Date: Mon, 28 Feb 2022 14:36:13 -0500 From: mike tancsa <mike@sentex.net> To: FreeBSD-STABLE Mailing List <freebsd-stable@freebsd.org> Cc: Navdeep Parhar <np@FreeBSD.org> Subject: cxgbe firmware error on latest RELENG_13 Message-ID: <49736514-6500-4c7d-889d-15697d934f04@sentex.net>
next in thread | raw e-mail | index | archive | help
Hi Navdeep, I updated a pair of releng13 boxes today as I saw there are new drivers/firmware. However, the firmware seems to fail on both in different ways t5nex0: <Chelsio T540-CR> mem 0x91300000-0x9137ffff,0x90000000-0x90ffffff,0x91984000-0x91985fff irq 17 at device 0.4 on pci2 t5nex0: failed to load firmware module: 2. cfg 0, fw 0 t5nex0: firmware on card (1.25.0.40) is older than the version bundled with this driver, but the driver cannot take corrective action because it is unable to load the firmware module. t5nex0: KLD with default config is not available. t5nex0: failed to upload config file to card: 2. t5nex0: failed (2) to configure card with "default" profile, will fall back to a basic configuration and retry. cxl0: <port 0> on t5nex0 cxl0: Ethernet address: 00:07:43:29:98:90 cxl0: 12 txq, 8 rxq (NIC) cxl1: <port 1> on t5nex0 cxl1: Ethernet address: 00:07:43:29:98:98 cxl1: 12 txq, 8 rxq (NIC) cxl2: <port 2> on t5nex0 cxl2: Ethernet address: 00:07:43:29:98:a0 cxl2: 12 txq, 8 rxq (NIC) cxl3: <port 3> on t5nex0 cxl3: Ethernet address: 00:07:43:29:98:a8 cxl3: 12 txq, 8 rxq (NIC) t5nex0: PCIe gen3 x8, 4 ports, 34 MSI-X interrupts, 84 eq, 33 iq And on another adapter, different box t5nex0: <Chelsio T520-LL-CR> mem 0xb2300000-0xb237ffff,0xb1000000-0xb1ffffff,0xb28a0000-0xb28a1fff irq 16 at device 0.4 on pci1 t5nex0: command 0x4 in mbox 4 timed out (0x80000000). t5nex0: mbox 4 cmdsent 04a0000000000001 0f41000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 t5nex0: mbox 4 current 04a0000000000001 0f41000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 t5nex0: firmware reports adapter error: Crash (0x80000000) t5nex0: device log follows. Seq# Tstamp Level Facility Message 0 507376 INFO CORE log initialized @ 0x200a0000 size 32768 (128 entries) fwrev 0x011a0200 pcie_fw 0x00000000 1 510262 INFO CORE bootstrap firmware took 605 msecs to run 2 511784 INFO CORE Serial Configuration version: 0x11101000 VPD version: 0x2 3 511785 NOTICE CORE pcie: Serial Configuration SPARE3 has Cookie Generation enabled. 4 511786 INFO CORE pcie: npf 7 (pfbitmap 0x7f) nvf 64 (pf 0..7 0x1010101000000000) vfstride 4 t5nex0: encountered fatal error, adapter stopped. t5nex0: firmware reports adapter error: Crash (0x80000000) t5nex0: device log follows. Seq# Tstamp Level Facility Message 0 507376 INFO CORE log initialized @ 0x200a0000 size 32768 (128 entries) fwrev 0x011a0200 pcie_fw 0x00000000 1 510262 INFO CORE bootstrap firmware took 605 msecs to run 2 511784 INFO CORE Serial Configuration version: 0x11101000 VPD version: 0x2 3 511785 NOTICE CORE pcie: Serial Configuration SPARE3 has Cookie Generation enabled. 4 511786 INFO CORE pcie: npf 7 (pfbitmap 0x7f) nvf 64 (pf 0..7 0x1010101000000000) vfstride 4 t5nex0: failed to connect to the firmware: 6, 0. PCIE_FW 0x80000000 t5nex0: error during attach, adapter is now in recovery mode. none0@pci0:1:0:5: class=0x010000 rev=0x00 hdr=0x00 vendor=0x1425 device=0x5511 subvendor=0x1425 subdevice=0x0000 vendor = 'Chelsio Communications Inc' device = 'T520-LL-CR Unified Wire Storage Controller' class = mass storage subclass = SCSI bar [10] = type Memory, range 64, base 0xb2280000, size 524288, enabled bar [18] = type Memory, range 64, base 0xb2200000, size 524288, enabled bar [20] = type Memory, range 64, base 0xb2890000, size 8192, enabled cap 01[40] = powerspec 3 supports D0 D3 current D0 