Date: Wed, 08 Sep 2004 03:30:06 -0400 From: Mike Tancsa <mike@sentex.net> To: freebsd-current@freebsd.org Subject: Re: can't re-use a leaf ? (with boot -v) Message-ID: <6.1.2.0.0.20040908032814.062d9860@64.7.153.2> In-Reply-To: <6.1.2.0.0.20040907141522.06f7d960@64.7.153.2> References: <6.1.2.0.0.20040907141522.06f7d960@64.7.153.2>
index | next in thread | previous in thread | raw e-mail
[-- Attachment #1 --]
At 02:18 PM 07/09/2004, Mike Tancsa wrote:
>In my dmesg, I get this rather odd message in a freshly installed RELENG_5
>(beta 3) box
>
>can't re-use a leaf (%desc)!
>can't re-use a leaf (%driver)!
>can't re-use a leaf (%location)!
>can't re-use a leaf (%pnpinfo)!
>can't re-use a leaf (%parent)!
>
>What do they mean ?
>
>(acpidump -d -v) can be found at www.sentex.net/~mdtancsa/acpidump.txt
Someone suggested I post a boot -v. Attached are the results.
---Mike
[-- Attachment #2 --]
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-BETA3 #0: Tue Sep 7 16:48:03 EDT 2004
mdtancsa@releng-5-pioneer.sentex.ca:/usr/obj/usr/src/sys/pioneer
Preloaded elf kernel "/boot/kernel/kernel" at 0xc082b000.
Preloaded elf module "/boot/modules/acpi.ko" at 0xc082b200.
Calibrating clock(s) ... i8254 clock: 1193165 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2400408576 Hz
CPU: Intel(R) Celeron(R) CPU 2.40GHz (2400.41-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf29 Stepping = 9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory = 259981312 (247 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c26000 - 0x000000000f363fff, 242475008 bytes (59198 pages)
avail memory = 244858880 (233 MB)
bios32: Found BIOS32 Service Directory header at 0xc00fb830
bios32: Entry = 0xfbcb0 (c00fbcb0) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xbce0
pnpbios: Found PnP BIOS data at 0xc00fc6c0
pnpbios: Entry = f0000:c6f0 Rev = 1.0
Other BIOS signatures found:
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
io: <I/O>
mem: <memory>
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <AOpen AWRDACPI> on motherboard
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000f904
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=25708086)
pcibios: BIOS version 2.10
Found $PIR table, 8 entries at 0xc00fdee0
PCI-Only Interrupts: 5 10 11 12 15
Location Bus Device Pin Link IRQs
slot 1 1 8 A 0x68 3 4 5 7 9 10 11 12 14 15
slot 1 1 8 B 0x69 3 4 5 7 9 10 11 12 14 15
slot 1 1 8 C 0x6a 3 4 5 7 9 10 11 12 14 15
slot 1 1 8 D 0x6b 3 4 5 7 9 10 11 12 14 15
slot 2 1 4 A 0x60 3 4 5 7 9 10 11 12 14 15
slot 2 1 4 B 0x61 3 4 5 7 9 10 11 12 14 15
slot 2 1 4 C 0x62 3 4 5 7 9 10 11 12 14 15
slot 2 1 4 D 0x63 3 4 5 7 9 10 11 12 14 15
slot 3 1 5 A 0x61 3 4 5 7 9 10 11 12 14 15
slot 3 1 5 B 0x62 3 4 5 7 9 10 11 12 14 15
slot 3 1 5 C 0x63 3 4 5 7 9 10 11 12 14 15
slot 3 1 5 D 0x60 3 4 5 7 9 10 11 12 14 15
slot 4 1 10 A 0x62 3 4 5 7 9 10 11 12 14 15
slot 4 1 10 B 0x63 3 4 5 7 9 10 11 12 14 15
slot 4 1 10 C 0x60 3 4 5 7 9 10 11 12 14 15
slot 4 1 10 D 0x61 3 4 5 7 9 10 11 12 14 15
embedded 0 30 A 0x60 3 4 5 7 9 10 11 12 14 15
embedded 0 30 B 0x61 3 4 5 7 9 10 11 12 14 15
embedded 0 30 C 0x62 3 4 5 7 9 10 11 12 14 15
embedded 0 30 D 0x63 3 4 5 7 9 10 11 12 14 15
embedded 0 2 A 0x60 3 4 5 7 9 10 11 12 14 15
embedded 0 2 B 0x61 3 4 5 7 9 10 11 12 14 15
embedded 0 2 C 0x62 3 4 5 7 9 10 11 12 14 15
embedded 0 2 D 0x63 3 4 5 7 9 10 11 12 14 15
