Date: Wed, 24 Aug 2016 04:57:30 +0000 (UTC) From: Cy Schubert <cy@FreeBSD.org> To: src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-vendor@freebsd.org Subject: svn commit: r304732 - in vendor/sqlite3/dist: . tea tea/doc tea/generic tea/tclconfig tea/win Message-ID: <201608240457.u7O4vUlf043748@repo.freebsd.org>
next in thread | raw e-mail | index | archive | help
Author: cy Date: Wed Aug 24 04:57:29 2016 New Revision: 304732 URL: https://svnweb.freebsd.org/changeset/base/304732 Log: Import sqlite3-3.14.1 (3140100) Added: vendor/sqlite3/dist/Makefile.msc (contents, props changed) vendor/sqlite3/dist/Replace.cs vendor/sqlite3/dist/compile (contents, props changed) vendor/sqlite3/dist/sqlite3.rc vendor/sqlite3/dist/tea/ vendor/sqlite3/dist/tea/Makefile.in (contents, props changed) vendor/sqlite3/dist/tea/README vendor/sqlite3/dist/tea/aclocal.m4 vendor/sqlite3/dist/tea/configure (contents, props changed) vendor/sqlite3/dist/tea/configure.ac vendor/sqlite3/dist/tea/doc/ vendor/sqlite3/dist/tea/doc/sqlite3.n vendor/sqlite3/dist/tea/generic/ vendor/sqlite3/dist/tea/generic/tclsqlite3.c (contents, props changed) vendor/sqlite3/dist/tea/license.terms vendor/sqlite3/dist/tea/pkgIndex.tcl.in (contents, props changed) vendor/sqlite3/dist/tea/tclconfig/ vendor/sqlite3/dist/tea/tclconfig/install-sh vendor/sqlite3/dist/tea/tclconfig/tcl.m4 vendor/sqlite3/dist/tea/win/ vendor/sqlite3/dist/tea/win/makefile.vc (contents, props changed) vendor/sqlite3/dist/tea/win/nmakehlp.c (contents, props changed) vendor/sqlite3/dist/tea/win/rules.vc Modified: vendor/sqlite3/dist/Makefile.am vendor/sqlite3/dist/Makefile.in vendor/sqlite3/dist/configure vendor/sqlite3/dist/configure.ac vendor/sqlite3/dist/shell.c vendor/sqlite3/dist/sqlite3.c vendor/sqlite3/dist/sqlite3.h vendor/sqlite3/dist/sqlite3ext.h Modified: vendor/sqlite3/dist/Makefile.am ============================================================================== --- vendor/sqlite3/dist/Makefile.am Wed Aug 24 04:56:56 2016 (r304731) +++ vendor/sqlite3/dist/Makefile.am Wed Aug 24 04:57:29 2016 (r304732) @@ -1,5 +1,5 @@ -AM_CFLAGS = @THREADSAFE_FLAGS@ @DYNAMIC_EXTENSION_FLAGS@ @FTS5_FLAGS@ @JSON1_FLAGS@ -DSQLITE_ENABLE_FTS3 -DSQLITE_ENABLE_RTREE +AM_CFLAGS = @THREADSAFE_FLAGS@ @DYNAMIC_EXTENSION_FLAGS@ @FTS5_FLAGS@ @JSON1_FLAGS@ @SESSION_FLAGS@ -DSQLITE_ENABLE_FTS3 -DSQLITE_ENABLE_RTREE lib_LTLIBRARIES = libsqlite3.la libsqlite3_la_SOURCES = sqlite3.c Modified: vendor/sqlite3/dist/Makefile.in ============================================================================== --- vendor/sqlite3/dist/Makefile.in Wed Aug 24 04:56:56 2016 (r304731) +++ vendor/sqlite3/dist/Makefile.in Wed Aug 24 04:57:29 2016 (r304732) @@ -305,6 +305,7 @@ PATH_SEPARATOR = @PATH_SEPARATOR@ RANLIB = @RANLIB@ READLINE_LIBS = @READLINE_LIBS@ SED = @SED@ +SESSION_FLAGS = @SESSION_FLAGS@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ @@ -362,7 +363,7 @@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ -AM_CFLAGS = @THREADSAFE_FLAGS@ @DYNAMIC_EXTENSION_FLAGS@ @FTS5_FLAGS@ @JSON1_FLAGS@ -DSQLITE_ENABLE_FTS3 -DSQLITE_ENABLE_RTREE +AM_CFLAGS = @THREADSAFE_FLAGS@ @DYNAMIC_EXTENSION_FLAGS@ @FTS5_FLAGS@ @JSON1_FLAGS@ @SESSION_FLAGS@ -DSQLITE_ENABLE_FTS3 -DSQLITE_ENABLE_RTREE lib_LTLIBRARIES = libsqlite3.la libsqlite3_la_SOURCES = sqlite3.c libsqlite3_la_LDFLAGS = -no-undefined -version-info 8:6:8 Added: vendor/sqlite3/dist/Makefile.msc ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ vendor/sqlite3/dist/Makefile.msc Wed Aug 24 04:57:29 2016 (r304732) @@ -0,0 +1,971 @@ +#### DO NOT EDIT #### +# This makefile is automatically generated from the Makefile.msc at +# the root of the canonical SQLite source tree (not the +# amalgamation tarball) using the tool/mkmsvcmin.tcl +# script. +# + +# +# nmake Makefile for SQLite +# +############################################################################### +############################## START