Date: Wed, 05 Feb 2003 21:03:32 +0300 From: Victor Ponomarev <vick@unet.ru> To: Scott Long <scott_long@btc.adaptec.com> Cc: freebsd-current@freebsd.org, freebsd-smp@freebsd.org Subject: Re: se7500+dual xeon? Message-ID: <3E4151F4.7060108@unet.ru> References: <3E40DFFF.3040706@unet.ru> <3E413146.7080207@btc.adaptec.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi Scott! You right only partially :) The old method of kernel building doesn't work correctly (config KERNEL;cd ../compile/KERNEL;make depend;make) Using make buildkernel ones produces a real support for SMP but warnig remains and power button doesn't work :( Scott Long wrote: > What exactly are you pointing out that doesn't work? It looks like > you're using the default GENERIC uni-processor kernel from the 5.0 > release. You'll need to recompile your kernel for SMP. > > Scott > > Victor Ponomarev wrote: > >> Hi All. >> >> It's seems that smp kernel configuration doesn't work correctly on >> Intel SE7500WV2 motherboard >> with 2 xeon processors in 5.0-RELEASE. >> >> Copyright (c) 1992-2003 The FreeBSD Project. >> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 >> The Regents of the University of California. All rights reserved. >> FreeBSD 5.0-RELEASE #0: Thu Jan 16 22:16:53 GMT 2003 >> root@hollin.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC >> Preloaded elf kernel "/boot/kernel/kernel" at 0xc0673000. >> Preloaded elf module "/boot/kernel/acpi.ko" at 0xc06730a8. >> Timecounter "i8254" frequency 1193182 Hz >> Timecounter "TSC" frequency 2592366912 Hz >> CPU: Pentium 4 (2592.37-MHz 686-class CPU) >> Origin = "GenuineIntel" Id = 0xf27 Stepping = 7 >> >> Features=0xffffffffbfebfbff> >> >> real memory = 2147418112 (2047 MB) >> avail memory = 2083561472 (1987 MB) >> Initializing GEOMetry subsystem >> Pentium Pro MTRR support enabled >> ACPI-0625: *** Warning: Type override - [DEB_] had invalid type >> (Integer) for Scope operator, changed to (Scope) >> ACPI-0625: *** Warning: Type override - [MLIB] had invalid type >> (Integer) for Scope operator, changed to (Scope) >> ACPI-0625: *** Warning: Type override - [DATA] had invalid type >> (String) for Scope operator, changed to (Scope) >> ACPI-0625: *** Warning: Type override - [SIO_] had invalid type >> (String) for Scope operator, changed to (Scope) >> ACPI-0625: *** Warning: Type override - [LEDP] had invalid type >> (String) for Scope operator, changed to (Scope) >> ACPI-0625: *** Warning: Type override - [GPEN] had invalid type >> (String) for Scope operator, changed to (Scope) >> ACPI-0625: *** Warning: Type override - [GPST] had invalid type >> (String) for Scope operator, changed to (Scope) >> ACPI-0625: *** Warning: Type override - [WUES] had invalid type >> (String) for Scope operator, changed to (Scope) >> ACPI-0625: *** Warning: Type override - [WUSE] had invalid type >> (String) for Scope operator, changed to (Scope) >> ACPI-0625: *** Warning: Type override - [SBID] had invalid type >> (String) for Scope operator, changed to (Scope) >> ACPI-0625: *** Warning: Type override - [SWCE] had invalid type >> (String) for Scope operator, changed to (Scope) >> npx0: on motherboard >> npx0: INT 16 interface >> acpi0: on motherboard >> ACPI-1287: *** Error: Method execution