embedded 0 31 A 0x62 3 4 5 7 9 10 11 12 14 15
embedded 0 31 B 0x61 3 4 5 7 9 10 11 12 14 15
embedded 0 31 C 0x60 3 4 5 7 9 10 11 12 14 15
embedded 0 31 D 0x63 3 4 5 7 9 10 11 12 14 15
embedded 0 29 A 0x60 3 4 5 7 9 10 11 12 14 15
embedded 0 29 B 0x63 3 4 5 7 9 10 11 12 14 15
embedded 0 29 C 0x62 3 4 5 7 9 10 11 12 14 15
embedded 0 29 D 0x6b 3 4 5 7 9 10 11 12 14 15
AcpiOsDerivePciId: bus 0 dev 31 func 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi0: Power Button (fixed)
atpic: Programming IRQ9 as level/low
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
unknown: not probed (disabled)
cpu0: <ACPI CPU> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI PCI link initial configuration:
\\_SB_.PCI0.LNKA irq 0: [ 3 4 5 7 9 10 11 12 14 15] 15+ low,level,sharable 0.2.0
\\_SB_.PCI0.LNKB irq 0: [ 3 4 5 7 9 10 11 12 14 15] 12+ low,level,sharable 0.2.1
\\_SB_.PCI0.LNKC irq 0: [ 3 4 5 7 9 10 11 12 14 15] 10+ low,level,sharable 0.2.2
\\_SB_.PCI0.LNKD irq 0: [ 3 4 5 7 9 10 11 12 14 15] 5+ low,level,sharable 0.2.3
\\_SB_.PCI0.LNKA irq 0: [ 3 4 5 7 9 10 11 12 14 15] 15+ low,level,sharable 0.31.2
\\_SB_.PCI0.LNKC irq 0: [ 3 4 5 7 9 10 11 12 14 15] 10+ low,level,sharable 0.31.0
\\_SB_.PCI0.LNKB irq 0: [ 3 4 5 7 9 10 11 12 14 15] 12+ low,level,sharable 0.31.1
\\_SB_.PCI0.LNKA irq 0: [ 3 4 5 7 9 10 11 12 14 15] 15+ low,level,sharable 0.29.0
\\_SB_.PCI0.LNKD irq 0: [ 3 4 5 7 9 10 11 12 14 15] 5+ low,level,sharable 0.29.1
\\_SB_.PCI0.LNKC irq 0: [ 3 4 5 7 9 10 11 12 14 15] 10+ low,level,sharable 0.29.2
\\_SB_.PCI0.LNK1 irq 0: [ 3 4 5 7 9 10 11 12 14 15] 0+ low,level,sharable 0.29.3
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base e0000000, size 28, enabled
found-> vendor=0x8086, dev=0x2570, revid=0x02
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 3, range 32, base f0000000, size 27, enabled
map[14]: type 1, range 32, base fa000000, size 19, enabled
map[18]: type 4, range 32, base 0000d000, size 3, enabled
pcib0: matched entry for 0.2.INTA (src \\_SB_.PCI0.LNKA)
pcib0: possible interrupts: 3 4 5 7 9 10 11 12 14 15
ACPI PCI link arbitrated settings:
\\_SB_.PCI0.LNKA (references 3, priority 36378):
interrupts: 11 10 5 9 12 7 4 3 15 14
penalty: 110 110 160 220 5110 5110 5110 5110 50110 50110
\\_SB_.PCI0.LNKC (references 3, priority 36378):
interrupts: 11 10 5 9 12 7 4 3 15 14
penalty: 110 110 160 220 5110 5110 5110 5110 50110 50110
\\_SB_.PCI0.LNKB (references 2, priority 24252):
interrupts: 11 10 5 9 12 7 4 3 15 14
penalty: 110 110 160 220 5110 5110 5110 5110 50110 50110
\\_SB_.PCI0.LNKD (references 2, priority 24252):
interrupts: 11 10 5 9 12 7 4 3 15 14
penalty: 110 110 160 220 5110 5110 5110 5110 50110 50110
\\_SB_.PCI0.LNK1 (references 1, priority 12126):
interrupts: 11 10 5 9 12 7 4 3 15 14
penalty: 110 110 160 220 5110 5110 5110 5110 50110 50110
pcib0: slot 2 INTA routed to irq 15 via \\_SB_.PCI0.LNKA
found-> vendor=0x8086, dev=0x2572, revid=0x02
bus=0, slot=2, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=15
powerspec 1 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000c000, size 5, enabled
pcib0: matched entry for 0.29.INTA (src \\_SB_.PCI0.LNKA)
pcib0: slot 29 INTA is already routed to irq 15
found-> vendor=0x8086, dev=0x24d2, revid=0x02
bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=15
map[20]: type 4, range 32, base 0000c400, size 5, enabled