OF OPTIONS ############################### +############################################################################### + +# The toplevel directory of the source tree. This is the directory +# that contains this "Makefile.msc". +# +TOP = . + + +# Set this non-0 to enable full warnings (-W4, etc) when compiling. +# +!IFNDEF USE_FULLWARN +USE_FULLWARN = 0 +!ENDIF + +# Set this non-0 to enable full runtime error checks (-RTC1, etc). This +# has no effect if (any) optimizations are enabled. +# +!IFNDEF USE_RUNTIME_CHECKS +USE_RUNTIME_CHECKS = 0 +!ENDIF + +# Set this non-0 to use "stdcall" calling convention for the core library +# and shell executable. +# +!IFNDEF USE_STDCALL +USE_STDCALL = 0 +!ENDIF + +# Set this non-0 to have the shell executable link against the core dynamic +# link library. +# +!IFNDEF DYNAMIC_SHELL +DYNAMIC_SHELL = 0 +!ENDIF + +# Set this non-0 to enable extra code that attempts to detect misuse of the +# SQLite API. +# +!IFNDEF API_ARMOR +API_ARMOR = 0 +!ENDIF + +# If necessary, create a list of harmless compiler warnings to disable when +# compiling the various tools. For the SQLite source code itself, warnings, +# if any, will be disabled from within it. +# +!IFNDEF NO_WARN +!IF $(USE_FULLWARN)!=0 +NO_WARN = -wd4054 -wd4055 -wd4100 -wd4127 -wd4130 -wd4152 -wd4189 -wd4206 +NO_WARN = $(NO_WARN) -wd4210 -wd4232 -wd4305 -wd4306 -wd4702 -wd4706 +!ENDIF +!ENDIF + +# Set this non-0 to use the library paths and other options necessary for +# Windows Phone 8.1. +# +!IFNDEF USE_WP81_OPTS +USE_WP81_OPTS = 0 +!ENDIF + +# Set this non-0 to split the SQLite amalgamation file into chunks to +# be used for debugging with Visual Studio. +# +!IFNDEF SPLIT_AMALGAMATION +SPLIT_AMALGAMATION = 0 +!ENDIF + + +# Set this non-0 to dynamically link to the MSVC runtime library. +# +!IFNDEF USE_CRT_DLL +USE_CRT_DLL = 0 +!ENDIF + +# Set this non-0 to link to the RPCRT4 library. +# +!IFNDEF USE_RPCRT4_LIB +USE_RPCRT4_LIB = 0 +!ENDIF + +# Set this non-0 to generate assembly code listings for the source code +# files. +# +!IFNDEF USE_LISTINGS +USE_LISTINGS = 0 +!ENDIF + +# Set this non-0 to attempt setting the native compiler automatically +# for cross-compiling the command line tools needed during the compilation +# process. +# +!IFNDEF XCOMPILE +XCOMPILE = 0 +!ENDIF + +# Set this non-0 to use the native libraries paths for cross-compiling +# the command line tools needed during the compilation process. +# +!IFNDEF USE_NATIVE_LIBPATHS +USE_NATIVE_LIBPATHS = 0 +!ENDIF + +# Set this 0 to skip the compiling and embedding of version resources. +# +!IFNDEF USE_RC +USE_RC = 1 +!ENDIF + +# Set this non-0 to compile binaries suitable for the WinRT environment. +# This setting does not apply to any binaries that require Tcl to operate +# properly (i.e. the text fixture, etc). +# +!IFNDEF FOR_WINRT +FOR_WINRT = 0 +!ENDIF + +# Set this non-0 to compile binaries suitable for the UWP environment. +# This setting does not apply to any binaries that require Tcl to operate +# properly (i.e. the text fixture, etc). +# +!IFNDEF FOR_UWP +FOR_UWP = 0 +!ENDIF + +# Set this non-0 to compile binaries suitable for the Windows 10 platform. +# +!IFNDEF FOR_WIN10 +FOR_WIN10 = 0 +!ENDIF + + +# Set this to non-0 to create and use PDBs. +# +!IFNDEF SYMBOLS +SYMBOLS = 1 +!ENDIF + +# Set this to non-0 to use the SQLite debugging heap subsystem. +# +!IFNDEF MEMDEBUG +MEMDEBUG = 0 +!ENDIF + +# Set this to non-0 to use the Win32 native heap subsystem. +# +!IFNDEF WIN32HEAP +WIN32HEAP = 0 +!ENDIF + +# Set this to non-0 to enable OSTRACE() macros, which can be useful when +# debugging. +# +!IFNDEF OSTRACE +OSTRACE = 0 +!ENDIF + +# Set this to one of the following values to enable various debugging +# features. Each level includes the debugging options from the previous +# levels. Currently, the recognized values for DEBUG are: +# +# 0 == NDEBUG: Disables assert() and other