cap 05[50] = MSI supports 32 messages, 64 bit, vector masks cap 10[70] = PCI-Express 2 endpoint max data 256(2048) FLR RO max read 512 link x8(x8) speed 8.0(8.0) ASPM disabled(L0s/L1) cap 11[b0] = MSI-X supports 40 messages Table in map 0x20[0x0], PBA in map 0x20[0x1000] cap 03[d0] = VPD ecap 0001[100] = AER 2 1 fatal 0 non-fatal 0 corrected ecap 0003[170] = Serial 1 0000000000000000 ecap 000e[190] = ARI 1 ecap 0019[1a0] = PCIe Sec 1 lane errors 0 ecap 0010[1c0] = SR-IOV 1 IOV disabled, Memory Space disabled, ARI disabled 0 VFs configured out of 0 supported First VF RID Offset 0x0008, VF RID Stride 0x0004 VF Device ID 0x5811 Page Sizes: 4096 (enabled), 8192, 65536, 262144, 1048576, 4194304 ecap 0017[200] = TPH Requester 1 none1@pci0:1:0:6: class=0x0c0400 rev=0x00 hdr=0x00 vendor=0x1425 device=0x5611 subvendor=0x1425 subdevice=0x0000 vendor = 'Chelsio Communications Inc' device = 'T520-LL-CR Unified Wire Storage Controller' class = serial bus subclass = Fibre Channel bar [10] = type Memory, range 64, base 0xb2100000, size 524288, enabled bar [18] = type Memory, range 64, base 0xb2080000, size 524288, enabled bar [20] = type Memory, range 64, base 0xb2880000, size 8192, enabled cap 01[40] = powerspec 3 supports D0 D3 current D0 cap 05[50] = MSI supports 32 messages, 64 bit, vector masks cap 10[70] = PCI-Express 2 endpoint max data 256(2048) FLR RO max read 512 link x8(x8) speed 8.0(8.0) ASPM disabled(L0s/L1) cap 11[b0] = MSI-X supports 40 messages Table in map 0x20[0x0], PBA in map 0x20[0x1000] cap 03[d0] = VPD ecap 0001[100] = AER 2 1 fatal 0 non-fatal 0 corrected ecap 0003[170] = Serial 1 0000000000000000 ecap 000e[190] = ARI 1 ecap 0019[1a0] = PCIe Sec 1 lane errors 0 ecap 0010[1c0] = SR-IOV 1 IOV disabled, Memory Space disabled, ARI disabled 0 VFs configured out of 0 supported First VF RID Offset 0x0008, VF RID Stride 0x0004 VF Device ID 0x5811 Page Sizes: 4096 (enabled), 8192, 65536, 262144, 1048576, 4194304 ecap 0017[200] = TPH Requester 1 t5iov3@pci0:2:0:3: class=0x020000 rev=0x00 hdr=0x00 vendor=0x1425 device=0x5003 subvendor=0x1425 subdevice=0x0000 vendor = 'Chelsio Communications Inc' device = 'T540-CR Unified Wire Ethernet Controller' class = network subclass = ethernet bar [10] = type Memory, range 64, base 0x91480000, size 524288, enabled bar [18] = type Memory, range 64, base 0x91400000, size 524288, enabled bar [20] = type Memory, range 64, base 0x91986000, size 8192, enabled cap 01[40] = powerspec 3 supports D0 D3 current D0 cap 05[50] = MSI supports 8 messages, 64 bit, vector masks cap 10[70] = PCI-Express 2 endpoint max data 256(2048) FLR RO max read 512 link x8(x8) speed 8.0(8.0) ASPM L0s/L1(L0s/L1) cap 11[b0] = MSI-X supports 8 messages Table in map 0x20[0x0], PBA in map 0x20[0x1000] cap 03[d0] = VPD ecap 0001[100] = AER 2 0 fatal 0 non-fatal 1 corrected ecap 0003[170] = Serial 1 0000000000000000 ecap 000e[190] = ARI 1 ecap 0019[1a0] = PCIe Sec 1 lane errors 0 ecap 0010[1c0] = SR-IOV 1 IOV disabled, Memory Space disabled, ARI disabled 0 VFs configured out of 16 supported First VF RID Offset 0x0008, VF RID Stride 0x0004 VF Device ID 0x5803 Page Sizes: 4096 (enabled), 8192, 65536, 262144, 1048576, 4194304 ecap 0017[200] = TPH Requester 1 t5nex0@pci0:2:0:4: class=0x020000 rev=0x00 hdr=0x00 vendor=0x1425 device=0x5403 subvendor=0x1425 subdevice=0x0000 vendor = 'Chelsio Communications Inc' device = 'T540-CR Unified Wire Ethernet Controller' class = network subclass = ethernet bar [10] = type Memory, range 64, base 0x91300000, size 524288, enabled bar [18] = type Memory, range 64, base 0x90000000, size 16777216, enabled bar [20] = type Memory, range 64, base 0x91984000, size 8192, enabled cap 01[40] = powerspec 3 supports D0 D3 current