Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 29 Nov 2018 14:46:47 +1100
From:      Brian Scott <bscott@bunyatech.com.au>
To:        Hans Petter Selasky <hps@selasky.org>, freebsd-arm@freebsd.org
Subject:   Re: Raspberry PI 2B/3 and USB audio
Message-ID:  <c5b8e442-b675-eb29-c880-f62282bc6719@bunyatech.com.au>
In-Reply-To: <ed084844-2f24-fe91-ed33-f19b0cb82649@selasky.org>
References:  <87ftw96uq0.wl-herbert@gojira.at> <6beca923-ba25-3814-6bb2-f4cc2d7360d3@selasky.org> <875zx2hyey.wl-herbert@gojira.at> <87lg5fhcgz.wl-herbert@gojira.at> <87k1kzhb8j.wl-herbert@gojira.at> <9dda25f1-9b52-2a50-1b55-00cccee8ee98@selasky.org> <856136a7-c58f-dda0-d50c-f9da55e5eb88@bunyatech.com.au> <b5d07fe0-8b1a-9b59-3241-1bfe7f72b096@selasky.org> <eeca436f-a5b3-2017-9a8d-41c8365dd46b@bunyatech.com.au> <c08832bf-73a0-11aa-729e-bcd4f44cbb39@selasky.org> <7bee717d-70e5-5f09-d5c4-96c72ddbd2f9@bunyatech.com.au> <ed084844-2f24-fe91-ed33-f19b0cb82649@selasky.org>

next in thread | previous in thread | raw e-mail | index | archive | help
On 28/11/18 10:40 pm, Hans Petter Selasky wrote:
> On 11/28/18 11:28 AM, Brian Scott wrote:
>> On 28/11/18 9:22 pm, Hans Petter Selasky wrote:
>>> On 11/28/18 11:13 AM, Brian Scott wrote:
>>>> On 28/11/18 7:45 pm, Hans Petter Selasky wrote:
>>>>> On 11/28/18 1:46 AM, Brian Scott wrote:
>>>>>> On 27/11/18 6:38 pm, Hans Petter Selasky wrote:
>>>>>>> On 11/26/18 8:47 PM, Herbert J. Skuhra wrote:
>>>>>>>> Well, this USB sound card works perfectly fine on my desktop PC
>>>>>>>> running FreeBSD (amd64).
>>>>>>>
>>>>>>> Hi,
>>>>>>>
>>>>>>> There is a problem in the DWC OTG USB controller driver that it
>>>>>>> cannot
>>>>>>> handle the big data payload 24-bit 48KHz sampling requires.
>>>>>>> Unfortunately your device has only one sample size selection.
>>>>>>>
>>>>>>> If you buy a USB sound device marked as "HIGH SPEED USB" it should
>>>>>>> work. Yours is "spd=FULL".
>>>>>>>
>>>>>>> --HPS
>>>>>> Just an additional data point,
>>>>>>
>>>>>> This one also sounds like junk but is high speed:
>>>>>>
>>>>>>        ugen0.6: <Generic USB Audio> at usbus0, cfg=0 md=HOST
>>>>>> spd=HIGH
>>>>>>        (480Mbps) pwr=ON (100mA)
>>>>>>
>>>>>>          bLength = 0x0012
>>>>>>          bDescriptorType = 0x0001
>>>>>>          bcdUSB = 0x0200
>>>>>>          bDeviceClass = 0x0000  <Probed by interface class>
>>>>>>          bDeviceSubClass = 0x0000
>>>>>>          bDeviceProtocol = 0x0000
>>>>>>          bMaxPacketSize0 = 0x0040
>>>>>>          idVendor = 0x0bda
>>>>>>          idProduct = 0x4040
>>>>>>          bcdDevice = 0x0000
>>>>>>          iManufacturer = 0x0003  <Generic>
>>>>>>          iProduct = 0x0001  <USB Audio>
>>>>>>          iSerialNumber = 0x0002  <201405280001>
>>>>>>          bNumConfigurations = 0x0001
>>>>>>
>
> Hi,
>
> Can you also dump the device descriptors?
>
> usbconfig -d 0.6 dump_curr_config_desc
>
>
> And can you capture with usbdump some traffic while doing playback?
>
> usbdump -i usbus0 -f 6 -s 65536 -vvv > ~/log.txt
>
>
> And this device works fine using a regular PC with FreeBSD installed?
>
> --HPS

Also, further to my previous email, when I removed the adapter to test
elsewhere I started getting:

Nov 29 14:01:51 time kernel: ugen0.6: <Generic USB Audio> at usbus0
(disconnected)
Nov 29 14:01:51 time kernel: uaudio0: at uhub1, port 4, addr 6
(disconnected)
Nov 29 14:01:51 time kernel: pcm0: unregister: mixer busy
Nov 29 14:01:51 time kernel: pcm0: Waiting for sound application to exit!
Nov 29 14:01:54 time kernel: pcm0: unregister: mixer busy
Nov 29 14:01:54 time kernel: pcm0: Waiting for sound application to exit!
Nov 29 14:01:56 time kernel: pcm0: unregister: mixer busy
Nov 29 14:01:56 time kernel: pcm0: Waiting for sound application to exit!
Nov 29 14:01:57 time kernel: pcm0: unregister: mixer busy
Nov 29 14:01:57 time kernel: pcm0: Waiting for sound application to exit!
Nov 29 14:02:00 time kernel: pcm0: unregister: mixer busy
Nov 29 14:02:00 time kernel: pcm0: Waiting for sound application to exit!
Nov 29 14:02:02 time kernel: pcm0: unregister: mixer busy
Nov 29 14:02:02 time kernel: pcm0: Waiting for sound application to exit!

The USB connected keyboard and mouse are frozen.

Cheers,

Brian




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?c5b8e442-b675-eb29-c880-f62282bc6719>