runtime diagnostics. +# 1 == SQLITE_ENABLE_API_ARMOR: extra attempts to detect misuse of the API. +# 2 == Disables NDEBUG and all optimizations and then enables PDBs. +# 3 == SQLITE_DEBUG: Enables various diagnostics messages and code. +# 4 == SQLITE_WIN32_MALLOC_VALIDATE: Validate the Win32 native heap per call. +# 5 == SQLITE_DEBUG_OS_TRACE: Enables output from the OSTRACE() macros. +# 6 == SQLITE_ENABLE_IOTRACE: Enables output from the IOTRACE() macros. +# +!IFNDEF DEBUG +DEBUG = 0 +!ENDIF + +# Enable use of available compiler optimizations? Normally, this should be +# non-zero. Setting this to zero, thus disabling all compiler optimizations, +# can be useful for testing. +# +!IFNDEF OPTIMIZATIONS +OPTIMIZATIONS = 2 +!ENDIF + +# Set this to non-0 to enable support for the session extension. +# +!IFNDEF SESSION +SESSION = 0 +!ENDIF + +# Set the source code file to be used by executables and libraries when +# they need the amalgamation. +# +!IFNDEF SQLITE3C +!IF $(SPLIT_AMALGAMATION)!=0 +SQLITE3C = sqlite3-all.c +!ELSE +SQLITE3C = sqlite3.c +!ENDIF +!ENDIF + +# Set the include code file to be used by executables and libraries when +# they need SQLite. +# +!IFNDEF SQLITE3H +SQLITE3H = sqlite3.h +!ENDIF + +# This is the name to use for the SQLite dynamic link library (DLL). +# +!IFNDEF SQLITE3DLL +!IF $(FOR_WIN10)!=0 +SQLITE3DLL = winsqlite3.dll +!ELSE +SQLITE3DLL = sqlite3.dll +!ENDIF +!ENDIF + +# This is the name to use for the SQLite import library (LIB). +# +!IFNDEF SQLITE3LIB +!IF $(FOR_WIN10)!=0 +SQLITE3LIB = winsqlite3.lib +!ELSE +SQLITE3LIB = sqlite3.lib +!ENDIF +!ENDIF + +# This is the name to use for the SQLite shell executable (EXE). +# +!IFNDEF SQLITE3EXE +!IF $(FOR_WIN10)!=0 +SQLITE3EXE = winsqlite3shell.exe +!ELSE +SQLITE3EXE = sqlite3.exe +!ENDIF +!ENDIF + +# This is the argument used to set the program database (PDB) file for the +# SQLite shell executable (EXE). +# +!IFNDEF SQLITE3EXEPDB +!IF $(FOR_WIN10)!=0 +SQLITE3EXEPDB = +!ELSE +SQLITE3EXEPDB = /pdb:sqlite3sh.pdb +!ENDIF +!ENDIF + +# These are the "standard" SQLite compilation options used when compiling for +# the Windows platform. +# +!IFNDEF OPT_FEATURE_FLAGS +OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_FTS3=1 +OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_RTREE=1 +OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_COLUMN_METADATA=1 +!ENDIF + +# Should the session extension be enabled? If so, add compilation options +# to enable it. +# +!IF $(SESSION)!=0 +OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_SESSION=1 +OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_PREUPDATE_HOOK=1 +!ENDIF + +# These are the "extended" SQLite compilation options used when compiling for +# the Windows 10 platform. +# +!IFNDEF EXT_FEATURE_FLAGS +!IF $(FOR_WIN10)!=0 +EXT_FEATURE_FLAGS = $(EXT_FEATURE_FLAGS) -DSQLITE_ENABLE_FTS4=1 +EXT_FEATURE_FLAGS = $(EXT_FEATURE_FLAGS) -DSQLITE_SYSTEM_MALLOC=1 +EXT_FEATURE_FLAGS = $(EXT_FEATURE_FLAGS) -DSQLITE_OMIT_LOCALTIME=1 +!ELSE +EXT_FEATURE_FLAGS = +!ENDIF +!ENDIF + +############################################################################### +############################### END OF OPTIONS ################################ +############################################################################### + +# When compiling for the Windows 10 platform, the PLATFORM macro must be set +# to an appropriate value (e.g. x86, x64, arm, arm64, etc). +# +!IF $(FOR_WIN10)!=0 +!IFNDEF PLATFORM +!ERROR Using the FOR_WIN10 option requires a value for PLATFORM. +!ENDIF +!ENDIF + +# This assumes that MSVC is always installed in 32-bit Program Files directory +# and sets the variable for use in locating other 32-bit installs accordingly. +# +PROGRAMFILES_X86 = $(VCINSTALLDIR)\..