D0 cap 05[50] = MSI supports 32 messages, 64 bit, vector masks cap 10[70] = PCI-Express 2 endpoint max data 256(2048) FLR max read 4096 link x8(x8) speed 8.0(8.0) ASPM L0s/L1(L0s/L1) cap 11[b0] = MSI-X supports 128 messages, enabled Table in map 0x20[0x0], PBA in map 0x20[0x1000] cap 03[d0] = VPD ecap 0001[100] = AER 2 0 fatal 0 non-fatal 1 corrected ecap 0003[170] = Serial 1 0000000000000000 ecap 000e[190] = ARI 1 ecap 0019[1a0] = PCIe Sec 1 lane errors 0 ecap 0010[1c0] = SR-IOV 1 IOV disabled, Memory Space disabled, ARI disabled 0 VFs configured out of 0 supported First VF RID Offset 0x0008, VF RID Stride 0x0004 VF Device ID 0x5803 Page Sizes: 4096 (enabled), 8192, 65536, 262144, 1048576, 4194304 ecap 0017[200] = TPH Requester 1 none7@pci0:2:0:5: class=0x010000 rev=0x00 hdr=0x00 vendor=0x1425 device=0x5503 subvendor=0x1425 subdevice=0x0000 vendor = 'Chelsio Communications Inc' device = 'T540-CR Unified Wire Storage Controller' class = mass storage subclass = SCSI bar [10] = type Memory, range 64, base 0x91280000, size 524288, enabled bar [18] = type Memory, range 64, base 0x91200000, size 524288, enabled bar [20] = type Memory, range 64, base 0x91982000, size 8192, enabled cap 01[40] = powerspec 3 supports D0 D3 current D0 cap 05[50] = MSI supports 32 messages, 64 bit, vector masks cap 10[70] = PCI-Express 2 endpoint max data 256(2048) FLR RO max read 512 link x8(x8) speed 8.0(8.0) ASPM L0s/L1(L0s/L1) cap 11[b0] = MSI-X supports 40 messages Table in map 0x20[0x0], PBA in map 0x20[0x1000] cap 03[d0] = VPD ecap 0001[100] = AER 2 0 fatal 0 non-fatal 1 corrected ecap 0003[170] = Serial 1 0000000000000000 ecap 000e[190] = ARI 1 ecap 0019[1a0] = PCIe Sec 1 lane errors 0 ecap 0010[1c0] = SR-IOV 1 IOV disabled, Memory Space disabled, ARI disabled 0 VFs configured out of 0 supported First VF RID Offset 0x0008, VF RID Stride 0x0004 VF Device ID 0x5803 Page Sizes: 4096 (enabled), 8192, 65536, 262144, 1048576, 4194304 ecap 0017[200] = TPH Requester 1 none8@pci0:2:0:6: class=0x0c0400 rev=0x00 hdr=0x00 vendor=0x1425 device=0x5603 subvendor=0x1425 subdevice=0x0000 vendor = 'Chelsio Communications Inc' device = 'T540-CR Unified Wire Storage Controller' class = serial bus subclass = Fibre Channel bar [10] = type Memory, range 64, base 0x91100000, size 524288, enabled bar [18] = type Memory, range 64, base 0x91080000, size 524288, enabled bar [20] = type Memory, range 64, base 0x91980000, size 8192, enabled cap 01[40] = powerspec 3 supports D0 D3 current D0 cap 05[50] = MSI supports 32 messages, 64 bit, vector masks cap 10[70] = PCI-Express 2 endpoint max data 256(2048) FLR RO max read 512 link x8(x8) speed 8.0(8.0) ASPM L0s/L1(L0s/L1) cap 11[b0] = MSI-X supports 40 messages Table in map 0x20[0x0], PBA in map 0x20[0x1000] cap 03[d0] = VPD ecap 0001[100] = AER 2 0 fatal 0 non-fatal 1 corrected ecap 0003[170] = Serial 1 0000000000000000 ecap 000e[190] = ARI 1 ecap 0019[1a0] = PCIe Sec 1 lane errors 0 ecap 0010[1c0] = SR-IOV 1 IOV disabled, Memory Space disabled, ARI disabled 0 VFs configured out of 0 supported First VF RID Offset 0x0008, VF RID Stride 0x0004 VF Device ID 0x5803 Page Sizes: 4096 (enabled), 8192, 65536, 262144, 1048576, 4194304 ecap 0017[200] = TPH Requester 1 # git status On branch stable/13 Your branch is up to date with 'origin/stable/13'. nothing to commit, working tree clean 13.1-PRERELEASE FreeBSD 13.1-PRERELEASE #1 stable/13-226bb05eb: Mon Feb 28 15:03:59 EST 2022 Loader.conf is t5fw_cfg_load="YES" if_cxgbe_load="YES" hw.cxgbe.pause_settings="0" hw.cxgbe.attack_filter="1" hw.cxgbe.drop_pkts_with_l3_errors="1" hw.cxgbe.fcoecaps_allowed="0" ---Mike
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?49736514-6500-4c7d-889d-15697d934f04>