pcib0: matched entry for 0.29.INTB (src \\_SB_.PCI0.LNKD)
pcib0: possible interrupts: 3 4 5 7 9 10 11 12 14 15
ACPI PCI link arbitrated settings:
\\_SB_.PCI0.LNKC (references 3, priority 36750):
interrupts: 11 10 5 9 12 7 4 3 14 15
penalty: 220 220 270 440 5220 5220 5220 5220 50220 50250
\\_SB_.PCI0.LNKB (references 2, priority 24500):
interrupts: 11 10 5 9 12 7 4 3 14 15
penalty: 220 220 270 440 5220 5220 5220 5220 50220 50250
\\_SB_.PCI0.LNKD (references 2, priority 24500):
interrupts: 11 10 5 9 12 7 4 3 14 15
penalty: 220 220 270 440 5220 5220 5220 5220 50220 50250
\\_SB_.PCI0.LNK1 (references 1, priority 12250):
interrupts: 11 10 5 9 12 7 4 3 14 15
penalty: 220 220 270 440 5220 5220 5220 5220 50220 50250
pcib0: slot 29 INTB routed to irq 5 via \\_SB_.PCI0.LNKD
found-> vendor=0x8086, dev=0x24d4, revid=0x02
bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=5
map[20]: type 4, range 32, base 0000c800, size 5, enabled
pcib0: matched entry for 0.29.INTC (src \\_SB_.PCI0.LNKC)
pcib0: possible interrupts: 3 4 5 7 9 10 11 12 14 15
ACPI PCI link arbitrated settings:
\\_SB_.PCI0.LNKC (references 3, priority 37119):
interrupts: 11 10 5 9 12 7 4 3 14 15
penalty: 330 330 400 660 5330 5330 5330 5330 50330 50360
\\_SB_.PCI0.LNKB (references 2, priority 24746):
interrupts: 11 10 5 9 12 7 4 3 14 15
penalty: 330 330 400 660 5330 5330 5330 5330 50330 50360
\\_SB_.PCI0.LNK1 (references 1, priority 12373):
interrupts: 11 10 5 9 12 7 4 3 14 15
penalty: 330 330 400 660 5330 5330 5330 5330 50330 50360
pcib0: slot 29 INTC routed to irq 10 via \\_SB_.PCI0.LNKC
found-> vendor=0x8086, dev=0x24d7, revid=0x02
bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=10
map[20]: type 4, range 32, base 0000cc00, size 5, enabled
pcib0: matched entry for 0.29.INTA (src \\_SB_.PCI0.LNKA)
pcib0: slot 29 INTA is already routed to irq 15
found-> vendor=0x8086, dev=0x24de, revid=0x02
bus=0, slot=29, func=3
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=15
found-> vendor=0x8086, dev=0x244e, revid=0xc2
bus=0, slot=30, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0080, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x24d0, revid=0x02
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000f000, size 4, enabled
found-> vendor=0x8086, dev=0x24db, revid=0x02
bus=0, slot=31, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0288, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[20]: type 4, range 32, base 00005000, size 5, enabled
pcib0: matched entry for 0.31.INTB (src \\_SB_.PCI0.LNKB)
pcib0: possible interrupts: 3 4 5 7 9 10 11 12 14 15
ACPI PCI link arbitrated settings:
\\_SB_.PCI0.LNKB (references 2, priority 24994):
interrupts: 11 10 5 9 12 7 4 3 14 15
penalty: 440 470 510 880 5440 5440 5440 5440 50440 50470
\\_SB_.PCI0.LNK1 (references 1, priority 12497):
interrupts: 11 10 5 9 12 7 4 3 14 15
penalty: 440 470 510 880 5440 5440 5440 5440 50440 50470
pcib0: slot 31 INTB routed to irq 12 via \\_SB_.PCI0.LNKB
found-> vendor=0x8086, dev=0x24d3, revid=0x02
bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=12
agp0: <Intel 82865G (865G GMCH) SVGA controller> port 0xd000-0xd007 mem 0xfa000000-0xfa07ffff,0xf0000000-0xf7ffffff irq 15 at device 2.0 on pci0
agp0: Reserved 0x8000000 bytes for rid 0x10 type 3 at 0xf0000000
agp0: Reserved 0x80000 bytes for rid 0x14 type 3 at 0xfa000000