\.. +PROGRAMFILES_X86 = $(PROGRAMFILES_X86:\\=\) + +# Check for the predefined command macro CC. This should point to the compiler +# binary for the target platform. If it is not defined, simply define it to +# the legacy default value 'cl.exe'. +# +!IFNDEF CC +CC = cl.exe +!ENDIF + +# Check for the predefined command macro CSC. This should point to a working +# C Sharp compiler binary. If it is not defined, simply define it to the +# legacy default value 'csc.exe'. +# +!IFNDEF CSC +CSC = csc.exe +!ENDIF + +# Check for the command macro LD. This should point to the linker binary for +# the target platform. If it is not defined, simply define it to the legacy +# default value 'link.exe'. +# +!IFNDEF LD +LD = link.exe +!ENDIF + +# Check for the predefined command macro RC. This should point to the resource +# compiler binary for the target platform. If it is not defined, simply define +# it to the legacy default value 'rc.exe'. +# +!IFNDEF RC +RC = rc.exe +!ENDIF + +# Check for the MSVC runtime library path macro. Otherwise, this value will +# default to the 'lib' directory underneath the MSVC installation directory. +# +!IFNDEF CRTLIBPATH +CRTLIBPATH = $(VCINSTALLDIR)\lib +!ENDIF + +CRTLIBPATH = $(CRTLIBPATH:\\=\) + +# Check for the command macro NCC. This should point to the compiler binary +# for the platform the compilation process is taking place on. If it is not +# defined, simply define it to have the same value as the CC macro. When +# cross-compiling, it is suggested that this macro be modified via the command +# line (since nmake itself does not provide a built-in method to guess it). +# For example, to use the x86 compiler when cross-compiling for x64, a command +# line similar to the following could be used (all on one line): +# +# nmake /f Makefile.msc sqlite3.dll +# XCOMPILE=1 USE_NATIVE_LIBPATHS=1 +# +# Alternatively, the full path and file name to the compiler binary for the +# platform the compilation process is taking place may be specified (all on +# one line): +# +# nmake /f Makefile.msc sqlite3.dll +# "NCC=""%VCINSTALLDIR%\bin\cl.exe""" +# USE_NATIVE_LIBPATHS=1 +# +!IFDEF NCC +NCC = $(NCC:\\=\) +!ELSEIF $(XCOMPILE)!=0 +NCC = "$(VCINSTALLDIR)\bin\$(CC)" +NCC = $(NCC:\\=\) +!ELSE +NCC = $(CC) +!ENDIF + +# Check for the MSVC native runtime library path macro. Otherwise, +# this value will default to the 'lib' directory underneath the MSVC +# installation directory. +# +!IFNDEF NCRTLIBPATH +NCRTLIBPATH = $(VCINSTALLDIR)\lib +!ENDIF + +NCRTLIBPATH = $(NCRTLIBPATH:\\=\) + +# Check for the Platform SDK library path macro. Otherwise, this +# value will default to the 'lib' directory underneath the Windows +# SDK installation directory (the environment variable used appears +# to be available when using Visual C++ 2008 or later via the +# command line). +# +!IFNDEF NSDKLIBPATH +NSDKLIBPATH = $(WINDOWSSDKDIR)\lib +!ENDIF + +NSDKLIBPATH = $(NSDKLIBPATH:\\=\) + +# Check for the UCRT library path macro. Otherwise, this value will +# default to the version-specific, platform-specific 'lib' directory +# underneath the Windows SDK installation directory. +# +!IFNDEF UCRTLIBPATH +UCRTLIBPATH = $(WINDOWSSDKDIR)\lib\$(WINDOWSSDKLIBVERSION)\ucrt\$(PLATFORM) +!ENDIF + +UCRTLIBPATH = $(UCRTLIBPATH:\\=\) + +# C compiler and options for use in building executables that +# will run on the platform that is doing the build. +# +!IF $(USE_FULLWARN)!=0 +BCC = $(NCC) -nologo -W4 $(CCOPTS) $(BCCOPTS) +!ELSE +BCC = $(NCC) -nologo -W3 $(CCOPTS) $(BCCOPTS) +!ENDIF + +# Check if assembly code listings should be generated for the source +# code files to be compiled. +# +!IF $(USE_LISTINGS)!=0 +BCC = $(BCC) -FAcs +!ENDIF + +# Check if the native library paths should be used when compiling +# the command line tools used during the compilation process. If +# so, set the necessary macro now. +# +!IF $(USE_NATIVE_LIBPATHS)!