Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 19 Dec 2000 22:28:48 -0500 (EST)
From:      freebsduser <freebsduser@earthlink.net>
To:        Patrick Seal <patseal@hyperhost.net>
Cc:        freebsd-questions@FreeBSD.ORG
Subject:   Re: ppp and Earthlink
Message-ID:  <Pine.BSF.4.05.10012192220330.27098-100000@bsdbox.gregory.earthlink.net>
In-Reply-To: <20001219160105.B50387@hyperhost.net>

next in thread | previous in thread | raw e-mail | index | archive | help
I've been using earthlink for about a year without a problem.  I think you
may have forgotten your "realm" in the authname (see my .conf below).  I
have to put an "ELN/" before my login name.  They changed this about 6-8
months ago.  It took a while with their tech support to figure this out.
If I connected manually I got a command line, ppp wouldn't kick off.

Scott


default:
 
 set device /dev/cuaa0
 
 set log Phase Chat LCP IPCP CCP tun command
 set speed 115200
 set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 2 \"\" AT OK-AT-OK ATE1Q0
OK ATL1 OK \\dATDT\\T TIMEOUT 40 CONNECT"
 
 set timeout 300
 set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
 iface clear
 delete ALL
 add default HISADDR
 enable dns
 
 
earthlink:
 
 set phone 1234567
 set authname ELN/loginname
 set authkey mypass


On Tue, 19 Dec 2000, Patrick Seal wrote:

> I've decided to try out earthlink but I can't seem to connect. I've been
> using a local ISP who I need to connect the old fashion way of a login
> script, but earthlink uses PAP/CHAP.
> 
> I'm running stable since yesterday (when new ppp code was released I
> decided to cvsup and see if it would work)
> 
> BTW, I know my username and password are corect.
> 
> Thanks,
> 
> Here's my config:
> 
> default:
>  ident user-ppp VERSION (built COMPILATIONDATE)
>  set log Phase Chat LCP IPCP CCP tun command
> [cut]
> 
> radixnet:
>  set phone 3016383300|3016457766
>  set login "ABORT NO\\sCARRIER TIMEOUT 10 Net>):--Net>): ppp \
>             name: patseal word: ********"
> 
> earthlink:
>  set phone 2403526884|3016383240
>  set authname patseal
>  set authkey ********
> 
> 
> Here's the relevant error message for the first phone number of earthlink:
> [cut]
> Dec 19 15:49:13 foobar ppp[50535]: tun0: Command: earthlink: set phone 2403526884|3016383240 
> Dec 19 15:49:13 foobar ppp[50535]: tun0: Command: earthlink: set authname patseal 
> Dec 19 15:49:13 foobar ppp[50535]: tun0: Command: earthlink: set authkey ******** 
> [cut]
> Dec 19 15:49:35 foobar ppp[50536]: tun0: LCP: FSM: Using "deflink" as a transport 
> Dec 19 15:49:35 foobar ppp[50536]: tun0: LCP: deflink: State change Initial --> Closed 
> Dec 19 15:49:35 foobar ppp[50536]: tun0: LCP: deflink: State change Closed --> Stopped 
> Dec 19 15:49:36 foobar ppp[50536]: tun0: LCP: deflink: LayerStart 
> Dec 19 15:49:36 foobar ppp[50536]: tun0: LCP: deflink: SendConfigReq(1) state = Stopped 
> Dec 19 15:49:36 foobar ppp[50536]: tun0: LCP:  ACFCOMP[2] 
> Dec 19 15:49:36 foobar ppp[50536]: tun0: LCP:  PROTOCOMP[2] 
> Dec 19 15:49:36 foobar ppp[50536]: tun0: LCP:  ACCMAP[6] 0x00000000 
> Dec 19 15:49:36 foobar ppp[50536]: tun0: LCP:  MRU[4] 1500 
> Dec 19 15:49:36 foobar ppp[50536]: tun0: LCP:  MAGICNUM[6] 0x36357960 
> Dec 19 15:49:36 foobar ppp[50536]: tun0: LCP: deflink: State change Stopped --> Req-Sent 
> Dec 19 15:49:36 foobar ppp[50536]: tun0: LCP: deflink: RecvConfigReq(1) state = Req-Sent 
> Dec 19 15:49:36 foobar ppp[50536]: tun0: LCP:  MRU[4] 1514 
> Dec 19 15:49:36 foobar ppp[50536]: tun0: LCP:  ACCMAP[6] 0x00000000 
> Dec 19 15:49:36 foobar ppp[50536]: tun0: LCP:  AUTHPROTO[4] 0xc023 (PAP) 
> Dec 19 15:49:36 foobar ppp[50536]: tun0: LCP:  MAGICNUM[6] 0x810d14c4 
> Dec 19 15:49:36 foobar ppp[50536]: tun0: LCP:  PROTOCOMP[2] 
> Dec 19 15:49:36 foobar ppp[50536]: tun0: LCP:  ACFCOMP[2] 
> Dec 19 15:49:36 foobar ppp[50536]: tun0: LCP:  MRRU[4] 1514 
> Dec 19 15:49:36 foobar ppp[50536]: tun0: LCP:  ENDDISC[3] Null Class 
> Dec 19 15:49:36 foobar ppp[50536]: tun0: LCP: deflink: SendConfigRej(1) state = Req-Sent 
> Dec 19 15:49:36 foobar ppp[50536]: tun0: LCP:  MRRU[4] 1514 
> Dec 19 15:49:36 foobar ppp[50536]: tun0: LCP: Sending ident magic 36357960 text user-ppp 2.3 (built Dec 18 2000) 
> Dec 19 15:49:36 foobar ppp[50536]: tun0: LCP: deflink: SendIdent(0) state = Req-Sent 
> Dec 19 15:49:36 foobar ppp[50536]: tun0: LCP: deflink: RecvConfigAck(1) state = Req-Sent 
> Dec 19 15:49:36 foobar ppp[50536]: tun0: LCP: deflink: State change Req-Sent --> Ack-Rcvd 
> Dec 19 15:49:36 foobar ppp[50536]: tun0: LCP: deflink: RecvConfigReq(2) state = Ack-Rcvd 
> Dec 19 15:49:36 foobar ppp[50536]: tun0: LCP:  MRU[4] 1514 