agp0: detected 8060k stolen memory
agp0: aperture size is 128M
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xc000-0xc01f irq 15 at device 29.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xc000
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xc400-0xc41f irq 5 at device 29.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xc400
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xc800-0xc81f irq 10 at device 29.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xc800
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xcc00-0xcc1f irq 15 at device 29.3 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xcc00
uhci3: [GIANT-LOCKED]
usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xa000-0xbfff
pcib1: memory decode 0xf8000000-0xf9ffffff
pcib1: prefetched decode 0xfff00000-0xfffff
pcib1: Subtractively decoded bridge.
ACPI PCI link initial configuration:
\\_SB_.PCI0.LNKE irq 0: [ 3 4 5 7 9 10 11 12 14 15] 11+ low,level,sharable 1.8.0
\\_SB_.PCI0.LNKF irq 0: [ 3 4 5 7 9 10 11 12 14 15] 0+ low,level,sharable 1.8.1
\\_SB_.PCI0.LNK0 irq 0: [ 3 4 5 7 9 10 11 12 14 15] 0+ low,level,sharable 1.8.2
\\_SB_.PCI0.LNK1 irq 0: [ 3 4 5 7 9 10 11 12 14 15] 0+ low,level,sharable 1.8.3
\\_SB_.PCI0.LNKA irq*15: [ 3 4 5 7 9 10 11 12 14 15] 15+ low,level,sharable 1.4.0
\\_SB_.PCI0.LNKB irq*12: [ 3 4 5 7 9 10 11 12 14 15] 12+ low,level,sharable 1.4.1
\\_SB_.PCI0.LNKC irq*10: [ 3 4 5 7 9 10 11 12 14 15] 10+ low,level,sharable 1.4.2
\\_SB_.PCI0.LNKD irq* 5: [ 3 4 5 7 9 10 11 12 14 15] 5+ low,level,sharable 1.4.3
\\_SB_.PCI0.LNKB irq*12: [ 3 4 5 7 9 10 11 12 14 15] 12+ low,level,sharable 1.5.0
\\_SB_.PCI0.LNKC irq*10: [ 3 4 5 7 9 10 11 12 14 15] 10+ low,level,sharable 1.5.1
\\_SB_.PCI0.LNKD irq* 5: [ 3 4 5 7 9 10 11 12 14 15] 5+ low,level,sharable 1.5.2
\\_SB_.PCI0.LNKA irq*15: [ 3 4 5 7 9 10 11 12 14 15] 15+ low,level,sharable 1.5.3
\\_SB_.PCI0.LNKC irq*10: [ 3 4 5 7 9 10 11 12 14 15] 10+ low,level,sharable 1.10.0
\\_SB_.PCI0.LNKD irq* 5: [ 3 4 5 7 9 10 11 12 14 15] 5+ low,level,sharable 1.10.1
\\_SB_.PCI0.LNKA irq*15: [ 3 4 5 7 9 10 11 12 14 15] 15+ low,level,sharable 1.10.2
\\_SB_.PCI0.LNKB irq*12: [ 3 4 5 7 9 10 11 12 14 15] 12+ low,level,sharable 1.10.3
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 4, range 32, base 0000a000, size 8, enabled
pcib1: device (null) requested decoded I/O range 0xa000-0xa0ff
map[14]: type 1, range 32, base f9000000, size 8, enabled
pcib1: device (null) requested decoded memory range 0xf9000000-0xf90000ff
pcib1: matched entry for 1.4.INTA (src \\_SB_.PCI0.LNKA)
pcib1: slot 4 INTA is already routed to irq 15
found-> vendor=0x10ec, dev=0x8139, revid=0x10
bus=1, slot=4, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns)
intpin=a, irq=15
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000a400, size 3, enabled
pcib1: device (null) requested decoded I/O range 0xa400-0xa407
pcib1: matched entry for 1.5.INTA (src \\_SB_.PCI0.LNKB)
pcib1: slot 5 INTA is already routed to irq 12
found-> vendor=0x151f, dev=0x0000, revid=0x00
bus=1, slot=5, func=0
class=07-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=12
map[10]: type 1, range 32, base f9001000, size 12, enabled
pcib1: device (null) requested decoded memory range 0xf9001000-0xf9001fff
map[14]: type 4, range 32, base 0000a800, size 6, enabled
pcib1: device (null) requested decoded I/O range 0xa800-0xa83f