failed, AE_NOT_EXIST >> ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15 >> ACPI-0625: *** Info: GPE Block1 defined as GPE16 to GPE47 >> Using $PIR table, 19 entries at 0xc00f3070 >> acpi0: power button is handled as a fixed feature programming model. >> Timecounter "ACPI-fast" frequency 3579545 Hz >> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 >> acpi_cpu0: on acpi0 >> acpi_cpu1: on acpi0 >> acpi_cpu2: on acpi0 >> acpi_cpu3: on acpi0 >> pcib0: port 0xcf8-0xcff on acpi0 >> pci0: on pcib0 >> pci0: at device 0.1 (no driver attached) >> pcib1: at device 3.0 on pci0 >> pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.P0P5 - >> AE_NOT_FOUND >> pci2: on pcib1 >> pci2: at device 28.0 (no driver >> attached) >> pcib2: at device 29.0 on pci2 >> pci4: on pcib2 >> pci2: at device 30.0 (no driver >> attached) >> pcib3: at device 31.0 on pci2 >> pci3: on pcib3 >> em0: port >> 0x2040-0x207f mem 0xfeac0000-0xfeadffff irq 10 at device 7.0 on pci3 >> em0: Speed:N/A Duplex:N/A >> em1: port >> 0x2000-0x203f mem 0xfeae0000-0xfeafffff irq 10 at device 7.1 on pci3 >> em1: Speed:N/A Duplex:N/A >> pci0: at device 3.1 (no driver attached) >> pcib4: at device 30.0 on pci0 >> pci1: on pcib4 >> atapci0: port >> 0x1420-0x142f,0x140c-0x140f,0x1410-0x1417,0x1408-0x140b,0x1400-0x1407 >> mem 0xfe9e0000-0xfe9e3fff irq 9 at device 2.0 on pci1 >> ata2: at 0x1400 on atapci0 >> ata3: at 0x1410 on atapci0 >> pci1: at device 12.0 (no driver attached) >> isab0: at device 31.0 on pci0 >> isa0: on isab0 >> atapci1: port >> 0x3a0-0x3af,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0 >> ata0: at 0x1f0 irq 14 on atapci1 >> ata1: at 0x170 irq 15 on atapci1 >> pci0: at device 31.3 (no driver attached) >> atkbdc0: port 0x64,0x60 irq 1 on acpi0 >> atkbd0: flags 0x1 irq 1 on atkbdc0 >> kbd0 at atkbd0 >> acpi_ec0: port 0xca7,0xca6 on acpi0 >> fdc0: cmd 3 failed at out byte 1 of 3 >> sio0 port 0x3f8-0x3ff irq 4 on acpi0 >> sio0: type 16550A >> sio1 port 0x2f8-0x2ff irq 3 on acpi0 >> sio1: type 16550A >> fdc0: cmd 3 failed at out byte 1 of 3 >> orm0: at iomem >> 0xd3000-0xd47ff,0xd1800-0xd2fff,0xc8000-0xd17ff,0xc0000-0xc7fff on isa0 >> pmtimer0 on isa0 >> fdc0: at port >> 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 >> fdc0: FIFO enabled, 8 bytes threshold >> fd0: <1440-KB 3.5" drive> on fdc0 drive 0 >> ppc0: parallel port not found. >> sc0: at flags 0x100 on isa0 >> sc0: VGA <16 virtual consoles, flags=0x300> >> vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 >> Timecounters tick every 10.000 msec >> acd0: CDROM at ata1-master PIO4 >> ar0: 76319MB [9729/255/63] status: READY subdisks: >> 0 READY ad4: 76319MB [155061/16/63] at ata2-master UDMA100 >> ar1: 78533MB [10011/255/63] status: READY subdisks: >> 0 READY ad6: 78533MB [159560/16/63] at ata3-master >> UDMA100 >> Opened disk ad4 -> 16 >> Opened disk ad4 -> 16 >> Opened disk ad4 -> 16 >> Opened disk ad4 -> 16 >> Opened disk ad6 -> 16 >> Opened disk ad6 -> 16 >> Mounting root from ufs:/dev/ar0s1a >> >> >> >> To Unsubscribe: send mail to majordomo@FreeBSD.org >> with "unsubscribe freebsd-current" in the body of the message > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-smp" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3E4151F4.7060108>