DWL-G520M) support in ath(4)?
Message-ID:  <464795EB.1000004@lbl.gov>
In-Reply-To: <46479399.7030702@errno.com>
References:  <775615123.20070513194957@serebryakov.spb.ru>	<464754C6.6050605@errno.com>	<116377599.20070513223803@serebryakov.spb.ru> <46479399.7030702@errno.com>

next in thread | previous in thread | raw e-mail | index | archive | help
Sam Leffler wrote:

>Lev Serebryakov wrote:
>  
>
>>Hello Sam,
>>
>>Sunday, May 13, 2007, 10:11:18 PM, you wrote:
>>
>>    
>>
>>>>Hello All,
>>>>
>>>>  Is here any work to support newest Atheros chipsets, AR5513, for
>>>>example,  in ath(4)?
>>>>
>>>>        
>>>>
>>SL> This is a MIPS-based SoC.  Supporting it requires a lot more than just
>>SL> ath changes.
>>  Oops. Year ot two and every chip and card in PC will have its own OS -- GPU, network, sound, etc :)
>>  There is not documentation/firmware form Atheros, of course?
>>    
>>
>
>For Atheros SoC = GPU + Wireless h/w.  The wireless h/w is not exposed
>via PCI bus but sits on an internal bus and is controlled by the GPU
>which runs a complete OS like linux or netbsd (and hopefully some day
>freebsd).  The ath driver just needs the appropriate bus shim to work
>and support has been available for a while.
>
>  
>
>>  
>>  I suppose, that 802.11n draft chipsets are SoCs too?
>>
>>    
>>
>
>The 5416 and 5418 are stock PCI (-express) parts that require the host
>to handle much of the 11n protocol.  I've given out test hal's that
>support these parts (in legacy mode) for many months.
>  
>
I was trying to add 5513, 5416/5418 in FreeBSD 6.2 to support these 
chips but the hal is distributed in
binary mode, and I do not have time to rewite whole thing  from scratch.

That is cool. Where can I get the ATH hal for testing? I have all types 
of Atheros mini-PCI cards and I can
test them on FreeBSD 6.2 (only 6.2-R).

-Jin



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?464795EB.1000004>