=0 +NLTLIBPATHS = "/LIBPATH:$(NCRTLIBPATH)" "/LIBPATH:$(NSDKLIBPATH)" + +!IFDEF NUCRTLIBPATH +NUCRTLIBPATH = $(NUCRTLIBPATH:\\=\) +NLTLIBPATHS = $(NLTLIBPATHS) "/LIBPATH:$(NUCRTLIBPATH)" +!ENDIF +!ENDIF + +# C compiler and options for use in building executables that +# will run on the target platform. (BCC and TCC are usually the +# same unless your are cross-compiling.) +# +!IF $(USE_FULLWARN)!=0 +TCC = $(CC) -nologo -W4 -DINCLUDE_MSVC_H=1 $(CCOPTS) $(TCCOPTS) +!ELSE +TCC = $(CC) -nologo -W3 $(CCOPTS) $(TCCOPTS) +!ENDIF + +TCC = $(TCC) -DSQLITE_OS_WIN=1 -I. -I$(TOP) -fp:precise +RCC = $(RC) -DSQLITE_OS_WIN=1 -I. -I$(TOP) $(RCOPTS) $(RCCOPTS) + +# Check if we want to use the "stdcall" calling convention when compiling. +# This is not supported by the compilers for non-x86 platforms. It should +# also be noted here that building any target with these "stdcall" options +# will most likely fail if the Tcl library is also required. This is due +# to how the Tcl library functions are declared and exported (i.e. without +# an explicit calling convention, which results in "cdecl"). +# +!IF $(USE_STDCALL)!=0 || $(FOR_WIN10)!=0 +!IF "$(PLATFORM)"=="x86" +CORE_CCONV_OPTS = -Gz -DSQLITE_CDECL=__cdecl -DSQLITE_APICALL=__stdcall -DSQLITE_CALLBACK=__stdcall -DSQLITE_SYSAPI=__stdcall +SHELL_CCONV_OPTS = -Gz -DSQLITE_CDECL=__cdecl -DSQLITE_APICALL=__stdcall -DSQLITE_CALLBACK=__stdcall -DSQLITE_SYSAPI=__stdcall +!ELSE +!IFNDEF PLATFORM +CORE_CCONV_OPTS = -Gz -DSQLITE_CDECL=__cdecl -DSQLITE_APICALL=__stdcall -DSQLITE_CALLBACK=__stdcall -DSQLITE_SYSAPI=__stdcall +SHELL_CCONV_OPTS = -Gz -DSQLITE_CDECL=__cdecl -DSQLITE_APICALL=__stdcall -DSQLITE_CALLBACK=__stdcall -DSQLITE_SYSAPI=__stdcall +!ELSE +CORE_CCONV_OPTS = +SHELL_CCONV_OPTS = +!ENDIF +!ENDIF +!ELSE +CORE_CCONV_OPTS = +SHELL_CCONV_OPTS = +!ENDIF + +# These are additional compiler options used for the core library. +# +!IFNDEF CORE_COMPILE_OPTS +!IF $(DYNAMIC_SHELL)!=0 || $(FOR_WIN10)!=0 +CORE_COMPILE_OPTS = $(CORE_CCONV_OPTS) -DSQLITE_API=__declspec(dllexport) +!ELSE +CORE_COMPILE_OPTS = $(CORE_CCONV_OPTS) +!ENDIF +!ENDIF + +# These are the additional targets that the core library should depend on +# when linking. +# +!IFNDEF CORE_LINK_DEP +!IF $(DYNAMIC_SHELL)!=0 +CORE_LINK_DEP = +!ELSEIF $(FOR_WIN10)==0 || "$(PLATFORM)"=="x86" +CORE_LINK_DEP = sqlite3.def +!ELSE +CORE_LINK_DEP = +!ENDIF +!ENDIF + +# These are additional linker options used for the core library. +# +!IFNDEF CORE_LINK_OPTS +!IF $(DYNAMIC_SHELL)!=0 +CORE_LINK_OPTS = +!ELSEIF $(FOR_WIN10)==0 || "$(PLATFORM)"=="x86" +CORE_LINK_OPTS = /DEF:sqlite3.def +!ELSE +CORE_LINK_OPTS = +!ENDIF +!ENDIF + +# These are additional compiler options used for the shell executable. +# +!IFNDEF SHELL_COMPILE_OPTS +!IF $(DYNAMIC_SHELL)!=0 || $(FOR_WIN10)!=0 +SHELL_COMPILE_OPTS = $(SHELL_CCONV_OPTS) -DSQLITE_API=__declspec(dllimport) +!ELSE +SHELL_COMPILE_OPTS = $(SHELL_CCONV_OPTS) +!ENDIF +!ENDIF + +# This is the source code that the shell executable should be compiled +# with. +# +!IFNDEF SHELL_CORE_SRC +!IF $(DYNAMIC_SHELL)!=0 || $(FOR_WIN10)!=0 +SHELL_CORE_SRC = +!ELSE +SHELL_CORE_SRC = $(SQLITE3C) +!ENDIF +!ENDIF + +# This is the core library that the shell executable should depend on. +# +!IFNDEF SHELL_CORE_DEP +!IF $(DYNAMIC_SHELL)!=0 || $(FOR_WIN10)!=0 +SHELL_CORE_DEP = $(SQLITE3DLL) +!ELSE +SHELL_CORE_DEP = +!ENDIF +!ENDIF + +# This is the core library that the shell executable should link with. +# +!IFNDEF SHELL_CORE_LIB +!IF $(DYNAMIC_SHELL)!=0 || $(FOR_WIN10)!=0 +SHELL_CORE_LIB = $(SQLITE3LIB) +!ELSE +SHELL_CORE_LIB = +!ENDIF +!ENDIF + +# These are additional linker options used for the shell executable. +# +!IFNDEF SHELL_LINK_OPTS +SHELL_LINK_OPTS = $(SHELL_CORE_LIB) +!ENDIF + +# Check if assembly code listings should be generated for the source +# code files to be compiled. +# +!IF $(USE_LISTINGS)!=0 +TCC = $(TCC) -FAcs +!ENDIF + +# When compiling the library for use in the WinRT environment, +# the following compile-time options must be used as well to +# disable use of Win32 APIs that are not available and to enable +# use of Win32 APIs that are specific to Windows 8 and/or WinRT. +# +!IF $(FOR_WINRT)!