Date: Tue, 16 May 2006 11:00:52 -0700 From: "Gayn Winters" <gayn.winters@bristolsystems.com> To: =?iso-8859-1?Q?'Nagy_L=E1szl=F3_Zsolt'?= <nagylzs@freemail.hu>, <freebsd-questions@freebsd.org> Subject: RE: gmirror and partitioning Message-ID: <021f01c67912$af05c140$6501a8c0@workdog> In-Reply-To: <446A0EA7.1020006@freemail.hu>
index | next in thread | previous in thread | raw e-mail
> From: Nagy László Zsolt [mailto:nagylzs@freemail.hu] > Sent: Tuesday, May 16, 2006 10:41 AM > To: gayn.winters@bristolsystems.com; freebsd-questions@freebsd.org > Subject: Re: gmirror and partitioning > > > Hi Laszlo, > > > > Well it looks like you've got gm0 up and running. I assume you've > > edited /etc/fstab so that it boots cleanly. My first > thought is that > > you need to zero ad8 to make sure gmirror isn't confused. > Try that (dd > > if=/dev/zero of=/dev/ad8) at least for several blocks. > Then reboot and > > post dmesg. > > > > Hello Gayns, > > Good to see you again. :-) > > backupserver# dd if=/dev/zero of=/dev/ad8 count=4096 > 4096+0 records in > 4096+0 records out > 2097152 bytes transferred in 0.686872 secs (3053192 bytes/sec) > > < then I rebooted > > > backupserver# gmirror insert gm0 /dev/ad8 > Provider ad8 too small. > > Here are the important parts from my dmesg: > > ... > > atapci0: <ITE IT8212F UDMA133 controller> port > 0x9010-0x9017,0x9400-0x9403,0x9810-0x9817,0x9c00-0x9c03,0xa000-0xa00f > irq 22 at device 6.0 on pci4 > ata2: <ATA channel 0> on atapci0 > ata3: <ATA channel 1> on atapci0 > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > atapci1: <Intel ICH7 UDMA100 controller> port > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device > 31.1 on pci0 > ata0: <ATA channel 0> on atapci1 > ata1: <ATA channel 1> on atapci1 > atapci2: <Intel ICH7 SATA300 controller> port > 0xd000-0xd007,0xd400-0xd403,0xd800-0xd807,0xdc00-0xdc03,0xe000-0xe00f > irq 19 at device 31.2 on pci0 > atapci2: failed to enable memory mapping! > > .... > > acd0: CDROM <GCR-8523B/1.01> at ata0-master PIO4 > ad8: 152626MB <SAMSUNG HD160JJ ZM100-33> at ata4-master SATA150 > ad10: 152627MB <SAMSUNG HD160JJ ZM100-33> at ata5-master SATA150 > SMP: AP CPU #1 Launched! > GEOM_MIRROR: Device gm0 created (id=934763830). > GEOM_MIRROR: Device gm0: provider ad10 detected. > GEOM_MIRROR: Device gm0: provider ad10 activated. > GEOM_MIRROR: Device gm0: provider mirror/gm0 launched. > Trying to mount root from ufs:/dev/mirror/gm0s1a > bge0: link state changed to UP > > > This is really wreid! The hard disks are the same: SAMSUNG HD160JJ > ZM100-33. But one is bigger than the other. How could this happen? > Should I reinstall everything from the beginning? :-( > > > Best, > > Laszlo Sadly, yes; or buy a bigger second disk. You could do the install on the smaller disk first, or you could make ad10s1 smaller. -gayn Bristol Systems Inc. 714/532-6776 www.bristolsystems.comhelp
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?021f01c67912$af05c140$6501a8c0>