pcib1: matched entry for 1.8.INTA (src \\_SB_.PCI0.LNKE)
pcib1: possible interrupts: 3 4 5 7 9 10 11 12 14 15
ACPI PCI link arbitrated settings:
\\_SB_.PCI0.LNK1 (references 2, priority 25638):
interrupts: 11 10 5 9 7 4 3 12 14 15
penalty: 760 790 830 1200 5760 5760 5760 5780 50760 50790
\\_SB_.PCI0.LNKE (references 1, priority 12819):
interrupts: 11 10 5 9 7 4 3 12 14 15
penalty: 760 790 830 1200 5760 5760 5760 5780 50760 50790
\\_SB_.PCI0.LNKF (references 1, priority 12819):
interrupts: 11 10 5 9 7 4 3 12 14 15
penalty: 760 790 830 1200 5760 5760 5760 5780 50760 50790
\\_SB_.PCI0.LNK0 (references 1, priority 12819):
interrupts: 11 10 5 9 7 4 3 12 14 15
penalty: 760 790 830 1200 5760 5760 5760 5780 50760 50790
pcib1: slot 8 INTA routed to irq 11 via \\_SB_.PCI0.LNKE
found-> vendor=0x8086, dev=0x1050, revid=0x02
bus=1, slot=8, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000ac00, size 3, enabled
pcib1: device (null) requested decoded I/O range 0xac00-0xac07
map[14]: type 4, range 32, base 0000b000, size 3, enabled
pcib1: device (null) requested decoded I/O range 0xb000-0xb007
pcib1: matched entry for 1.10.INTA (src \\_SB_.PCI0.LNKC)
pcib1: slot 10 INTA is already routed to irq 10
found-> vendor=0x1407, dev=0x0120, revid=0x00
bus=1, slot=10, func=0
class=07-00-02, hdrtype=0x00, mfdev=1
cmdreg=0x0001, statreg=0x0480, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
map[10]: type 4, range 32, base 0000b400, size 3, enabled
pcib1: device (null) requested decoded I/O range 0xb400-0xb407
map[14]: type 4, range 32, base 0000b800, size 3, enabled
pcib1: device (null) requested decoded I/O range 0xb800-0xb807
pcib1: matched entry for 1.10.INTA (src \\_SB_.PCI0.LNKC)
pcib1: slot 10 INTA is already routed to irq 10
found-> vendor=0x1407, dev=0x0121, revid=0x00
bus=1, slot=10, func=1
class=07-00-02, hdrtype=0x00, mfdev=1
cmdreg=0x0001, statreg=0x0480, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
rl0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xa000
rl0: <RealTek 8139 10/100BaseTX> port 0xa000-0xa0ff mem 0xf9000000-0xf90000ff irq 15 at device 4.0 on pci1
pcib1: device rl0 requested decoded I/O range 0xa000-0xa0ff
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: bpf attached
rl0: Ethernet address: 00:50:fc:ef:00:96
rl0: [MPSAFE]
sio0: Reserved 0x8 bytes for rid 0x10 type 4 at 0xa400
sio0: irq maps: 0x1 0x1001 0x1 0x1
sio0: <SmartLink 5634PCV SurfRider> port 0xa400-0xa407 irq 12 at device 5.0 on pci1
sio0: moving to sio4
pcib1: device sio4 requested decoded I/O range 0xa400-0xa407
sio4: type 16550A
fxp0: <Intel 82801BA (D865) Pro/100 VE Ethernet> port 0xa800-0xa83f mem 0xf9001000-0xf9001fff irq 11 at device 8.0 on pci1
fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xf9001000
fxp0: using memory space register mapping
fxp0: PCI IDs: 8086 1050 a0a0 04bb 0002
fxp0: Dynamic Standby mode is enabled
miibus1: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> on miibus1
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
fxp0: Ethernet address: 00:01:80:54:b7:09
fxp0: [MPSAFE]
puc0: <Lava Computers Quattro-PCI serial port> port 0xb000-0xb007,0xac00-0xac07 irq 10 at device 10.0 on pci1
puc0: Reserved 0x8 bytes for rid 0x10 type 4 at 0xac00
puc0: Reserved 0x8 bytes for rid 0x14 type 4 at 0xb000
sio5: <Lava Computers Quattro-PCI serial port> on puc0
