Date: Tue, 4 Feb 2003 15:36:47 +0000 From: Geoff Buckingham <geoffb@chuggalug.clues.com> To: Ruslan Ermilov <ru@FreeBSD.ORG> Cc: stable@FreeBSD.ORG Subject: Re: HP/Compaq DL580 G2 Message-ID: <20030204153647.GB43238@chuggalug.clues.com> In-Reply-To: <20030204143805.GB14893@sunbay.com> References: <20030204145009.GA43238@chuggalug.clues.com> <20030204143805.GB14893@sunbay.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, Feb 04, 2003 at 04:38:05PM +0200, Ruslan Ermilov wrote:
> On Tue, Feb 04, 2003 at 02:50:09PM +0000, Geoff Buckingham wrote:
> > Anybody got the Broadcom NIC provides with these systems to work with 4.7?
> >
> > or at all?
> >
> Gigabit one?
>
I have bee looking into this, the machine is a loaner,
it contains three em's which I can see fine, an fxp
and a bge which I can not.
The two nics I cant see are not listed as unknown devices either,
they seem to be hidden behind the compaq hotplug pci controller
(0xa0f7)
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.7-RELEASE #0: Wed Oct 9 15:08:34 GMT 2002
root@builder.freebsdmall.com:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium 4 (1599.95-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf11 Stepping = 1
Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,C
MOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,<b28>,ACC>
real memory = 2147459072 (2097128K bytes)
avail memory = 2086514688 (2037612K bytes)
Preloaded elf kernel "kernel" at 0xc050f000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pci0: <unknown card> (vendor=0x0e11, dev=0xb203) at 2.0 irq 3
pci0: <unknown card> (vendor=0x0e11, dev=0xb204) at 2.2 irq 5
pci0: <ATI Mach64-GR graphics accelerator> at 3.0
isab0: <PCI to ISA bridge (vendor=1166 device=0201)> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks CSB5 ATA100 controller> port 0x2000-0x200f,0x374-0x377,0x1
70-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
ohci0: <OHCI (generic) USB controller> mem 0xeefe0000-0xeefe0fff irq 10 at devic
e 15.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pcib1: <Host to PCI bridge> on motherboard
pci1: <PCI bus> on pcib1
ciss0: <Compaq Smart Array 5i> port 0x3000-0x30ff mem 0xf01f0000-0xf01f3fff,0xf0
2c0000-0xf02fffff irq 11 at device 1.0 on pci1
ciss0: using 256 of 1024 available commands
ciss0: 1 logical drive configured
ciss0: firmware 1.80
ciss0: 2 SCSI channels
ciss0: signature 'CISS'
ciss0: valence 1
ciss0: supported I/O methods 0xe<simple,performant,MEMQ>
ciss0: active I/O method 0x3<simple>
ciss0: 4G page base 0x00000000
ciss0: interrupt coalesce delay 1000us
ciss0: interrupt coalesce count 16
ciss0: max outstanding commands 1024
ciss0: bus types 0x2<ultra3>
ciss0: server name ''
ciss0: heartbeat 0x30000058
ciss0: 1 logical drive
ciss0: logical drive 0: RAID 5, 34304MB online
pcib2: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib2
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.3.14> mem 0xf2bd0000-0xf
2bdffff,0xf2be0000-0xf2bfffff irq 10 at device 1.0 on pci2
em0: Speed:N/A Duplex:N/A
em1: <Intel(R) PRO/1000 Network Connection, Version - 1.3.14> mem 0xf2b90000-0xf
2b9ffff,0xf2ba0000-0xf2bbffff irq 5 at device 2.0 on pci2
em1: Speed:N/A Duplex:N/A
pci2: <unknown card> (vendor=0x0e11, dev=0xa0f7) at 30.0 irq 3
pcib3: <Host to PCI bridge> on motherboard
pci3: <PCI bus> on pcib3
pcib4: <Host to PCI bridge> on motherboard
pci4: <PCI bus> on pcib4
pcib5: <Host to PCI bridge> on motherboard
pci5: <PCI bus> on pcib5
pcib6: <Host to PCI bridge> on motherboard
pci6: <PCI bus> on pcib6
em2: <Intel(R) PRO/1000 Network Connection, Version - 1.3.14> mem 0xf7cd0000-0xf
7cdffff,0xf7ce0000-0xf7cfffff irq 10 at device 2.0 on pci6
em2: Speed:N/A Duplex:N/A
pci6: <unknown card> (vendor=0x0e11, dev=0xa0f7) at 30.0 irq 10
pcib7: <Host to PCI bridge> on motherboard
pci7: <PCI bus> on pcib7
pcib8: <Host to PCI bridge> on motherboard
pci8: <PCI bus> on pcib8
eisa0: <EISA bus> on motherboard
mainboard0: <CPQ0736 (System Board)> on eisa0 slot 0
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xcc000-0xcd7ff,0xc
d800-0xcefff,0xee000-0xeffff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: parallel port not found.
ata0-slave: ATA identify retries exceeded
acd0: CDROM <COMPAQ CD-ROM SN-124> at ata0-master PIO4
Mounting root from ufs:/dev/da0s1a
da0 at ciss0 bus 0 target 0 lun 0
da0: <COMPAQ RAID 5 VOLUME OK> Fixed Direct Access SCSI-0 device
da0: 135.168MB/s transfers
da0: 34719MB (71106240 512 byte sectors: 255H 32S/T 8714C)
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030204153647.GB43238>