=0 +TCC = $(TCC) -DSQLITE_OS_WINRT=1 +RCC = $(RCC) -DSQLITE_OS_WINRT=1 +TCC = $(TCC) -DWINAPI_FAMILY=WINAPI_FAMILY_APP +RCC = $(RCC) -DWINAPI_FAMILY=WINAPI_FAMILY_APP +!ENDIF + +# C compiler options for the Windows 10 platform (needs MSVC 2015). +# +!IF $(FOR_WIN10)!=0 +TCC = $(TCC) /d2guard4 -D_ARM_WINAPI_PARTITION_DESKTOP_SDK_AVAILABLE +BCC = $(BCC) /d2guard4 -D_ARM_WINAPI_PARTITION_DESKTOP_SDK_AVAILABLE +!ENDIF + +# Also, we need to dynamically link to the correct MSVC runtime +# when compiling for WinRT (e.g. debug or release) OR if the +# USE_CRT_DLL option is set to force dynamically linking to the +# MSVC runtime library. +# +!IF $(FOR_WINRT)!=0 || $(USE_CRT_DLL)!=0 +!IF $(DEBUG)>1 +TCC = $(TCC) -MDd +BCC = $(BCC) -MDd +!ELSE +TCC = $(TCC) -MD +BCC = $(BCC) -MD +!ENDIF +!ELSE +!IF $(DEBUG)>1 +TCC = $(TCC) -MTd +BCC = $(BCC) -MTd +!ELSE +TCC = $(TCC) -MT +BCC = $(BCC) -MT +!ENDIF +!ENDIF + + +# Define -DNDEBUG to compile without debugging (i.e., for production usage) +# Omitting the define will cause extra debugging code to be inserted and +# includes extra comments when "EXPLAIN stmt" is used. +# +!IF $(DEBUG)==0 +TCC = $(TCC) -DNDEBUG +BCC = $(BCC) -DNDEBUG +RCC = $(RCC) -DNDEBUG +!ENDIF + +!IF $(DEBUG)>0 || $(API_ARMOR)!=0 || $(FOR_WIN10)!=0 +TCC = $(TCC) -DSQLITE_ENABLE_API_ARMOR=1 +RCC = $(RCC) -DSQLITE_ENABLE_API_ARMOR=1 +!ENDIF + +!IF $(DEBUG)>2 +TCC = $(TCC) -DSQLITE_DEBUG=1 +RCC = $(RCC) -DSQLITE_DEBUG=1 +!ENDIF + +!IF $(DEBUG)>4 || $(OSTRACE)!=0 +TCC = $(TCC) -DSQLITE_FORCE_OS_TRACE=1 -DSQLITE_DEBUG_OS_TRACE=1 +RCC = $(RCC) -DSQLITE_FORCE_OS_TRACE=1 -DSQLITE_DEBUG_OS_TRACE=1 +!ENDIF + +!IF $(DEBUG)>5 +TCC = $(TCC) -DSQLITE_ENABLE_IOTRACE=1 +RCC = $(RCC) -DSQLITE_ENABLE_IOTRACE=1 +!ENDIF + +# Prevent warnings about "insecure" MSVC runtime library functions +# being used. +# +TCC = $(TCC) -D_CRT_SECURE_NO_DEPRECATE -D_CRT_SECURE_NO_WARNINGS +BCC = $(BCC) -D_CRT_SECURE_NO_DEPRECATE -D_CRT_SECURE_NO_WARNINGS +RCC = $(RCC) -D_CRT_SECURE_NO_DEPRECATE -D_CRT_SECURE_NO_WARNINGS + +# Prevent warnings about "deprecated" POSIX functions being used. +# +TCC = $(TCC) -D_CRT_NONSTDC_NO_DEPRECATE -D_CRT_NONSTDC_NO_WARNINGS +BCC = $(BCC) -D_CRT_NONSTDC_NO_DEPRECATE -D_CRT_NONSTDC_NO_WARNINGS +RCC = $(RCC) -D_CRT_NONSTDC_NO_DEPRECATE -D_CRT_NONSTDC_NO_WARNINGS + +# Use the SQLite debugging heap subsystem? +# +!IF $(MEMDEBUG)!=0 +TCC = $(TCC) -DSQLITE_MEMDEBUG=1 +RCC = $(RCC) -DSQLITE_MEMDEBUG=1 + +# Use native Win32 heap subsystem instead of malloc/free? +# +!ELSEIF $(WIN32HEAP)!=0 +TCC = $(TCC) -DSQLITE_WIN32_MALLOC=1 +RCC = $(RCC) -DSQLITE_WIN32_MALLOC=1 + +# Validate the heap on every call into the native Win32 heap subsystem? +# +!IF $(DEBUG)>3 +TCC = $(TCC) -DSQLITE_WIN32_MALLOC_VALIDATE=1 +RCC = $(RCC) -DSQLITE_WIN32_MALLOC_VALIDATE=1 +!ENDIF +!ENDIF + + +# Compiler options needed for programs that use the readline() library. +# +!IFNDEF READLINE_FLAGS +READLINE_FLAGS = -DHAVE_READLINE=0 +!ENDIF + +# The library that programs using readline() must link against. +# +!IFNDEF LIBREADLINE +LIBREADLINE = +!ENDIF + +# Should the database engine be compiled threadsafe +# +TCC = $(TCC) -DSQLITE_THREADSAFE=1 +RCC = $(RCC) -DSQLITE_THREADSAFE=1 + +# Do threads override each others locks by default (1), or do we test (-1) +# +TCC = $(TCC) -DSQLITE_THREAD_OVERRIDE_LOCK=-1 +RCC = $(RCC) -DSQLITE_THREAD_OVERRIDE_LOCK=-1 + +# Any target libraries which libsqlite must be linked against +# +!IFNDEF TLIBS +TLIBS = +!ENDIF + +# Flags controlling use of the in memory btree implementation +# +# SQLITE_TEMP_STORE is 0 to force temporary tables to be in a file, 1 to +# default to file, 2 to default to memory, and 3 to force temporary +# tables to always be in memory. +# +TCC = $(TCC) -DSQLITE_TEMP_STORE=1 +RCC = $(RCC) -DSQLITE_TEMP_STORE=1 + +# Enable/disable loadable extensions, and other optional features +# based on configuration. (-DSQLITE_OMIT*, -DSQLITE_ENABLE*). +# The same set of OMIT and ENABLE flags should be passed to the +# LEMON parser generator and the mkkeywordhash tool as well. + +# These are the required SQLite compilation options used when compiling for +# the Windows platform. +# +REQ_FEATURE_FLAGS = $(REQ_FEATURE_FLAGS) -DSQLITE_MAX_TRIGGER_DEPTH=100 + +# If we are linking to the RPCRT4 library, enable features that need it. +# +!IF $(USE_RPCRT4_LIB)!