> Dec 19 15:49:36 foobar ppp[50536]: tun0: LCP:  ACCMAP[6] 0x00000000 
> Dec 19 15:49:36 foobar ppp[50536]: tun0: LCP:  AUTHPROTO[4] 0xc023 (PAP) 
> Dec 19 15:49:36 foobar ppp[50536]: tun0: LCP:  MAGICNUM[6] 0x810d14c4 
> Dec 19 15:49:36 foobar ppp[50536]: tun0: LCP:  PROTOCOMP[2] 
> Dec 19 15:49:36 foobar ppp[50536]: tun0: LCP:  ACFCOMP[2] 
> Dec 19 15:49:36 foobar ppp[50536]: tun0: LCP: deflink: SendConfigAck(2) state = Ack-Rcvd 
> Dec 19 15:49:36 foobar ppp[50536]: tun0: LCP:  MRU[4] 1514 
> Dec 19 15:49:36 foobar ppp[50536]: tun0: LCP:  ACCMAP[6] 0x00000000 
> Dec 19 15:49:36 foobar ppp[50536]: tun0: LCP:  AUTHPROTO[4] 0xc023 (PAP) 
> Dec 19 15:49:36 foobar ppp[50536]: tun0: LCP:  MAGICNUM[6] 0x810d14c4 
> Dec 19 15:49:36 foobar ppp[50536]: tun0: LCP:  PROTOCOMP[2] 
> Dec 19 15:49:36 foobar ppp[50536]: tun0: LCP:  ACFCOMP[2] 
> Dec 19 15:49:36 foobar ppp[50536]: tun0: LCP: deflink: State change Ack-Rcvd --> Opened 
> Dec 19 15:49:36 foobar ppp[50536]: tun0: LCP: deflink: LayerUp 
> Dec 19 15:49:36 foobar ppp[50536]: tun0: LCP: Sending ident magic 36357960 text user-ppp 2.3 (built Dec 18 2000) 
> Dec 19 15:49:36 foobar ppp[50536]: tun0: LCP: deflink: SendIdent(1) state = Opened 
> Dec 19 15:49:36 foobar ppp[50536]: tun0: Phase: bundle: Authenticate 
> Dec 19 15:49:36 foobar ppp[50536]: tun0: Phase: deflink: his = PAP, mine = none 
> Dec 19 15:49:36 foobar ppp[50536]: tun0: Phase: Pap Output: patseal ******** 
> Dec 19 15:49:36 foobar ppp[50536]: tun0: Phase: Pap Input: FAILURE dropped (got id 0, not 1) 
> Dec 19 15:49:39 foobar ppp[50536]: tun0: Phase: Pap Output: patseal ******** 
> Dec 19 15:49:39 foobar ppp[50536]: tun0: Phase: Pap Input: FAILURE dropped (got id 0, not 2) 
> Dec 19 15:49:42 foobar ppp[50536]: tun0: Phase: Pap Output: patseal ******** 
> Dec 19 15:49:42 foobar ppp[50536]: tun0: Phase: Pap Input: FAILURE dropped (got id 0, not 3) 
> Dec 19 15:49:45 foobar ppp[50536]: tun0: Phase: Auth: No response from server 
> 
> And the second number of earthlink:
> [cut]
> Dec 19 15:50:16 foobar ppp[50617]: tun0: Command: earthlink: set phone 3016383240 
> Dec 19 15:50:16 foobar ppp[50617]: tun0: Command: earthlink: set authname patseal 
> Dec 19 15:50:16 foobar ppp[50617]: tun0: Command: earthlink: set authkey ******** 
> [cut]
> Dec 19 15:50:51 foobar ppp[50618]: tun0: LCP: FSM: Using "deflink" as a transport 
> Dec 19 15:50:51 foobar ppp[50618]: tun0: LCP: deflink: State change Initial --> Closed 
> Dec 19 15:50:51 foobar ppp[50618]: tun0: LCP: deflink: State change Closed --> Stopped 
> Dec 19 15:50:53 foobar ppp[50618]: tun0: LCP: deflink: LayerStart 
> Dec 19 15:50:53 foobar ppp[50618]: tun0: LCP: deflink: SendConfigReq(1) state = Stopped 
> Dec 19 15:50:53 foobar ppp[50618]: tun0: LCP:  ACFCOMP[2] 
> Dec 19 15:50:53 foobar ppp[50618]: tun0: LCP:  PROTOCOMP[2] 
> Dec 19 15:50:53 foobar ppp[50618]: tun0: LCP:  ACCMAP[6] 0x00000000 
> Dec 19 15:50:53 foobar ppp[50618]: tun0: LCP:  MRU[4] 1500 
> Dec 19 15:50:53 foobar ppp[50618]: tun0: LCP:  MAGICNUM[6] 0x723c281c 
> Dec 19 15:50:53 foobar ppp[50618]: tun0: LCP: deflink: State change Stopped --> Req-Sent 
> Dec 19 15:50:53 foobar ppp[50618]: tun0: LCP: deflink: RecvConfigReq(1) state = Req-Sent 
> Dec 19 15:50:53 foobar ppp[50618]: tun0: LCP:  <0x0>[4] 0000 
> Dec 19 15:50:53 foobar ppp[50618]: tun0: LCP:  MRU[4] 1524 