sio5: type 16550A
sio5: unable to activate interrupt in fast mode - using normal mode
sio6: <Lava Computers Quattro-PCI serial port> on puc0
sio6: type 16550A
sio6: unable to activate interrupt in fast mode - using normal mode
puc1: <Lava Computers Quattro-PCI serial port> port 0xb800-0xb807,0xb400-0xb407 irq 10 at device 10.1 on pci1
puc1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xb400
puc1: Reserved 0x8 bytes for rid 0x14 type 4 at 0xb800
sio7: <Lava Computers Quattro-PCI serial port> on puc1
sio7: type 16550A
sio7: unable to activate interrupt in fast mode - using normal mode
sio8: <Lava Computers Quattro-PCI serial port> on puc1
sio8: type 16550A
sio8: unable to activate interrupt in fast mode - using normal mode
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port 0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xf000
ata0: channel #0 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x90 err=0x90 lsb=0x90 msb=0x90
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: [MPSAFE]
ata1: channel #1 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ata1: [MPSAFE]
ichsmb0: <Intel 82801EB (ICH5) SMBus controller> port 0x5000-0x501f irq 12 at device 31.3 on pci0
ichsmb0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x5000
device_attach: ichsmb0 attach returned 6
fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
sio0: irq maps: 0x1 0x11 0x1 0x1
can't re-use a leaf (%desc)!
can't re-use a leaf (%driver)!
can't re-use a leaf (%location)!
can't re-use a leaf (%pnpinfo)!
can't re-use a leaf (%parent)!
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A, console
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x1d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
sc: sc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
vga: vga0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xc0000-0xc9fff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x0>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0 failed to probe at irq 7 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 2400408576 Hz quality 800
Timecounters tick every 10.000 msec
lo0: bpf attached
ipfw2 initialized, divert disabled, rule-based forwarding disabled, default to accept, logging limited to 2100 packets/entry by default
ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata0-master: setting PIO4 on Intel ICH5 chip
ata0-master: setting UDMA100 on Intel ICH5 chip
ad0: <ST340014A/3.06> ATA-6 disk at ata0-master
ad0: 38166MB (78165360 sectors), 77545 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
GEOM: new disk ad0
ar: FreeBSD check1 failed
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:78156162
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 40015954944 end 40015987199
GEOM: Configure ad0s1a, start 0 length 524288000 end 524287999
GEOM: Configure ad0s1b, start 524288000 length 1073741824 end 1598029823
GEOM: Configure ad0s1c, start 0 length 40015954944 end 40015954943
GEOM: Configure ad0s1d, start 1598029824 length 2147483648 end 3745513471
GEOM: Configure ad0s1e, start 3745513472 length 21474836480 end 25220349951
GEOM: Configure ad0s1f, start 25220349952 length 14795604992 end 40015954943
Mounting root from ufs:/dev/ad0s1a
start_init: trying /sbin/init
help
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?6.1.2.0.0.20040908032814.062d9860>