=0 +REQ_FEATURE_FLAGS = $(REQ_FEATURE_FLAGS) -DSQLITE_WIN32_USE_UUID=1 +!ENDIF + +# Add the required and optional SQLite compilation options into the command +# lines used to invoke the MSVC code and resource compilers. +# +TCC = $(TCC) $(REQ_FEATURE_FLAGS) $(OPT_FEATURE_FLAGS) $(EXT_FEATURE_FLAGS) +RCC = $(RCC) $(REQ_FEATURE_FLAGS) $(OPT_FEATURE_FLAGS) $(EXT_FEATURE_FLAGS) + +# Add in any optional parameters specified on the commane line, e.g. +# nmake /f Makefile.msc all "OPTS=-DSQLITE_ENABLE_FOO=1 -DSQLITE_OMIT_FOO=1" +# +TCC = $(TCC) $(OPTS) +RCC = $(RCC) $(OPTS) + +# If compiling for debugging, add some defines. +# +!IF $(DEBUG)>1 +TCC = $(TCC) -D_DEBUG +BCC = $(BCC) -D_DEBUG +RCC = $(RCC) -D_DEBUG +!ENDIF + +# If optimizations are enabled or disabled (either implicitly or +# explicitly), add the necessary flags. +# +!IF $(DEBUG)>1 || $(OPTIMIZATIONS)==0 +TCC = $(TCC) -Od +BCC = $(BCC) -Od +!IF $(USE_RUNTIME_CHECKS)!=0 +TCC = $(TCC) -RTC1 +BCC = $(BCC) -RTC1 +!ENDIF +!ELSEIF $(OPTIMIZATIONS)>=3 +TCC = $(TCC) -Ox +BCC = $(BCC) -Ox +!ELSEIF $(OPTIMIZATIONS)==2 +TCC = $(TCC) -O2 +BCC = $(BCC) -O2 +!ELSEIF $(OPTIMIZATIONS)==1 +TCC = $(TCC) -O1 +BCC = $(BCC) -O1 +!ENDIF + +# If symbols are enabled (or compiling for debugging), enable PDBs. +# +!IF $(DEBUG)>1 || $(SYMBOLS)!=0 +TCC = $(TCC) -Zi +BCC = $(BCC) -Zi +!ENDIF + + +# Command line prefixes for compiling code, compiling resources, +# linking, etc. +# +LTCOMPILE = $(TCC) -Fo$@ +LTRCOMPILE = $(RCC) -r +LTLIB = lib.exe +LTLINK = $(TCC) -Fe$@ + +# If requested, link to the RPCRT4 library. +# +!IF $(USE_RPCRT4_LIB)!=0 +LTLINK = $(LTLINK) rpcrt4.lib +!ENDIF + +# If a platform was set, force the linker to target that. +# Note that the vcvars*.bat family of batch files typically +# set this for you. Otherwise, the linker will attempt +# to deduce the binary type based on the object files. +!IFDEF PLATFORM +LTLINKOPTS = /NOLOGO /MACHINE:$(PLATFORM) +LTLIBOPTS = /NOLOGO /MACHINE:$(PLATFORM) +!ELSE +LTLINKOPTS = /NOLOGO +LTLIBOPTS = /NOLOGO +!ENDIF + +# When compiling for use in the WinRT environment, the following +# linker option must be used to mark the executable as runnable +# only in the context of an application container. +# +!IF $(FOR_WINRT)!=0 +LTLINKOPTS = $(LTLINKOPTS) /APPCONTAINER +!IF "$(VISUALSTUDIOVERSION)"=="12.0" || "$(VISUALSTUDIOVERSION)"=="14.0" +!IFNDEF STORELIBPATH +!IF "$(PLATFORM)"=="x86" +STORELIBPATH = $(CRTLIBPATH)\store +!ELSEIF "$(PLATFORM)"=="x64" +STORELIBPATH = $(CRTLIBPATH)\store\amd64 +!ELSEIF "$(PLATFORM)"=="ARM" +STORELIBPATH = $(CRTLIBPATH)\store\arm +!ELSE +STORELIBPATH = $(CRTLIBPATH)\store +!ENDIF +!ENDIF +STORELIBPATH = $(STORELIBPATH:\\=\) +LTLINKOPTS = $(LTLINKOPTS) "/LIBPATH:$(STORELIBPATH)" +!ENDIF +!ENDIF + +# When compiling for Windows Phone 8.1, an extra library path is +# required. +# +!IF $(USE_WP81_OPTS)!=0 +!IFNDEF WP81LIBPATH +!IF "$(PLATFORM)"=="x86" +WP81LIBPATH = $(PROGRAMFILES_X86)\Windows Phone Kits\8.1\lib\x86 +!ELSEIF "$(PLATFORM)"=="ARM" +WP81LIBPATH = $(PROGRAMFILES_X86)\Windows Phone Kits\8.1\lib\ARM +!ELSE +WP81LIBPATH = $(PROGRAMFILES_X86)\Windows Phone Kits\8.1\lib\x86 +!ENDIF +!ENDIF +!ENDIF + +# When compiling for Windows Phone 8.1, some extra linker options +# are also required. +# +!IF $(USE_WP81_OPTS)!