> Dec 19 15:50:53 foobar ppp[50618]: tun0: LCP:  ACCMAP[6] 0x000a0000 
> Dec 19 15:50:53 foobar ppp[50618]: tun0: LCP:  AUTHPROTO[5] 0xc223 (CHAP 0x05) 
> Dec 19 15:50:53 foobar ppp[50618]: tun0: LCP:  PROTOCOMP[2] 
> Dec 19 15:50:53 foobar ppp[50618]: tun0: LCP:  ACFCOMP[2] 
> Dec 19 15:50:53 foobar ppp[50618]: tun0: LCP:  MRRU[4] 1524 
> Dec 19 15:50:53 foobar ppp[50618]: tun0: LCP:  ENDDISC[9] MAC 00:c0:7b:8b:18:6d 
> Dec 19 15:50:53 foobar ppp[50618]: tun0: LCP: deflink: SendConfigRej(1) state = Req-Sent 
> Dec 19 15:50:53 foobar ppp[50618]: tun0: LCP:  <0x0>[4] 0000 
> Dec 19 15:50:53 foobar ppp[50618]: tun0: LCP:  MRRU[4] 1524 
> Dec 19 15:50:53 foobar ppp[50618]: tun0: LCP: Sending ident magic 723c281c text user-ppp 2.3 (built Dec 18 2000) 
> Dec 19 15:50:53 foobar ppp[50618]: tun0: LCP: deflink: SendIdent(0) state = Req-Sent 
> Dec 19 15:50:53 foobar ppp[50618]: tun0: LCP: deflink: RecvConfigAck(1) state = Req-Sent 
> Dec 19 15:50:53 foobar ppp[50618]: tun0: LCP: deflink: State change Req-Sent --> Ack-Rcvd 
> Dec 19 15:50:53 foobar ppp[50618]: tun0: LCP: deflink: RecvConfigReq(2) state = Ack-Rcvd 
> Dec 19 15:50:53 foobar ppp[50618]: tun0: LCP:  MRU[4] 1524 
> Dec 19 15:50:53 foobar ppp[50618]: tun0: LCP:  ACCMAP[6] 0x000a0000 
> Dec 19 15:50:53 foobar ppp[50618]: tun0: LCP:  AUTHPROTO[5] 0xc223 (CHAP 0x05) 
> Dec 19 15:50:53 foobar ppp[50618]: tun0: LCP:  PROTOCOMP[2] 
> Dec 19 15:50:53 foobar ppp[50618]: tun0: LCP:  ACFCOMP[2] 
> Dec 19 15:50:53 foobar ppp[50618]: tun0: LCP:  ENDDISC[9] MAC 00:c0:7b:8b:18:6d 
> Dec 19 15:50:53 foobar ppp[50618]: tun0: LCP: deflink: SendConfigAck(2) state = Ack-Rcvd 
> Dec 19 15:50:53 foobar ppp[50618]: tun0: LCP:  MRU[4] 1524 
> Dec 19 15:50:53 foobar ppp[50618]: tun0: LCP:  ACCMAP[6] 0x000a0000 
> Dec 19 15:50:53 foobar ppp[50618]: tun0: LCP:  AUTHPROTO[5] 0xc223 (CHAP 0x05) 
> Dec 19 15:50:53 foobar ppp[50618]: tun0: LCP:  PROTOCOMP[2] 
> Dec 19 15:50:53 foobar ppp[50618]: tun0: LCP:  ACFCOMP[2] 
> Dec 19 15:50:53 foobar ppp[50618]: tun0: LCP:  ENDDISC[9] MAC 00:c0:7b:8b:18:6d 
> Dec 19 15:50:53 foobar ppp[50618]: tun0: LCP: deflink: State change Ack-Rcvd --> Opened 
> Dec 19 15:50:53 foobar ppp[50618]: tun0: LCP: deflink: LayerUp 
> Dec 19 15:50:53 foobar ppp[50618]: tun0: LCP: Sending ident magic 723c281c text user-ppp 2.3 (built Dec 18 2000) 
> Dec 19 15:50:53 foobar ppp[50618]: tun0: LCP: deflink: SendIdent(1) state = Opened 
> Dec 19 15:50:53 foobar ppp[50618]: tun0: Phase: bundle: Authenticate 
> Dec 19 15:50:53 foobar ppp[50618]: tun0: Phase: deflink: his = CHAP 0x05, mine = none 
> Dec 19 15:50:53 foobar ppp[50618]: tun0: Phase: Chap Input: CHALLENGE (16 bytes from tnt4.waldorf) 
> Dec 19 15:50:53 foobar ppp[50618]: tun0: Phase: Chap Output: RESPONSE (patseal) 
> Dec 19 15:50:53 foobar ppp[50618]: tun0: Phase: Chap Input: FAILURE 
> 
> 
> -- 
> ------------------------------------ _____________________________________
> Patrick Seal                        |"Microsoft isn't evil, they just make
> <patseal@hyperhost.net>             |   really crappy operating systems."
> Hyperhost - http://www.hyperhost.net| -Linus Torvalds
> 
> 
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-questions" in the body of the message
> 
> 



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.05.10012192220330.27098-100000>