Date: Wed, 6 Dec 2000 15:47:13 GMT From: postmaster@freebie.demon.nl To: Andrew Gallatin <gallatin@cs.duke.edu>, wkb@freebie.demon.nl, freebsd-alpha@freebsd.org Subject: Re: Lynx test / 2nd attempt Message-ID: <E143gmn-0004am-00@post.mail.nl.demon.net>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --] Take 3 log attached. In short: ENOJOY W/ > OK, Lynx take three: > > http://people.FreeBSD.org/~gallatin/kern.flp > md5 /tmp/kern.flp > MD5 (/tmp/kern.flp) = 4b2476bc8430d8475ad1154b5d55e22d > > This time I think we're getting somewhere. The PC the SRM console > gave you when you halted the machine shows the machine is in the > middle of dispatching an interrupt. > > So it looks like simply not EOI'ing an interrupt source is not enough > to prevent further interrupts from that same source on lynx (like it > is on sable). So the new kernel will disable an interrupt source at > the chipset level when it comes in. Maybe this will work. You'll see > 100 interupts worth of "enabling irq #" and "disabling irq #" > > If it doesn't work, please ask the SRM console what the RA is when you > halt the machine (">>>e ra" should do it). > > You needn't bother with a verbose boot; none of my debugging info is > hidden behind bootverbose. > > Thanks! > > Drew > > [-- Attachment #2 --] Script started on Wed Dec 6 15:09:57 2000 bash-2.04# bash-2.04# tip a connected P00>>> P00>>>boot dva0 (boot dva0.0.0.1000.0 -flags 0,0) block 0 of dva0.0.0.1000.0 is a valid boot block reading 15 blocks from dva0.0.0.1000.0 bootstrap code read in base = 200000, image_start = 0, image_bytes = 1e00 initializing HWRPB at 2000 initializing page table at 7ff0000 initializing machine state setting affinity to the primary CPU jumping to bootstrap code |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/Loading /boot/loader -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-Console: SRM firmware console VMS PAL rev: 0x4000700010538 OSF PAL rev: 0x4000c0002012d Switch to OSF PAL code succeeded. FreeBSD/alpha SRM disk boot, Revision 1.1 (rootk@quynh.nuxi.com, Mon Nov 27 05:39:53 GMT 2000) Memory: 131072 k |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|//kernel data=0x29dba8+0x2b448 -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/- Please insert MFS root floppy and press enter: \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\ Hit [Enter] to boot immediately, or any other key for command prompt. Booting [/kernel] in 9 seconds... Booting [/kernel] in 8 seconds... Booting [/kernel] in 7 seconds... Booting [/kernel] in 6 seconds... Booting [/kernel] in 5 seconds... Booting [/kernel] in 4 seconds... Booting [/kernel] in 3 seconds... Booting [/kernel] in 2 seconds... Booting [/kernel] in 1 second... Booting [/kernel]... |/-\|/Entering kernel at 0xfffffc0000328200... Console: SRM firmware console panic: zfree(0x2003f250,32): wild pointer halted CPU 0 halt code = 5 HALT instruction executed PC = 2001fce0 P00>>> P00>>> P00>>>boot dva0 (boot dva0.0.0.1000.0 -flags 0,0) block 0 of dva0.0.0.1000.0 is a valid boot block reading 15 blocks from dva0.0.0.1000.0 bootstrap code read in base = 200000, image_start = 0, image_bytes = 1e00 initializing HWRPB at 2000 initializing page table at 7ff0000 initializing machine state setting affinity to the primary CPU jumping to bootstrap code |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/Loading /boot/loader VMS PALcode V5.56-7 , OSF PALcode V1.45-12 starting console on CPU 0 initialized idle PCB initializing semaphores initializing heap initial heap 1c0c0 memory low limit = 13c000 heap = 1c0c0, 13fc0 initializing driver structures initializing idle process PID XDELTA not enabled initializing file system initializing timer data structures lowering IPL CPU 0 speed is 5.26 ns (190MHz) create dead_eater create poll create timer create powerup access NVRAM entering idle loop Starting Memory Diagnostics Testing CSIC on Memory Module 0 Testing all memory banks in parallel Testing Memory bank 0 Testing Memory bank 1 Testing Memory bank 2 Testing Memory bank 3 Configuring Memory Modules Configured memory size = 8000000 Memory Diagnostics completed probing hose 0, PCI probing PCI-to-EISA bridge, bus 1 probing PCI-to-PCI bridge, bus 2 bus 1, slot 1 -- vga -- Compaq Qvision bus 1, slot 3 -- dra -- Mylex DAC960 bus 2, slot 1 -- pka -- NCR 53C810 bus 2, slot 6 -- drb -- Mylex DAC960 bus 0, slot 7 -- ewa -- DECchip 21040-AA bus 0, slot 9 -- pkb -- QLogic ISP1020 initializing keyboard os_type: UNIX - console CIPCA driver not started Memory Testing and Configuration Status Module Size Base Addr Intlv Mode Intlv Unit Status ------ ----- --------- ---------- ---------- ------ 0 128MB 00000000 1-Way 0 Passed Total Bad Pages 0 AlphaServer 2100A Console V5.3-10, built on Oct 16 1998 at 14:06:58 P00>>> P00>>> P00>>> P00>>>boot dva0 (boot dva0.0.0.1000.0 -flags 0,0) block 0 of dva0.0.0.1000.0 is a valid boot block reading 15 blocks from dva0.0.0.1000.0 bootstrap code read in base = 200000, image_start = 0, image_bytes = 1e00 initializing HWRPB at 2000 initializing page table at 7ff0000 initializing machine state setting affinity to the primary CPU jumping to bootstrap code |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/Loading /boot/loader -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-Console: SRM firmware console VMS PAL rev: 0x4000700010538 OSF PAL rev: 0x4000c0002012d Switch to OSF PAL code succeeded. FreeBSD/alpha SRM disk boot, Revision 1.1 (rootk@quynh.nuxi.com, Mon Nov 27 05:39:53 GMT 2000) Memory: 131072 k |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|//kernel data=0x29dba8+0x2b448 -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/- Please insert MFS root floppy and press enter: \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\ Hit [Enter] to boot immediately, or any other key for command prompt. Booting [/kernel] in 9 seconds... Booting [/kernel] in 8 seconds... Booting [/kernel] in 7 seconds... Booting [/kernel] in 6 seconds... Booting [/kernel]... |/-\|/Entering kernel at 0xfffffc0000328200... Console: SRM firmware console panic: zfree(0x2003f250,32): wild pointer halted CPU 0 halt code = 5 HALT instruction executed PC = 2001fce0 P00>>>~ [EOT] bash-2.04# bash-2.04# exit Script done on Wed Dec 6 15:40:20 2000
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?E143gmn-0004am-00>