=0 +!IFDEF WP81LIBPATH +LTLINKOPTS = $(LTLINKOPTS) "/LIBPATH:$(WP81LIBPATH)" +!ENDIF +LTLINKOPTS = $(LTLINKOPTS) /DYNAMICBASE +LTLINKOPTS = $(LTLINKOPTS) WindowsPhoneCore.lib RuntimeObject.lib PhoneAppModelHost.lib +LTLINKOPTS = $(LTLINKOPTS) /NODEFAULTLIB:kernel32.lib /NODEFAULTLIB:ole32.lib +!ENDIF + +# When compiling for UWP or the Windows 10 platform, some extra linker +# options are also required. +# +!IF $(FOR_UWP)!=0 || $(FOR_WIN10)!=0 +LTLINKOPTS = $(LTLINKOPTS) /DYNAMICBASE /NODEFAULTLIB:kernel32.lib +LTLINKOPTS = $(LTLINKOPTS) mincore.lib +!IFDEF PSDKLIBPATH +LTLINKOPTS = $(LTLINKOPTS) "/LIBPATH:$(PSDKLIBPATH)" +!ENDIF +!ENDIF + +!IF $(FOR_WIN10)!=0 +LTLINKOPTS = $(LTLINKOPTS) /guard:cf "/LIBPATH:$(UCRTLIBPATH)" +!IF $(DEBUG)>1 +LTLINKOPTS = $(LTLINKOPTS) /NODEFAULTLIB:libucrtd.lib /DEFAULTLIB:ucrtd.lib +!ELSE +LTLINKOPTS = $(LTLINKOPTS) /NODEFAULTLIB:libucrt.lib /DEFAULTLIB:ucrt.lib +!ENDIF +!ENDIF + +# If either debugging or symbols are enabled, enable PDBs. +# +!IF $(DEBUG)>1 || $(SYMBOLS)!=0 +LDFLAGS = /DEBUG $(LDOPTS) +!ELSE +LDFLAGS = $(LDOPTS) +!ENDIF + + +# You should not have to change anything below this line +############################################################################### + + +# Object files for the amalgamation. +# +LIBOBJS1 = sqlite3.lo + +# Determine the real value of LIBOBJ based on the 'configure' script +# +LIBOBJ = $(LIBOBJS1) + +# Determine if embedded resource compilation and usage are enabled. +# +!IF $(USE_RC)!=0 +LIBRESOBJS = sqlite3res.lo +!ELSE +LIBRESOBJS = +!ENDIF + + +# Additional compiler options for the shell. These are only effective +# when the shell is not being dynamically linked. +# +!IF $(DYNAMIC_SHELL)==0 && $(FOR_WIN10)==0 +SHELL_COMPILE_OPTS = $(SHELL_COMPILE_OPTS) -DSQLITE_SHELL_JSON1 -DSQLITE_ENABLE_FTS4 -DSQLITE_ENABLE_EXPLAIN_COMMENTS +!ENDIF + + +# This is the default Makefile target. The objects listed here +# are what get build when you type just "make" with no arguments. +# +all: dll shell + +# Dynamic link library section. +# +dll: $(SQLITE3DLL) + +# Shell executable. +# +shell: $(SQLITE3EXE) + + +$(SQLITE3DLL): $(LIBOBJ) $(LIBRESOBJS) $(CORE_LINK_DEP) + $(LD) $(LDFLAGS) $(LTLINKOPTS) $(LTLIBPATHS) /DLL $(CORE_LINK_OPTS) /OUT:$@ $(LIBOBJ) $(LIBRESOBJS) $(LTLIBS) $(TLIBS) + +Replace.exe: + $(CSC) /target:exe $(TOP)\Replace.cs + +sqlite3.def: Replace.exe $(LIBOBJ) + echo EXPORTS > sqlite3.def + dumpbin /all $(LIBOBJ) \ + | .\Replace.exe "^\s+/EXPORT:_?(sqlite3_[^@,]*)(?:@\d+|,DATA)?$$" $$1 true \ + | sort >> sqlite3.def + +$(SQLITE3EXE): $(TOP)\shell.c $(SHELL_CORE_DEP) $(LIBRESOBJS) $(SHELL_CORE_SRC) $(SQLITE3H) + $(LTLINK) $(SHELL_COMPILE_OPTS) $(READLINE_FLAGS) $(TOP)\shell.c $(SHELL_CORE_SRC) \ + /link $(SQLITE3EXEPDB) $(LDFLAGS) $(LTLINKOPTS) $(SHELL_LINK_OPTS) $(LTLIBPATHS) $(LIBRESOBJS) $(LIBREADLINE) $(LTLIBS) $(TLIBS) + + +# Rule to build the amalgamation +# +sqlite3.lo: $(SQLITE3C) + $(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(SQLITE3C) + + +# Rule to build the Win32 resources object file. +# +!IF $(USE_RC)!=0 +_HASHCHAR=^# +!IF ![echo !IFNDEF VERSION > rcver.vc] && \ + ![for /F "delims=" %V in ('type "$(SQLITE3H)" ^| find "$(_HASHCHAR)define SQLITE_VERSION "') do (echo VERSION = ^^%V >> rcver.vc)] && \ + ![echo !ENDIF >> rcver.vc] +!INCLUDE rcver.vc +!ENDIF + +RESOURCE_VERSION = $(VERSION:^#=) +RESOURCE_VERSION = $(RESOURCE_VERSION:define=) +RESOURCE_VERSION = $(RESOURCE_VERSION:SQLITE_VERSION=) +RESOURCE_VERSION = $(RESOURCE_VERSION:"=) +RESOURCE_VERSION = $(RESOURCE_VERSION:.=,) + +$(LIBRESOBJS): $(TOP)\sqlite3.rc rcver.vc $(SQLITE3H) + echo #ifndef SQLITE_RESOURCE_VERSION > sqlite3rc.h + echo #define SQLITE_RESOURCE_VERSION $(RESOURCE_VERSION) >> sqlite3rc.h + echo #endif >> sqlite3rc.h + $(LTRCOMPILE) -fo $(LIBRESOBJS) -DRC_VERONLY $(TOP)\sqlite3.rc +!ENDIF + + +clean: + del /Q *.exp *.lo *.ilk *.lib *.obj *.ncb *.pdb *.sdf *.suo 2>NUL *** DIFF OUTPUT TRUNCATED AT 1000 LINES ***
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201608240457.u7O4vUlf043748>